Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: 70's apartments

User: dhsvcs, Location: miami

Asked on: Friday, September 27, 2024 at 2:10 am EDT
Answered on: Thursday, March 6, 2025 at 3:02 am EST

Question: I am reviewing a building which is now, for the 1st time, being required to have a 40 yr electrical inspection. The kitchens are lacking gfci recepts and have only3-20 amp circuits. One feeds the refrigerator, one feeds the disposal, and one feeds the counter receptacles. The apartments were built in the early 70's.It looks like that was the way they were originally wired. I know common sense would dictate better power distribution, but is there a way this could have been installed legally or grand fathered in ?Thanx, dhsvcs

Okay, let's break down the situation of these kitchens built in the early 1970s being inspected now and potentially not meeting current GFCI requirements.

Key Considerations and Code History "Grandfathering" (Legally Installed at the Time)

This is the most likely scenario. Electrical codes change over time. If the original installation complied with the electrical code in effect
at the time of construction (early 1970s), it was likely considered a legal and safe installation. The concept of "grandfathering" means that compliant installations don't automatically have to be upgraded to meet current code unless there's a major renovation, alteration, or safety issue. However, many jurisdictions require upgrades to meet the current code at time of resale or change in use.

GFCI Requirements: NEC History
GFCI protection wasn't widely required in dwelling unit kitchens until later. Here's a simplified history to give you context: Pre-1971

GFCI requirements were almost non-existent in residential settings.


1971 NEC

GFCI protection started to appear, but mostly for outdoor receptacles near swimming pools.

1975 NEC

GFCI protection requirements expanded to include bathroom receptacles.


1978 NEC

GFCI protection required for receptacles in garages.

1987 NEC

GFCI protection required for receptacles within 6 feet of a kitchen sink.


1990 NEC

GFCI protection expanded to cover all receptacles serving kitchen countertops.

Later

Additional changes and refinements have occurred, broadening the coverage.


3-20 Amp Circuits - Potential Adequacy (Historically)

For a small kitchen in the early 1970s, 3 x 20 amp circuits could have been considered code-compliant. Remember, appliances were generally less power-hungry back then, and smaller kitchens were more common.

"40-Year Inspection" Requirements

Understand the
specific legal basis and scope of the 40-year inspection requirement in your jurisdiction. What specific code edition is being enforced? Does it mandate upgrades to current code, or does it focus on safety and functionality based on the original code?

How to Determine Compliance and Next Steps
1. Identify the Code in Effect at Time of Construction

This is absolutely
critical. You need to determine which edition of the National Electrical Code (NEC) or local electrical code was in effect when the building was originally built (early 1970s). Building permits usually indicate this. Your local building department or historical records can provide this information. This will tell you what was required then.2.

Review the Current Inspection Requirements

Get a
written copy of the rules governing this 40-year inspection. What specific code edition is the inspector using? What are the triggers for requiring upgrades? Is it based purely on life-safety issues or full code compliance?3.

Consult the Specific Code Language

Once you know the relevant code editions,
read the specific sections of the code relating to kitchen circuits and GFCI requirements for those years. Understand the actual wording.4.

Evaluate Based on Original Code

Does the existing installation comply with the code that was in effect at the time of construction? If so, it might be grandfathered,
depending on the rules of the current inspection.5.

Evaluate Based on Current Code and Inspection Requirements

If the inspection requires compliance with current code (or triggers upgrades based on certain factors), the lack of GFCI protection on countertop receptacles will almost certainly be a violation. The limited number of circuits may also be flagged as inadequate given modern appliance usage.6.

Consider the Inspector's Interpretation

Electrical code interpretation can sometimes be subjective. Discuss your findings with the inspector. Present your evidence regarding the original code compliance. Try to understand their reasoning for any required upgrades.7.

Professional Opinion

Consult with a licensed electrical contractor who is
experienced with older buildings and code compliance issues. They can provide an expert opinion and help you negotiate with the inspector if needed.

Possible Outcomes and Solutions
Grandfathering Upheld

If the original installation met the code at the time, and the 40-year inspection doesn't require full upgrades to current code, the existing wiring might be allowed to remain as-is (with any identified safety issues addressed).

GFCI Upgrades Required

This is the most likely scenario. You'll need to install GFCI protection on all receptacles serving the kitchen countertops. This could be done using:


GFCI Receptacles

Replace existing receptacles with GFCI receptacles.

GFCI Circuit Breakers

Install GFCI circuit breakers in the electrical panel to protect the entire circuit.


Circuit Upgrades Recommended or Required

The inspector might argue that 3 x 20 amp circuits are simply inadequate for a modern kitchen and require additional circuits to be added. This is a more complex and expensive upgrade, potentially requiring new wiring runs.

Important Cautions
Safety First

Even if grandfathered, seriously consider upgrading to GFCI protection for safety reasons, especially near water.


Don't Assume

Don't assume the existing wiring is inherently unsafe just because it doesn't meet current code. If it's in good condition and was properly installed, it might be perfectly safe.*

Documentation:
Keep thorough records of all inspections, code research, and any upgrades performed.In summary, research the code requirements in place at the time of construction to determine if the original wiring was compliant and safe. Then determine the requirements of the 40-year inspection and if there are any specific mandates for bringing the electrical systems up to current code. Flag for review

Previous Question Next Question