Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: White stuff on a splice

User: Tainted, Location: New York

Asked on: Friday, September 27, 2024 at 9:40 am EDT
Answered on: Thursday, March 6, 2025 at 3:03 am EST

Question: There is white stuff on a splice in a service end box. What is this? These are service conductors.

The white stuff on a splice in a service end box, particularly on service conductors, is most likely corrosion or oxidation. Here's a breakdown of the possibilities and why: Corrosion/Oxidation

This is the most common culprit. When dissimilar metals (like copper and aluminum, if used in the splice) are exposed to moisture and air, a chemical reaction occurs. This creates a white, powdery substance on the metal's surface. The white stuff is the oxidized or corroded metal.
Service conductors are exposed to the elements. Condensation, humidity, and temperature changes can accelerate corrosion.

Electrolytic Corrosion

If there is moisture and dissimilar metals in contact (such as a copper connector on an aluminum conductor), electrolysis can occur. This accelerates corrosion.

Why is it a concern?
Increased Resistance

Corrosion increases the electrical resistance at the splice. This can lead to:

Heat

Increased resistance generates heat, which can damage the insulation, connectors, and even cause a fire.


Voltage Drop

The increased resistance can cause a voltage drop downstream, affecting the performance of electrical equipment.

Connection Failure

Severe corrosion can weaken the connection, leading to eventual failure.

What to do



Safety First: Disconnect the power! This is crucial before inspecting or working on service conductors.
1. Inspect Thoroughly

Carefully examine the splice, the conductors, and the surrounding area. Look for:
Loose connections Damaged insulation Signs of overheating (melted or discolored materials) The type of metals used in the splice and conductors.2.

Determine the Cause

Try to identify the source of moisture or contamination. Is the box properly sealed? Is there evidence of water intrusion?3.

Repair or Replace

The action to take depends on the severity of the corrosion and the condition of the splice:


Minor Corrosion (Surface Level)

Clean the corroded area with a wire brush (for conductors) or a suitable cleaning agent.

Use a wire brush specifically designed for the conductor material (copper or aluminum)
. Apply an anti-oxidant compound specifically designed for electrical connections (such as Penetrox or Noalox) to the conductors and connectors before reassembling the splice. This compound helps prevent further corrosion and improves conductivity. Ensure the connection is tight. Severe Corrosion, Damaged Conductors, or Damaged Connectors



Replace the splice and any damaged conductors.
This is the safest and most reliable solution. Use connectors and splicing methods approved for the conductor types and sizes involved. Consider replacing the entire service entrance cable if corrosion is widespread.4. Prevent Future Corrosion

Ensure the service entrance box is properly sealed to prevent moisture from entering. Use connectors and splicing methods appropriate for the types of conductors being joined. Regularly inspect the service entrance for signs of corrosion.

Important Considerations



Working with service conductors is dangerous and often requires specialized knowledge and equipment.
If you're not comfortable or experienced, hire a qualified electrician. Local codes and regulations may dictate specific requirements for service entrance wiring. Ensure that any repairs or replacements comply with these requirements. If you suspect water damage or a potential hazard, contact the utility company immediately.In summary, the white stuff is most likely corrosion and needs to be addressed to prevent electrical problems. Disconnect the power, thoroughly inspect the splice, and take appropriate action to clean, repair, or replace the components as needed. When in doubt, consult a qualified electrician. Flag for review

Previous Question Next Question