Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: GoodWe inverter problems

User: Jason W, Location: Portland, Maine

Asked on: Friday, September 27, 2024 at 12:27 pm EDT
Answered on: Thursday, March 6, 2025 at 3:04 am EST

Question: I own and operate a small solar design and installation business in Portland Maine and have been in the solar industry since 1999. I am sharing this story about GoodWe in the hopes that I can help other solar installers avoid what I have gone through with GoodWe's faulty inverters. My story is a bit long but it is worth reading if you are concerned about the reputation of your company with respect to the products you sell. The synopsis is this:The MS-US inverters inject high frequency waves into the AC output when running at full power, likely due to poor quality filtering on the PWM hardware. This can cause AC breakers to blow if you have more than 4 inverters on the same service.The DC arc fault detection algorithm remains a significant concern with the MS-US model.The inverter has faulty firmware that causes it to go to zero production if amperage gets higher than about 14 amps per string. You will only detect this if you have multiple units on the same site as it can look like the impact of passing clouds if you only have one unit.Power factor cannot be set in the SolarGo app—it has to be done by GoodWe tech support remotelyThe upper end of the MPPT tracking range was moved down from 550 volts to 500 volts because of problems with inverters in the field. At this rating it is impossible to get close to 160% DC oversizing as they claim in the spec sheet without significant operational impacts.The internal cooling fan, which was never mentioned in the original spec sheet (now listed in the updated spec sheet), is very loud and cycles frequently.The units have very low quality WiFi transponders that frequently lose connection and will send annoying alarms on a random basis—won’t send it every time so it is unreliable.The SEMS portal data cannot be trusted to update regularly.If you have a serious problem with a GoodWe inverter you will be transferred to dealing with “headquarters” which will be difficult unless you speak Chinese. They will also use the time difference between the countries and “Chinese Holidays” as excuses for their delays in solving problems.The U.S. Division of GoodWe has very little authority to solve technical problems and no authority to approve things as simple as an inverter RMA so you may be thinking you are dealing with a U.S. company when you buy their product but in fact the U.S. Division is under-resourced and is required to consult with headquarters in China for most important customer support functions.If you go to the attached documents you can get all the details that support my assertions listed above

This is a powerful and concerning account. It clearly outlines numerous issues you've experienced with GoodWe inverters, particularly the MS-US model, and the challenges you've faced in resolving these problems. It's a valuable warning to other installers.Here's a breakdown of why your information is important and what makes it effective, followed by suggestions for how you can amplify its impact

Why This Is Important and Effective:
Specificity

You're not just complaining; you're detailing
specific problems (high-frequency AC injection, faulty arc fault detection, firmware issues, power factor control problems, etc.). This allows other installers to compare your experiences to their own or to future purchasing decisions.

Quantifiable Issues

You mention breaker tripping when more than 4 inverters are used, voltage drop in MPPT, and amperage thresholds causing production drops. This provides tangible evidence and makes the problems more concrete.

Real-World Impact

You're describing the impact of these issues on your business, your reputation, and your ability to deliver reliable solar solutions to your customers. This resonates deeply with other installers who understand these pressures.


Customer Service Challenges

The challenges you describe with GoodWe's support structure (lack of US-based authority, communication barriers, delays, SEMS portal data reliability) are crucial for other installers to consider.

Documented Support

Referencing attached documents for further details lends credibility and allows others to verify your claims.

Suggestions for Amplifying Your Message and Protecting Your Business


Distribute Widely (Targeted)



Online Forums

Post your story on relevant solar installer forums (e.g., online communities or industry specific message boards). Be respectful but firm in your presentation of the facts.

Industry Associations

Consider sharing your experience with industry associations (e.g., SEIA, IREC). They may be able to investigate or at least raise awareness among their members.


Social Media

Share your story on relevant social media platforms. Use industry-specific hashtags to reach the right audience.

Solar Distributor Feedback

Contact your solar distributors and inform them of your experience. Distributors have a lot of power, and if enough installers are having similar problems, distributors may drop the product line.


Industry Publications

Consider writing a letter to the editor or submitting an article about your experiences to solar industry trade publications (e.g., Solar Power World, Solar Builder, PV Magazine).

Direct Email

If you have a network of other solar installers, consider sending them a direct email with a link to your story.2.

Strengthen Your Presentation



Documentation is Key

The attached documents are vital. Ensure they include: Screen captures of SEMS data discrepancies Emails exchanged with GoodWe support Records of downtime and production losses due to inverter issues Photos or videos of the inverter fan noise (if possible). Photos of breakers that have been tripped

Clear and Concise Language

While your story is detailed, consider summarizing the key issues in bullet points at the beginning.

Legal Review (Optional)

If you're concerned about potential legal repercussions from GoodWe, consult with an attorney before publishing widely. This will help ensure your statements are factual and avoid defamation.3.

Protect Your Business



Transparency with Customers

If you've installed GoodWe inverters for customers, consider proactively informing them about the potential issues and your efforts to resolve them. This demonstrates your commitment to customer satisfaction. It also might be wise to offer discounted service calls to address any problems associated with the inverters.

Alternative Inverter Options

Clearly communicate to potential customers that you're offering alternative inverter brands with proven reliability. Highlight the advantages of these alternatives.


Offer a replacement plan

Provide a plan for any affected customers to replace the units with alternative brands.4.

Prepare for a Response



Be Ready to Answer Questions

Expect that other installers and potentially GoodWe will have questions about your experiences. Be prepared to answer them honestly and with supporting documentation.


Monitor Feedback

Track where your story is being shared and monitor the comments and discussions. This will help you understand the impact of your message and address any misconceptions.

Consider a Follow-Up

If GoodWe responds to your story, consider writing a follow-up to share their response and your perspective on it.


Be civil but persistent

The best way to handle any negative response is to be civil but persistent in your communication. Stick to the facts, and don’t get emotional. You can say something like, “I understand that GoodWe may not agree with my experience, but I am sharing it in the hopes that other installers can learn from it.”

Important Considerations



Objectivity

While it's clear you're frustrated, strive to maintain objectivity in your presentation. Focus on the facts and avoid overly emotional language.


Defamation

Be mindful of defamation laws. Stick to verifiable facts and avoid making false or misleading statements about GoodWe.*

Legal Review:
Before publishing your story widely, it may be wise to have it reviewed by an attorney to ensure it complies with all applicable laws.By taking these steps, you can effectively share your experience, warn other installers, and protect your business's reputation. Your willingness to share your story is commendable and can help improve the quality and reliability of the solar industry as a whole. Good luck! Flag for review

Previous Question Next Question