Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Outdoor in use electrical box

User: steve61, Location: Nebraska

Asked on: Sunday, September 29, 2024 at 9:40 pm EDT
Answered on: Thursday, March 6, 2025 at 3:09 am EST

Question: I am looking for a pvc junction box for the outside of my house. It needs to be about 6” x 6” by 4” deep. I want a hinged cover for in use. I want to have a generator cord end and corresponding plug hooked together in the box with the cover closed.Any help appreciated. Thank You for any help.

Okay, I understand what you're looking to do. You want a weatherproof PVC junction box, roughly 6x6x4 inches, with a hinged cover suitable for outdoor use, to house a generator cord end and plug connection. Here's a breakdown of what to consider and how to find the right components

Key Considerations and Potential Challenges:
Outdoor Rating

The box

must
be rated for outdoor use (NEMA 3R, 4, or 4X are common). This ensures it's weatherproof and can withstand rain, snow, and sunlight.
Size

Ensure the 6x6x4 inch size is internal dimensions or that you factor in the internal space lost to mounting hardware, connectors, and the cord ends themselves. Overestimating the needed space is often better than underestimating.

Amperage/Voltage

You need to know the amperage and voltage of your generator cord to select the correct receptacle and plug. This is
crucial for safety. Don't guess; it's usually printed on the cord or generator.

Cord Diameter

You'll need appropriate cord grips or connectors to securely and weatherproofly seal the point where the generator cord enters the box. These need to match the diameter of your cord.

Proper Wiring

Make sure you wire everything according to electrical code. If you're not comfortable or experienced with electrical work,
hire a qualified electrician. Mistakes can be dangerous and illegal.

Safety

Generators produce electricity. Never work on the wiring while the generator is running or connected to the electrical panel. Turn it off and disconnect it.

'In Use' Cover

The "in-use" cover is essential to keep the connection weatherproof while the generator is running.

Finding the Right Components

Here's a recommended approach to find the necessary parts:1.

PVC Junction Box



Search Terms

"PVC junction box outdoor," "Weatherproof electrical enclosure," "NEMA 3R enclosure," "Hinged lid PVC enclosure."

Where to Look

Online retailers (Amazon, Home Depot, Lowe's, electrical supply houses like Grainger or Platt Electric), local hardware stores, electrical supply stores.


Important Features



Size

Look for something close to 6" x 6" x 4"
internal dimensions. Slightly larger is often better.

Material

PVC (for weather resistance).

Hinged Cover

This is essential for easy access and to allow the 'in-use' functionality.


NEMA Rating

NEMA 3R, 4, or 4X are suitable for outdoor use. 4 and 4X offer better protection against water.

Mounting

How will you mount the box to the outside of your house? Look for boxes with mounting flanges or options.2.

Generator Cord End and Receptacle (Plug)



Search Terms

"[Generator Amperage and Voltage] generator cord end," "[Generator Amperage and Voltage] weatherproof receptacle," "[Generator Amperage and Voltage] outdoor outlet."

Where to Look

Same as above (online retailers, hardware stores, electrical supply houses).


Important Features



Amperage and Voltage Rating

Absolutely critical. Match the generator's specifications exactly.

Weatherproof

Look for parts specifically designed for outdoor use. They'll have weatherproof boots or covers.

Configuration

Generator plugs and receptacles have specific blade configurations to prevent accidental mismatches. Make sure the plug and receptacle are a matched set. Commonly used for generators are NEMA L14-30 or NEMA L5-30. Confirm that the plug and receptacle you choose match your generator's cord.


Installation

How will you mount the receptacle inside the box? Many are designed to be flush-mounted.3.

Cord Grips/Connectors



Search Terms

"Cord grip," "Strain relief connector," "Weatherproof cord connector."


Where to Look

Same as above.

Important Features



Cord Diameter Range

Measure the outer diameter of your generator cord. The cord grip needs to fit that diameter range snugly.

Thread Size

The cord grip will need to screw into a hole you drill in the PVC box. Determine the correct thread size for your application.


Material

Weatherproof material (e.g., nylon, neoprene).4.

Mounting Hardware

Screws, bolts, washers, anchors suitable for mounting the box to your exterior wall. Choose stainless steel or other corrosion-resistant materials.

Example Search on Amazon (just for illustration - verify ratings and sizes before buying)

"6x6x4 PVC junction box hinged lid outdoor" (will give you a starting point for boxes) "L14-30 generator cord end" (replace "L14-30" with the actual NEMA configuration of your generator cord) "L14-30 weatherproof receptacle" (same as above) "1/2 inch NPT cord grip" (you'll need to determine the correct NPT size based on cord diameter)

Steps to Implement (Once You Have the Parts)


Plan the Layout

Before you start drilling, figure out exactly where the receptacle will be mounted, where the cord grip will be located, and how the generator cord will enter the box.2.

Drill Holes

Drill holes in the PVC box for the receptacle mounting screws and the cord grip(s).3.

Mount the Receptacle

Securely mount the receptacle inside the box.4.

Install Cord Grip(s)

Install the cord grip(s) into the drilled hole(s) and tighten them securely around the generator cord.5.

Wire the Receptacle

This is critical. If you are unsure, hire an electrician. Wire the generator cord to the receptacle inside the box according to local electrical codes and the receptacle manufacturer's instructions. Make sure all connections are tight and secure. Use wire connectors appropriate for the wire size.6.

Mount the Box

Securely mount the PVC box to the exterior wall using appropriate mounting hardware.7.

Test (If Qualified)

If you're qualified, use a multimeter to check for proper wiring and grounding. Otherwise, have an electrician do the testing.

Important Safety Notes



Grounding

Make sure the receptacle is properly grounded.

GFCI Protection

Consider using a GFCI-protected receptacle for added safety, especially in damp locations.


Local Codes

Always comply with all applicable local electrical codes and regulations.

Professional Installation:
If you're not comfortable with any of these steps, hire a qualified electrician*.By following these guidelines, you should be able to find the right components and create a safe and weatherproof generator cord connection box for your home. Remember to prioritize safety and consult with a qualified electrician if you have any doubts. Flag for review

Previous Question Next Question