User: Tainted, Location: New York
Asked on: Sunday, September 29, 2024 at 9:52 pm EDT
Answered on: Thursday, March 6, 2025 at 3:09 am EST
Question: I know I made a similar post about this but I want a dedicated post just on this issue.I am reading this class T fuse series rating chart from Siemens. See red arrow in the picture attached. Is the bottom section where it says "T" for both 300V and 600V class T fuses or is it for 600V only? The fact that Siemens specified (300V) on the top section makes me still doubt that the bottom section applies to both 300V and 600V class T fuses. Really need to know this... What are your thought? See below picture and the chart can be found here:https://support.industry.siemens.com/cs/attachments/109810907/SIE_TA_CircuitBreakerSeriesRatings.pdf
Okay, I understand your confusion. It's a valid point. Let's analyze this based on the document and logical deductions
My Conclusion: The bottom section applies to BOTH 300V and 600V Class T fuses unless explicitly stated otherwise in other footnotes or sections of the document
Here's my reasoning:1. The (300V) Designation
The specific designation of "(300V)" for the top section strongly implies that the information only applies to 300V fuses. If the bottom section were only for 600V, they likely would have indicated that also.2.
Absence of other footnotes We are not given any footnotes or additional clarification that limits the T fuse rating table to a specific voltage in this image.3. Consistency of Column Titles
The column titles are the same for both sections. This suggests a common application across different voltage ratings of Class T fuses. If the bottom section applied only to 600V, there might have been some modification to the column headers to reflect that.
Recommendation:
To be absolutely certain, I highly recommend contacting Siemens directly, their technical support team. Include your photo or a link to the document for context.I hope this clarifies things. Let me know if you have more questions. Flag for review