User: AC\DC, Location: Florence,Oregon,Lane
Asked on: Tuesday, October 1, 2024 at 3:02 pm EDT
Answered on: Thursday, March 6, 2025 at 3:14 am EST
Question: Any one know were if possible I can get a handle tie that can connect 2-2pole br bolt on breakers together. I forgot to order a main breaker in it and it's going to cost 2k each and I am hoping to find a handle tie to turn it into a 4 pole. so I can keep under my 6 disconnect rule.HELP
Okay, let's address this situation with BR bolt-on breakers and handle ties for a 4-pole application to comply with the six disconnect rule.
Understanding the Issue and Code Implications Six Disconnect Rule
NEC (National Electrical Code) generally allows a maximum of six service disconnecting means for a building. Combining multiple breakers with a handle tie can, in some situations, be used to count as a single disconnecting means.
Purpose of Handle Ties
Handle ties are intended to ensure that multiple breakers trip simultaneously under fault conditions. This is critical for safety, especially when dealing with multi-wire branch circuits or equipment that requires simultaneous disconnection of all poles.
BR Bolt-On Breakers
These are Eaton/Cutler-Hammer breakers.
Field Modification Concerns
Modifying listed equipment (like breakers) in the field can void the UL listing and create safety hazards. It is important to use approved accessories and follow manufacturer's instructions.
Here's a breakdown of the options and considerations
Eaton/Cutler-Hammer Factory Handle Ties (The Best Option)
Part Number
The best approach is to use a factory-made handle tie specifically designed and UL-listed for the purpose of connecting two 2-pole BR bolt-on breakers.
Contact Eaton/Cutler-Hammer Directly
The first and most important step is to contact Eaton/Cutler-Hammer customer support or technical support. Explain your situation and ask them if they offer a handle tie for two 2-pole BR bolt-on breakers that would be suitable for creating a 4-pole disconnect. They can provide the correct part number and confirm its suitability.
Check Eaton's Online Resources
Review Eaton's online catalog and technical documents for BR breakers. Look for handle ties or accessories designed for multi-pole applications. Search for "BR breaker accessories" or "BR breaker handle tie."2.
Aftermarket Handle Ties (Proceed with Extreme Caution)
UL Listing is Critical
If you consider an aftermarket handle tie, it must be UL listed specifically for use with BR bolt-on breakers. Do not use a generic handle tie that is not explicitly listed for your breaker type. A UL listing indicates that the handle tie has been tested and evaluated to meet safety standards.
Verify Compatibility
Carefully verify that the aftermarket handle tie is physically compatible with your BR bolt-on breakers. Check the dimensions, mounting points, and how it secures to the breaker handles.
Consider Liability
Using a non-approved handle tie could expose you to liability if there is a fault or safety issue.
Examples (Use with Caution and Verification)
Ideal Industries
Ideal Industries makes handle ties, but you need to verify compatibility with BR bolt-on breakers. Check their catalog and specifications carefully.
Other Electrical Supply Manufacturers
Search for handle ties from reputable electrical supply manufacturers (e.g., Square D, Siemens) and verify if they have a model that is UL listed and compatible with BR bolt-on breakers.
Ebay/Amazon
As before, look for a handle tie that is specifically rated for the exact breaker you have.
Consult a Qualified Electrician
Before using any aftermarket handle tie, consult with a qualified electrician who is familiar with the NEC and the requirements for handle ties.3.
Why a Non-Listed Handle Tie is a Bad Idea
Safety Risk
A non-listed handle tie may not provide reliable simultaneous tripping of the breakers. This could create a hazardous situation if there is a fault.
Code Violation
Using a non-listed handle tie is a violation of the NEC and could result in fines or rejection of the installation by an inspector.
Voided Warranty
Modifying breakers with non-approved accessories could void the manufacturer's warranty.
Liability
You could be held liable if someone is injured or property is damaged as a result of using a non-approved handle tie.4.
Alternative Solutions (If Handle Ties are Problematic)
Replace with a Single 4-Pole Breaker
The ideal solution is to replace the two 2-pole breakers with a single 4-pole breaker of the correct amperage rating. This is the safest and most code-compliant option. While you mentioned the cost is high, it might be worth re-evaluating to ensure safety and compliance.
Use a Separate Disconnect Switch
If you absolutely cannot use a 4-pole breaker, consider installing a separate, properly rated disconnect switch (a fused or non-fused disconnect) ahead of the breakers. This would serve as the main disconnecting means and satisfy the six disconnect rule.
Consult with the Authority Having Jurisdiction (AHJ)
Talk to the local electrical inspector or the AHJ (Authority Having Jurisdiction). They can provide guidance on how to meet the code requirements in your specific situation.
Important Considerations
Amperage Rating
Make sure that the handle tie is rated for the correct amperage of your breakers.
Voltage Rating
Verify that the handle tie is suitable for the voltage of your system.
UL Listing
Absolutely confirm that the handle tie is UL listed for use with your specific breakers.
Professional Installation
Have a qualified electrician install the handle tie to ensure that it is done correctly and safely.
In summary, your best course of action is to contact Eaton/Cutler-Hammer and ask about factory handle ties for two 2-pole BR bolt-on breakers. If that is not feasible, then carefully research and verify any aftermarket handle tie, ensuring that it is UL listed for your specific breakers. If in doubt, consult with a qualified electrician and the local electrical inspector. Flag for review