User: jeremy0618, Location: Orlando, FL
Asked on: Wednesday, October 2, 2024 at 12:27 pm EDT
Answered on: Thursday, March 6, 2025 at 3:17 am EST
Question: Have a submittal for Miami- Dade that I am working on. Helping out another team on this since I am more accustomed to FA.Issue I am having is that through plan review they are asking a ton of questions. The scope of work is for a business occupancy installing 2 card readers that open a door via electric strike. Connecting to an existing access system in place. The door in question leads to a secure space from a waiting room. A card reader on either side of the same door. Does this door require loss of power due to fire alarm? I am think yes but want to make sure I am not leading the customer down the wrong path.I may have follow up questions. Is there a really robust resource I a can use online to learn more about this topic. I seems to get confusing at time electric strikes and magnetic locks with life safety.Thank you
Okay, let's break down this Miami-Dade access control question in the context of a fire alarm system and life safety. You're on the right track by questioning the power loss upon fire alarm activation. Miami-Dade does have stricter interpretations of the codes, so scrutiny is expected.
The Short Answer
Generally,
yes, if the electric strike-equipped door is considered a required means of egress, it likely will require power loss upon fire alarm activation to allow free egress.
The Reasoning (Key Code Sections & Considerations)
Means of Egress
The primary concern is whether this door is part of the required means of egress. If it's the only way out of the "secure space" for occupants to reach a safe area (like the waiting room and then outside), it's definitely part of the means of egress. Even if it's not the only way out, if it's a commonly used path, Miami-Dade might still consider it part of the required means of egress.2.
NFPA 101 (Life Safety Code) - Section 7.2.
1.6 (Delayed Egress Locks)
This section (and related subsections) is CRUCIAL. It covers access control systems with delayed egress, and specifically addresses when power must be removed. Here's why it's important: Even though you're not installing a delayed egress lock, the presence of access control hardware on a door that could impede egress brings this section into play.
Exception 3 to 7.2.
1.6.1
This exception is often cited for access control on egress doors. It allows access control systems without delayed egress if specific conditions are met. A KEY condition is: "The door, when unlocked, remains unlocked..." upon fire alarm or power failure. This is the critical point! An electric strike locks the door when power is removed unless it is a "fail-safe" strike.
Important
Miami-Dade is likely going to focus on ensuring that during a fire alarm, the door unconditionally unlocks.3.
"Fail-Safe" vs. "Fail-Secure" Electric Strikes
Fail-Safe (Also called "Fail-Secure" in the European market and Asia)
These electric strikes require power to remain locked. When power is removed (fire alarm, power failure), the door unlocks. This is the type you likely need if it is a required egress door.
Fail-Secure
These electric strikes require power to unlock. When power is removed, the door remains locked. This is NOT what you want on an egress door unless specifically permitted and controlled by code.4.
Fire Alarm System Interface
The fire alarm system needs to have a dedicated output (typically a relay) that, when activated, cuts power to the electric strikes. This output needs to be supervised to show a trouble if the circuit between the fire alarm and the strike is broken.
Specific Considerations for Your Situation (Based on Your Description)
Waiting Room -> Secure Space
Because the secure space exits to the waiting room and the waiting room is not considered secure, you are most likely ok to power the strike from its own power supply. The fire alarm panel is required to have a dedicated output (typically a relay) that, when activated, cuts power to the electric strikes. This output needs to be supervised to show a trouble if the circuit between the fire alarm and the strike is broken.
Existing Access Control System
You mentioned it's connecting to an existing system. You must ensure that this existing system is compliant with life safety codes. The existing system must be capable of releasing the electric strikes upon fire alarm activation. Do not assume it is correct as existing. You may need to upgrade existing equipment.
Action Steps and Recommendations
Verify Egress Path
CONFIRM with the customer and, ideally, the local AHJ (Authority Having Jurisdiction - Miami-Dade Fire Department plan reviewer in this case) whether this door is considered part of the required means of egress. Get it in writing if possible. This is the linchpin of the decision.2.
Specify Fail-Safe Electric Strikes
If it's part of the egress path, specify fail-safe electric strikes. Make sure the product data sheets clearly state that they unlock upon power loss.3.
Fire Alarm Interface
Include a detail in your submittal showing how the fire alarm system will interface with the electric strikes' power supply to cut power on alarm. Label the fire alarm relay output on your drawings.4.
Voltage and Current
Ensure the fire alarm system relay can handle the voltage and current draw of the electric strikes.5.
Existing System Review
If connecting to an existing system, thoroughly review its functionality. Can it handle the fire alarm interface correctly? Is it already compliant?6.
Miami-Dade Amendments
CRITICALLY, check for any local Miami-Dade amendments to the NFPA codes (NFPA 101 and NFPA 72 are most relevant here). Miami-Dade often has stricter interpretations or additions. Your plan reviewer will be looking for these.
Robust Online Resources
NFPA Website (NFPA.org)
You can purchase electronic access to the NFPA 101 (Life Safety Code) and NFPA 72 (National Fire Alarm and Signaling Code). These are the definitive sources. Costly, but essential for fire alarm work.
ICC (International Code Council) Website (ICCsafe.org)
You can purchase the International Building Code (IBC). While NFPA 101 is often used, the IBC also addresses access control and egress.
Industry Associations (DHI - Door and Hardware Institute)
DHI offers training and resources on door hardware, including access control.
Manufacturer Websites (e.g., ASSA ABLOY, Allegion, dormakaba)
These companies have detailed product information, installation guides, and sometimes white papers on code compliance.
Code Consulting Services
If you're consistently facing complex code issues, consider engaging a fire protection engineer or code consultant who specializes in access control and egress.
Final Thoughts:*It's always best to over-engineer on the side of life safety. If there's any doubt, err on the side of providing free egress upon fire alarm activation. Documentation is key. Clear drawings, product data sheets, and a narrative explaining how the system meets code requirements will significantly improve your chances of approval. Miami-Dade plan reviewers are thorough, so a well-prepared submittal is crucial. Flag for review