Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Cord Connected Splice in Appliance

User: zzzzt, Location: California

Asked on: Wednesday, October 2, 2024 at 12:50 pm EDT
Answered on: Thursday, March 6, 2025 at 3:17 am EST

Question: I have a cord-connected range hood that is made for an island. I installed a receptacle in the attic for it but of course the cord is 10 inches too short.In looming for a fix I considered the best option would be a 2 foot long extension cord, but that’s not code. I considered replacing the cord with a longer one, but the manufacturer has sealed it. So, a splice?I asked my inspector. He says I should use a rack-a-tiers open splice box in the chase.Is this a good solution? Got a better one?Thanks!

Okay, let's break down the situation and evaluate the options for extending the cord on your island range hood.

Understanding the Problem and Code



Short Cord

The core issue is that the provided cord on your island range hood is too short to reach the receptacle in the attic.


Extension Cords are Generally a No-Go for Appliances

Extension cords for permanent appliance installations are almost always against code. They are considered a temporary solution and are not designed for continuous use or for being hidden within walls or ceilings.

Sealed Cord

The manufacturer sealing the cord adds a complication. Replacing the cord entirely is typically the preferred approach for this problem, but if it's sealed, that's difficult.


Splices

Electrical splices are permitted, but they need to be done correctly, inside an approved enclosure, and accessible for inspection.

Evaluating the Inspector's Suggestion: Rack-A-Tiers Open Splice Box


While I don't know exactly which product he recommends, Rack-A-Tiers make a range of useful electrical products for electricians. From your description (open splice box), and depending on the exact product it could meet code, but it raises some immediate questions: "Open" Splice Box

If the inspector means a splice box that's
open (i.e., not enclosed), that's definitely not a code-compliant solution. All electrical splices must be contained within an approved enclosure. I would suggest that you clarify with the inspector.

Accessibility

Splice boxes must be accessible. This generally means you can get to them without having to dismantle part of the building. (Think: removable cover, located in a reasonably accessible space).

My Assessment of the Rack-A-Tiers Suggestion



Assuming that the product is an approved, enclosed splice box, and not an open splice box, then it is an acceptable solution if installed to code
.

Here's a breakdown of why, and what to consider



Pros



Code Compliance

When done correctly, using a junction box with proper connectors/splices is code-compliant.


Safety

A well-executed splice in a proper enclosure is a safe way to extend the wiring.

Relatively Simple

It's generally a straightforward task for a qualified electrician.

Cons



Accessibility

You need to ensure the junction box is located where it can be accessed for future inspection or maintenance. The attic is often fine, but make sure it's not buried under insulation.

Professional Installation Recommended

While you
could do this yourself, it's highly recommended to have a licensed electrician perform the splice and install the junction box. Electrical work can be dangerous, and incorrect wiring can cause fires or other hazards.

Best Practices on Cable Length

I would suggest that you ensure that you have plenty of cable length inside the box. The code states "at least 6 inches of free conductor length, measured from the point in the box where it emerges from its raceway or cable sheath."

Better Alternatives or Additional Considerations


Double Check the Manufacturer's Instructions

Before you do anything, carefully review the range hood's installation manual. It might have specific instructions or warnings about extending the power cord.2.

Consider an Electrician's Perspective

Get a quote from a licensed electrician to install a proper junction box and make the splice. They can assess the situation in person and advise you on the best approach, considering your local codes and the specific layout of your kitchen.3.

Ask the Inspector For Further Suggestions

Ask the inspector to be more specific in their recommendation. What splice box are they referring to? Is this the only solution that they find acceptable?

In Summary:
Extension cords are generally not acceptable for permanent appliance installations like this. Replacing the cord is ideal, but difficult if sealed. Using a junction box to create a safe and code-compliant splice is a viable solution, especially if your inspector approves of that particular product. Make sure the "open" splice box is actually an enclosed splice box, and make sure it is accessible. Professional installation by a qualified electrician is strongly recommended to ensure safety and code compliance.Safety should be your top priority. When in doubt, consult with a licensed electrician. Good luck! Flag for review

Previous Question Next Question