User: fastline, Location: midwest usa
Asked on: Wednesday, October 2, 2024 at 6:25 pm EDT
Answered on: Thursday, March 6, 2025 at 3:19 am EST
Question: Thank you to the guys that got a chance to reply. I just wanted to clarify that because the building electrical system has been messed with so much by previous building owners, and thieves got in and started chopping out wire for scrap, we have to vet every inch of wire and prescribe corrective actions. I've found a laundry list of safety items. That panel is not even hot right now. I have recommended a full tear down and inspect. Square D seemed pretty confident they would be able to provide either a compatible breaker solution, or a retrofit.Very much appreciate all the input I get here! If that panel was hot and doing stuff right now, I could understand the "leave it" approach, but for reasons I need to uncover, there was an overhead conduit that was installed to bypass this panel, but is only powering a single air compressor circuit.
Okay, that context makes a HUGE difference! Knowing the panel is already cold, has been compromised by thieves, and bypassed with a questionable overhead conduit definitely justifies a more aggressive approach.Here's a revised perspective, acknowledging the new information: Full Tear-Down and Inspection is the Right Call
Given the history of tampering and theft, a complete teardown is absolutely the correct recommendation. You can't trust anything about that panel until you've verified it yourself.
Square D's Confidence is Encouraging
Their willingness to work with you on a breaker solution or retrofit is positive. Lean heavily on their expertise and technical support. They'll need to see pictures, nameplate information, and potentially even visit the site.
Document Everything
Diligently document every issue you find: loose connections, damaged insulation, missing components, improper wiring, etc. Pictures are essential. This documentation will support your recommendations and justify the cost of repairs or replacement.
The Overhead Conduit Raises Red Flags
The fact that someone went to the trouble of installing an overhead conduit to bypass the panel and power only one air compressor is very suspicious. It could indicate serious underlying issues within the panel itself, like overloaded circuits, a ground fault problem, or something else entirely. Investigate where that overhead conduit originates and terminates very carefully.
Consider a Replacement vs. Retrofit
While retrofitting might seem like a cost-saving measure, weigh the long-term benefits of replacing the panel entirely. A new panel will provide peace of mind and future-proof the electrical system. Factor in the cost of labor, materials, and downtime for both options.
Engage a Qualified Electrical Contractor
This project definitely requires a licensed and experienced electrical contractor who can handle complex troubleshooting, panel upgrades, and ensure all work is done to code. They will need to perform all the work!
Safety First
Remind everyone involved about the dangers of working with electrical systems. Follow all safety protocols and lockout/tagout procedures.
Key Questions to Answer During the Tear-Down and Inspection
Panel Rating and Capacity
Verify the panel's voltage, amperage, and interrupting rating. Is it sufficient for the building's current and future needs?
Bus Bar Condition
Inspect the bus bars for corrosion, discoloration, or damage.
Wire Gauge and Insulation
Check the wire gauge and insulation of all conductors. Are they properly sized for the circuit load? Is the insulation intact?
Grounding System
Verify the integrity of the grounding system. Is it properly bonded?
Conduit and Raceway Condition
Inspect the conduit and raceways for damage or corrosion.
Breaker Compatibility
Ensure that all breakers are the correct type and rating for the panel.
Regarding the Overhead Conduit - Some Things to Consider Was there another panel that the overhead conduit was supposed to power and was it removed? This could provide some history on why it was done that way.* Was this work permitted? Check with local building codes if it was.
In summary: Your initial assessment was spot-on. The history of tampering, theft, and questionable modifications warrants a complete tear-down and thorough inspection of the electrical panel. Work closely with Square D and a qualified electrical contractor to determine the best course of action: repair, retrofit, or replace the panel entirely. Don't overlook the significance of the overhead conduit bypass – it likely holds clues to deeper electrical problems. Prioritize safety above all else! Flag for review