Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Fire and NEC code issue question again

User: brother, Location: "I have learned, in whatsoever STATE I am, therewi

Asked on: Thursday, October 3, 2024 at 4:52 am EDT
Answered on: Thursday, March 6, 2025 at 3:20 am EST

Question: They are asking for a receptacle again to be installed above the rack that is installed above the fire extinguish. It was brought up again that this might be a fire code issue because in the past the fire inspectors did not like shelves, etc.. mounted above that close the fire extinguisher. See my drawing, would your area allow this to be? and also they usually require some type of signage showing where it is, and that is not there. I dont see an NEC code violation, if there is one let me know.I would not recommend installing the receptacle there, the in cabinet fire extinguisher was there first, and its just easier to move the shelf and install the receptacle some where else for the chargers. Shelf is about 6 inches above.

You're right to be cautious and consider all angles. Here's a breakdown of the potential issues and considerations

Fire Code Concerns:
Obstruction of Fire Extinguisher Access

The primary concern is blocking or hindering access to the fire extinguisher. Fire codes require extinguishers to be readily accessible and visible. Shelves, cabinets, and other obstructions are often prohibited within a certain distance of the extinguisher.


Visibility

The lack of signage identifying the fire extinguisher is definitely a violation of most fire codes. Extinguishers need to be clearly marked so people can locate them quickly in an emergency.

Local Fire Codes Reign Supreme

Fire codes are typically adopted and enforced at the local level (city, county, or even fire district). What's permitted in one area might be prohibited in another. The past rejections from fire inspectors in your area is a strong indication that there is a local requirement.

NEC (National Electrical Code) Considerations



No Direct Violation, Potentially Indirect

You're correct; there's likely no direct NEC violation for simply installing a receptacle above a fire extinguisher. However, there could be an indirect violation if the installation creates a safety hazard or violates the manufacturer's instructions for the electrical equipment. For example:

Working Clearance

Is there adequate working clearance around the receptacle for electricians to safely install, maintain, or repair it? If the shelf significantly restricts access, it could be argued that the installation violates NEC 110.26.


Dedicated Equipment Space

If the receptacle is serving a specific piece of equipment (e.g., charging station) and that equipment requires dedicated space, the shelf could interfere with that dedicated space requirement.

Why It's a Bad Idea (Even if Technically Legal)



Conflict with Emergency Equipment

It sets a bad precedent to place non-essential equipment (a receptacle) in a location that could potentially interfere with life safety equipment (the fire extinguisher).


Future Issues

Even if it passes inspection now, a future fire inspector or a stricter interpretation of the local code could lead to problems later.

Poor Planning

It suggests a lack of planning and foresight to prioritize a receptacle location over the accessibility of critical safety equipment.

Recommendations


Consult Local Fire Authority



This is the most important step.
Contact the local fire marshal or the fire department's inspection division and specifically ask about the rules regarding obstructions near fire extinguishers. Get it in writing if possible. Explain the situation and show them your drawing. Their answer is the one that matters.2. Research Local Fire Codes

If possible, review the local fire codes yourself. Look for sections that address fire extinguisher placement, obstructions, and signage.3.

Advocate for Relocation

Strongly recommend relocating the receptacle to a different location. Emphasize the potential fire code issues and the overall better practice of keeping access to fire extinguishers clear.4.

Signage (Regardless)

Even if the receptacle is installed, insist on proper signage for the fire extinguisher. This includes:
A clearly visible sign indicating the location of the fire extinguisher. The sign should be positioned so that it's not easily obscured by the shelf or any equipment plugged into the receptacle.

Documentation

Keep detailed records of all communication with the local fire authority, including names, dates, and the substance of the conversations.* Document the existing conditions (photos of the fire extinguisher, the shelf, and the proposed receptacle location).

In summary, while you might not find a direct NEC violation, the potential for fire code violations and the overall poor design make this a bad idea. Prioritize safety and compliance with local fire codes by advocating for an alternative receptacle location and ensuring proper fire extinguisher signage.
Flag for review

Previous Question Next Question