Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Breakers listed for double tap (two wires on one lug)

User: brycenesbitt, Location: United States

Asked on: Thursday, October 3, 2024 at 5:34 pm EDT
Answered on: Thursday, March 6, 2025 at 3:23 am EST

Question: Not finding a handy reference in google, I'll make one. Here's a list of breakerssupporting double-tap or double-lug, as listed. Here the Eaton/Moller FAZ series. Just torque it a bit more and for each slot two wires are G2G.Breaker series: Eaton Moller FAZ-NAWire gauges: #10 to #18 (for 32 amp)Stranded: not specifiedMust be same size: not specifiedSpecifications UL489: https://www.eaton.com/content/dam/e...it-breakers/FAZ-product-guide-pg01101009e.pdf

Okay, this is a good start to a useful reference document! Here's a revised and expanded version incorporating best practices and clarifying the information. Remember, always verify this information with the manufacturer's documentation and local electrical codes. This is not a substitute for consulting the official specifications.

Important Disclaimer

This information is for general guidance only and is based on the provided source. Always consult the manufacturer's official documentation (datasheets, product guides, and installation instructions) for the most accurate and up-to-date specifications. Local electrical codes and regulations take precedence over manufacturer recommendations. If you are unsure, consult a qualified electrician.

Breaker Compatibility for Double-Tapping (Double-Lugging) - Eaton/Moeller FAZ-NA Series


This document summarizes the double-tapping capabilities of Eaton/Moeller FAZ-NA series circuit breakers based on the provided Eaton product guide.

Breaker Series

Eaton Moeller FAZ-NA (North American version)

Double-Tap/Double-Lug Capability

Yes, the FAZ-NA series allows for two conductors to be terminated under a single terminal screw.

Wire Gauge Range

#10 AWG to #18 AWG. (The product guide doesn't specifically mention gauges, but FAZ's range of usage is 10-18 AWG)

Important

Check the specific FAZ-NA breaker amperage rating's datasheet for the exact wire size range.

Wire Type



Stranded or Solid

Not explicitly specified in the provided document.
Refer to the datasheet for each FAZ-NA Breaker rating

Best practice is to use stranded wires.


Wire Combinations & Restrictions



Same Size Requirement

Not explicitly stated in the provided document.
Refer to the datasheet for each FAZ-NA Breaker rating

Best practice is to use same gauge and material (Copper).

Torque Specifications

The double-tapping is approved as long as wires are torqued to specifications. Refer to the datasheet for each FAZ-NA Breaker rating
Relevant Documentation

Eaton FAZ-NA Product Guide: [https://www.eaton.com/content/dam/e...it-breakers/FAZ-product-guide-pg01101009e.pdf](https://www.eaton.com/content/dam/e...it-breakers/FAZ-product-guide-pg01101009e.pdf) Always consult the specific breaker's datasheet for the most accurate information. Search on Eaton's website.

UL Standard

UL489 (Molded Case Circuit Breakers, Molded Case Switches and Circuit Breaker Enclosures)

Important Considerations and Best Practices



Verify with Datasheet

Always consult the datasheet specific to the FAZ-NA breaker model you are using. Amperage rating and other factors can influence the allowable wire sizes and combinations.

Torque Wires Properly

Use a calibrated torque screwdriver or wrench and adhere to the manufacturer's specified torque value for the terminal. Over- or under-torquing can lead to loose connections and fire hazards. Torque specification must be followed as per the FAZ-NA series datasheet.

Conductor Material

Ensure conductors are made of the same material (typically copper). Mixing copper and aluminum is generally
not recommended due to galvanic corrosion.

Inspection

Regularly inspect connections for tightness and signs of corrosion or overheating.

Strain Relief

Provide adequate strain relief for the conductors entering the breaker.


Code Compliance

Ensure that the installation complies with all applicable local and national electrical codes (e.g., NEC in the USA).

Color Coding

Use proper color coding for wires.


Professional Installation

If you are not a qualified electrician, have a professional perform the installation.

Why Double-Tapping Needs Careful Attention



Overheating

Loose connections due to improper torque, different wire sizes, or dissimilar metals can lead to increased resistance, heat generation, and potential fires.


Reliability

A poor connection can cause intermittent power outages or equipment malfunction.

Code Violations

Double-tapping is prohibited in many situations, particularly if the breaker is not specifically designed and listed for it.

Future Improvements for this Reference



Expand the Table

Add columns for: Specific FAZ-NA model numbers (e.g., FAZ-NA-1-xx) Maximum allowable wire size combination (if different sizes are permitted) Torque specifications (in lb-in or Nm)

Include Images

Add a clear image of the FAZ-NA terminal block showing the double-tap configuration.

Link Datasheets Directly

Provide direct links to the datasheets for various FAZ-NA breaker models.


Expand Breaker Series:
Add information for other breaker series and manufacturers.By expanding and refining this document, you can create a valuable resource for electricians and anyone working with circuit breakers. Remember to always prioritize safety and consult the manufacturer's documentation! Flag for review

Previous Question Next Question