Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Threading

User: Alwayslearningelec, Location: NJ

Asked on: Friday, October 4, 2024 at 1:56 pm EDT
Answered on: Thursday, March 6, 2025 at 3:26 am EST

Question: Is there a way to get around threaded RGS conduit when having to enter and enclosure where you would need locknuts? A threadless connector?

Yes, there are several ways to get around threaded RGS (Rigid Galvanized Steel) conduit when entering an enclosure and needing a secure connection without using traditional locknuts directly on the threads. Here's a breakdown of common solutions and considerations

1. Threadless Connectors (Also Known as Compression Fittings):
How They Work

These connectors clamp onto the unthreaded end of the RGS conduit using a compression ring or similar mechanism. When tightened, they create a tight, weatherproof, and electrically conductive connection.


Advantages



Eliminates Threading

No need to thread the conduit or rely on threads in the enclosure.


Easy Installation

Typically faster to install than threading and using locknuts.

Adjustability

Can be loosened and adjusted if needed.


Suitable for Various Environments

Available in types suitable for wet locations (raintight) and hazardous locations.

Disadvantages



Can be More Expensive

Usually more expensive than standard threaded fittings.

Requires Correct Sizing

Must be the correct size for the conduit being used.


Potential for Damage

If overtightened, the conduit or connector can be damaged.

Types

Common types include set-screw compression connectors, compression ring connectors, and gasketed compression connectors.

2. Combination Couplings and Connectors



How They Work

These fittings typically have a threaded section on one end (to connect to a threaded hub on the enclosure, if available) and a threadless (compression) section on the other end to connect to the RGS conduit.

Advantages



Versatility

Allows you to connect threaded and unthreaded conduit runs.

Strong Connection

Provides a secure and often weatherproof connection.


Disadvantages



May Not Always Fit the Situation

Requires a threaded hub or appropriate hole on the enclosure.


Added Cost

Can be more expensive than simple threadless connectors.

3. Enclosure with Knockouts for Threadless Connectors



Consider This When Specifying or Purchasing Enclosures

Many enclosures are manufactured with pre-punched knockouts specifically designed for threadless RGS connectors. These knockouts are typically a slightly larger diameter than those intended for threaded connections.


Advantages



Simplified Installation

Designed for easy and proper threadless connector installation.


Secure Fit

Ensures the connector fits snugly and securely in the enclosure.

4. Hubs (If Your Enclosure Doesn't Have Them)



What They Are

Hubs are threaded fittings that can be mounted on an enclosure (if the enclosure material allows and is suitable for tapping/drilling) to provide a threaded entry point for conduit.


How They Help

You can attach the hub to the enclosure, then connect the RGS conduit to the hub using standard threaded couplings.

Advantages



Adds a Threaded Entry

Allows for a threaded connection where one wasn't previously available.

Disadvantages



Requires Drilling and Tapping

May require drilling and tapping the enclosure (check enclosure manufacturer's specifications to see if its rated and suitable for this), which can be time-consuming and needs to be done carefully.

Enclosure Integrity

Improper drilling and tapping can compromise the enclosure's NEMA rating (weatherproofness, etc.).

Important Considerations for All Methods



Code Compliance (NEC/Local Codes)

Always verify that the connector and installation method meet the requirements of the National Electrical Code (NEC) and any local electrical codes in your area. Specifically, ensure that the fitting is listed and labeled for the intended use.

Grounding

Ensure proper grounding is maintained throughout the conduit system. Use grounding bushings or other appropriate grounding devices to ensure a reliable electrical connection between the conduit and the enclosure.


Environmental Conditions

Choose connectors and fittings that are suitable for the environmental conditions where they will be used (e.g., wet locations, corrosive environments, hazardous locations).*

Proper Installation

Follow the manufacturer's instructions for installing the connectors and fittings to ensure a secure and reliable connection. Torque wrenches are often recommended for compression fittings.

In Summary:


Threadless connectors are often the best solution for avoiding threaded connections directly to an enclosure. However, consider the cost, availability of pre-punched enclosures, and the need for maintaining proper grounding and code compliance when making your decision. Always consult the NEC and local codes and follow the manufacturer's instructions for the products you use. Flag for review

Previous Question Next Question