Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: No ufer, only ground rods

User: Brownetown, Location: Va

Asked on: Friday, October 4, 2024 at 11:06 pm EDT
Answered on: Thursday, March 6, 2025 at 3:27 am EST

Question: home owner ripped out Ufer competently digging his trench for his well. I also already had 2 ground rods along with the Ufer. Passed inspection waiting of poco to do there end. My question is with the ufer beging gone will my 2 ground rods be sufficient?

Okay, this is a tricky situation and requires careful consideration. Here's a breakdown of the factors and what you should do

The Importance of a Ufer Ground (Concrete-Encased Electrode):
Lower Impedance

A Ufer ground, properly installed, typically provides a much lower impedance path to ground than ground rods alone. This is because of the large surface area in contact with the earth and the conductive properties of concrete.


Better Fault Current Handling

The lower impedance means a Ufer ground can handle larger fault currents more effectively, helping your circuit breakers trip faster and potentially reducing the risk of electrical shock or fire.

Code Preference

The National Electrical Code (NEC)
prefers a concrete-encased electrode (Ufer) as the grounding electrode.

Ground Rods Alone



Higher Impedance

Ground rods generally have a higher impedance to ground compared to a Ufer. The effectiveness of ground rods depends heavily on soil conductivity (moisture content, mineral composition, etc.).

Code Minimum

The NEC generally requires at least
two ground rods spaced at least 6 feet apart if you rely solely on ground rods.

What Happens Now That the Ufer is Gone?
1. Code Compliance is Key

You
must meet current electrical code. You need to determine if your existing two ground rods meet the current code requirements without the Ufer.2.

Inspection Concerns

Because your initial inspection passed
with the Ufer, the inspector may have relied on its presence to consider your grounding system adequate. The fact that it has been removed could cause an inspection failure.3.

Possible Solutions (in order of preference and code compliance)



Best Option: Re-Establish a Ufer (if possible)

This is the best option from both a safety and code compliance standpoint. If at all possible, you should consider reinstalling a Ufer ground. This could involve:

Consulting an electrician

A licensed electrician can advise on the best way to re-establish a Ufer, even
after the concrete is poured. There are methods to connect to the rebar even after the pour, though they might be more complex and costly.

Documentation

Properly document the installation with photos and details for future reference and possible re-inspection.

Second-Best Option: Add More Ground Rods (if necessary)

If re-establishing a Ufer is not feasible, you might be able to bring your grounding system up to code by adding more ground rods. You need to:


Consult an Electrician

A licensed electrician can test the resistance to ground of your existing ground rods and determine if adding more rods will bring the system into compliance. A ground resistance test meter is needed to determine the effectiveness of the ground rods.4.

Contact the Electrical Inspector

Before you do anything, contact the electrical inspector who approved your initial inspection. Explain the situation (the Ufer was inadvertently destroyed). Ask them: Will the removal of the Ufer cause a failed inspection? What steps do they recommend to bring the system back into compliance? Will they require a re-inspection?5.

Documentation

Keep meticulous records of everything you do. This includes:
Photos of the original Ufer installation (if you have them). Photos of the destroyed Ufer. Documentation of any ground resistance tests. Receipts for any materials purchased. Details of any consultations with electricians or inspectors.

Important Considerations



Safety First

Don't take shortcuts when it comes to electrical safety. A properly grounded system is crucial for protecting your home and family.


Local Codes

Electrical codes can vary slightly from region to region. Always follow the requirements of your local jurisdiction.

Professional Help

If you're not comfortable working with electricity, hire a qualified and licensed electrician to do the work.

In summary, the removal of the Ufer is a significant issue. Contacting the inspector
before* taking any action and consulting with a licensed electrician are the most important steps to ensure your grounding system is safe and code-compliant.
Flag for review

Previous Question Next Question