Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: 80 amp residential E.V.

User: nizak, Location: Kent, WA

Asked on: Saturday, October 5, 2024 at 3:29 pm EDT
Answered on: Thursday, March 6, 2025 at 3:27 am EST

Question: Customer has an 80 amp (100A breaker) charger he would like installed.Anybody been putting units in that big at a residence?

Yes, absolutely. 80-amp chargers (especially when paired with a 100A breaker) are becoming increasingly common in residential settings as electric vehicle (EV) technology advances and owners want faster charging times.Here's a breakdown of what to consider and what others are experiencing

Key Considerations:
NEC Compliance (National Electrical Code)

This is paramount. You
must adhere to the NEC for safe and legal installation. Specific sections to pay close attention to include:

Article 625 (Electric Vehicle Charging Systems)

This is the go-to article for EV charger installations.

Article 220 (Load Calculations)

This is critical. You need to perform a load calculation for the entire house to determine if the existing electrical service can handle the additional 80A load of the charger. You can't simply assume there's capacity. The NEC generally requires you to add the EV charger load at 100% of its continuous rating (80A in this case).


Article 250 (Grounding and Bonding)

Proper grounding is essential for safety.

Article 310 (Conductors for General Wiring)

Ensuring the correct conductor size and ampacity for the 80A load. You'll need to account for temperature correction and derating factors if the wiring is exposed to high temperatures or if multiple conductors are bundled together.


Load Calculation and Service Capacity

This is the biggest potential hurdle.

Existing Service Panel

What is the ampacity of the main service panel (e.g., 100A, 200A)? A 100A panel might struggle, while a 200A panel is more likely to accommodate the charger.


Existing Load

How much power does the house currently consume? Consider air conditioning, electric heating, electric water heaters, stoves, and other large appliances.

Demand Factors

The NEC allows for demand factors in some cases, meaning you don't necessarily have to add up the nameplate ratings of
all appliances. However, you still need to do a thorough calculation.

Potential Upgrade

If the existing service is insufficient, the customer will need to upgrade the service panel and possibly the utility connection. This can be a significant expense.

Wiring



Wire Size

You will likely need very large gauge wiring (e.g., 4 AWG or even larger, depending on distance, temperature rating, and other factors). Consult the NEC ampacity tables. Copper is generally preferred for its lower resistance and better heat dissipation.

Conduit

Running the wiring in conduit (e.g., PVC or metal) is generally recommended for protection and future access.


Distance

Longer runs require larger wire sizes to minimize voltage drop.

Charger Specifications



Voltage

Ensure the charger is compatible with the electrical system (usually 240V in residential settings in North America).

Hardwired vs. Plug-in

80A chargers are almost always hardwired. A plug-in configuration would be very rare and require a very robust (and expensive) receptacle.


UL Listing

The charger must be UL listed (or equivalent) for safety.

Permitting and Inspections



Local Codes

Check with the local building department for permitting requirements and any specific local codes related to EV charger installations.

Inspection

A qualified electrical inspector will need to inspect the installation to ensure it meets code.


Cost

Be upfront with the customer about the potential costs, including: Charger unit Wiring and conduit Installation labor Permitting fees Potential service panel upgrade

Load Management/Sharing



Consider a Load Management System (LMS)

If the service panel is borderline, an LMS can dynamically reduce the charger's current draw when other high-demand appliances are in use. This can avoid overloading the service.


Smart Chargers

Some chargers have built-in load management capabilities or can be integrated with smart home systems.

Experiences and Best Practices



Common Scenario

Installing an 80A charger on a 200A service panel is a common scenario, but it still
requires a proper load calculation.

Panel Upgrades

Many older homes only have 100A service, making a service panel upgrade necessary.

Customer Expectations

Manage customer expectations regarding cost and potential for upgrades. Explain the importance of safety and code compliance.


Qualified Electrician

This is not a DIY project. It requires a licensed and experienced electrician who is familiar with EV charger installations and the NEC.

Communication with Utility

In some areas, the utility company may have specific requirements or incentives for EV charger installations. It's a good idea to communicate with them, especially if a service upgrade is needed.


Future-Proofing

If the customer is considering future EV purchases, it might be wise to install a larger service panel than currently needed to accommodate potential future charging needs.

Documentation

Keep meticulous records of all calculations, permits, inspections, and materials used for the install.

Example Scenario

Let's say a house has a 200A service panel. After performing a load calculation, it's determined that the existing load is 120A. Adding the 80A charger (at 100% of its continuous rating) brings the total load to 200A. In this case, the service panel
might* be sufficient, but it's cutting it close. An electrician might recommend a load management system or a slight derating of the charger's output to provide a safety margin.

In Summary:


Installing an 80A charger is definitely possible, but it requires careful planning, a thorough load calculation, and adherence to the NEC and local codes. Don't take shortcuts. Involve a qualified electrician. Communicate clearly with the customer about potential costs and requirements. Flag for review

Previous Question Next Question