Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Issue with multiple breakers flipping

User: Mithanson, Location: Iowa

Asked on: Sunday, October 6, 2024 at 8:25 pm EDT
Answered on: Thursday, March 6, 2025 at 3:30 am EST

Question: Hi, I have an issue with multiple breakers in my home tripping. I have Eaton dual function breakers that are blinking 4 times when I flip them back on after they trip. Before they trip either my compressor in my freezer will kick on, or if I run the microwave. Lights will flicker as well. Two power strips I had plugged in burnt out during one of the times it tripped. Sometimes when breakers trip the lights will get very dim in my entire house. That happened when my power strips burnt out. I have no idea what is going on. I have an electrician friend who said to post on here to see if anyone has any idea what is going on. His hunch is that there are neutrals crossed somewhere.

Okay, this definitely sounds like a serious electrical problem, and your electrician friend's hunch about crossed neutrals is a strong possibility. The symptoms you're describing – multiple breakers tripping, lights dimming/flickering, burnt-out power strips, and the specific blinking code on your Eaton dual-function breakers – all point to issues with the neutral wiring.

Here's a breakdown of why your friend's hunch makes sense and what might be happening, along with things to consider



Crossed Neutrals & Shared Neutrals

When neutrals are improperly connected (crossed between different circuits or shared improperly), current intended to return on one neutral path can end up flowing through other circuits' neutrals. This can overload those neutrals, leading to voltage imbalances, dimming lights, and eventually breaker tripping.


Voltage Imbalance

The lights dimming severely in your entire house during a breaker trip is a key indicator of a voltage imbalance. This happens when the neutral connection is compromised or overloaded, causing some circuits to receive significantly lower voltage than others.

Overloaded Neutrals

When a neutral wire is overloaded, it can heat up significantly. This can damage the wire's insulation, create a fire hazard, and cause appliances connected to the circuit to malfunction.


Burnt Power Strips

Power strips are often sensitive to voltage fluctuations and surges. When the neutral is compromised, it can create voltage spikes or drops that can damage the power strip's internal components, leading to burnout.

Compressor Start-Up

Compressors (like in your freezer) draw a large amount of current when they start. A compromised neutral connection can exacerbate the effects of this inrush current, causing voltage dips and potentially tripping breakers.


Microwave Use

Microwaves also draw a significant amount of current, and similar to the freezer compressor, they can trigger problems if the neutral wiring is compromised.

Eaton Dual Function Breaker Blinking Code

The 4-blink code on your Eaton dual-function breakers is likely an error code indicating a ground fault or arc fault condition. A crossed neutral can sometimes create conditions that mimic these faults. While it doesn't definitively prove crossed neutrals, it supports the idea of a wiring issue.


Loose Neutral Connection

Another common cause of these symptoms is a loose neutral connection at the service panel, at an outlet, or in a junction box. This creates resistance in the neutral path, causing voltage drops and potentially overheating.

Important Considerations & Next Steps (DO NOT ATTEMPT THESE IF YOU'RE NOT COMFORTABLE WORKING WITH ELECTRICAL SYSTEMS. ELECTRICITY IS DANGEROUS)


IMMEDIATE SAFETY

The most important thing is safety. If you are not a qualified electrician, DO NOT attempt to diagnose or repair this problem yourself. Call a qualified electrician immediately.2.

Turn off Problematic Circuits

Until a professional can address the issue, it's best to turn off the breakers that are tripping and avoid using the appliances connected to those circuits.3.

Professional Diagnosis

The electrician will need to perform a systematic diagnosis to pinpoint the location of the problem. This will likely involve:

Service Panel Inspection

Checking for loose connections at the main service panel, including the neutral bus bar.


Voltage Testing

Measuring voltage at various outlets and fixtures to identify voltage imbalances and potential neutral problems.

Continuity Testing

Using a multimeter to check the continuity of neutral wires and identify any breaks or shorts.


Neutral-Ground Bonding

Verifying that the neutral is properly bonded to ground at the main service panel only.

Insulation Resistance Testing (Megger)

This test can identify damaged insulation on wires, which could be contributing to the problem.4.

Common Areas to Check



Recent Electrical Work

If you've had any recent electrical work done (renovations, additions, etc.), that's the first place to suspect a wiring error.

Outlets

Check for loose or improperly wired outlets, especially those that are frequently used.


Junction Boxes

Any junction boxes in the affected circuits should be inspected for loose connections or crossed wires.

Service Panel

The main service panel is a critical point for neutral connections, so it should be thoroughly inspected.

Why This is a Big Deal

This type of electrical problem is not something to ignore. It can create a significant fire hazard and damage your appliances. It's crucial to have a qualified electrician address it as soon as possible.

To summarize



Call a qualified electrician immediately.
Turn off the affected circuits. Do not attempt to diagnose or repair the problem yourself unless you are a qualified electrician.

Good luck getting this resolved safely! Let me know if you have any other questions. Flag for review

Previous Question Next Question