Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Efficiency with redundant single/three line diagrams

User: SteveO NE, Location: Northeast

Asked on: Tuesday, October 8, 2024 at 10:43 am EDT
Answered on: Thursday, March 6, 2025 at 3:35 am EST

Question: As an engineer out on my own that never worked for a large firm, I sometimes find I've been missing some slick ways to make things be a bit more efficient.Most of the work I do doesn't require separate redundant single line diagrams and three line diagrams - its either controls points or single line diagrams. However, a handful of financiers of some renewable projects want 3-lines and SLDs of the entire system which is redundant and adds no value in my viewpoint - its a balanced system and we already call out connection details where relevant, like say the SBJ, transformer connection diagrams, disconnect connection diagrams, so we are left with updating the 400 tweaks everyone inevitably wants to an otherwise simple drawing but now need to make sure we update the SLD and 3-phase diagram exactly the same each time. For some projects it is of course valuable but I mean we are talking about a couple of fused disconnects and an inverter, and everything is the same on all phases.Is this normally done a different way to be able to just work from a single design and be able to maintain a SLD/3LD from a single design? Some viewport trickery with layers? Maybe it is what it is, and I just need to charge more, when someone wants this, but sometimes you don't know what you are missing until you are enlightened by someone who know which tool to use to do it. I am working in AutoCAD and/or BricsCAD so recommendations for either would work for me.Thanks!

Okay, I understand your frustration. Maintaining redundant single-line and three-line diagrams for simple, balanced systems is a common annoyance. It's definitely a holdover from a time when drafting was more manual and CAD tools were less sophisticated. There are definitely strategies to streamline this using AutoCAD or BricsCAD. Here are a few approaches, ranging from simple to more involved

1. The Layering/Viewport Trick (Simple, but Limited)

This is the easiest to implement immediately, but might not scale well for very complex projects. Create a Master Diagram

Design a master diagram that contains all the information for both the single-line and three-line views. This will likely look most like your three-line diagram, but think about how to represent the single-line information within it.


Layer Organization is Key

Put elements unique to the single-line diagram on a dedicated layer (e.g., "SLD_Elements"). Put elements unique to the three-line diagram on a separate layer (e.g., "3LD_Elements"). Put the elements common to both on another layer (e.g., "Common_Elements").

Create Viewports

In your paper space, create two viewports.


Layer Visibility Control



Viewport 1 (Single-Line Diagram)

Freeze or turn off the "3LD_Elements" layer. Make sure "SLD_Elements" and "Common_Elements" are on. Adjust line weights and styles in this viewport as needed to represent the SLD appropriately.


Viewport 2 (Three-Line Diagram)

Freeze or turn off the "SLD_Elements" layer. Make sure "3LD_Elements" and "Common_Elements" are on.

Annotation Scaling

Ensure your text and dimensions scale correctly in both viewports. You might need to create separate annotation layers with different scales if your annotation needs differ significantly between the SLD and 3LD views.

Advantages

Easy to set up. No special software or scripting required. Uses familiar AutoCAD/BricsCAD tools.

Disadvantages

Can get messy with a large number of layers and complex diagrams. Error-prone. It's easy to accidentally change the wrong layer in the wrong viewport. Limited in how much you can customize the appearance of the diagrams independently. You're essentially masking parts of the same drawing. Manual coordination is still needed. If you move an object, you have to remember to update the layers correctly.

2. Block Attributes and Visibility States (More Robust, Requires Planning)


This method uses the power of block attributes and visibility states to represent different diagram elements within a single block. This is a better approach for things that tend to repeat like disconnects, inverters, etc. Define Intelligent Blocks

For each component (e.g., fused disconnect, inverter, transformer), create a block.


Attributes

Include relevant attributes in the block: Name/Tag Voltage Current Rating Whatever information is relevant to both the SLD and 3LD.

Visibility States

The key here. Within the block editor, create
visibility states within the block. Name them "Single-Line" and "Three-Line".

In the "Single-Line" visibility state

Draw the component as it should appear in the SLD. Hide or delete the 3LD representation.

In the "Three-Line" visibility state

Draw the component as it should appear in the 3LD. Hide or delete the SLD representation.


Layering within Blocks

Consider using layers within the block to further organize elements. For example, a layer for "SLD_Symbol" and another for "3LD_Symbol" within the block.

Leverage Attribute Synchronization

Make sure attribute information updates automatically between the SLD and 3LD views. You might need to use the `ATTSYNC` command or a similar tool to keep attributes consistent.

Advantages

More organized than simple layering. Components are represented as single objects, reducing the risk of errors. Visibility states make it clear which representation is active. Attributes provide a central location for component information. Easier to maintain consistency.

Disadvantages

Requires more planning and setup time. Can be complex to create and manage a large library of intelligent blocks. Still requires careful design and standardization of blocks.

3. Dynamic Blocks with Lookup Tables (Advanced, for Complex Scenarios)


This builds on the block attribute approach and introduces lookup tables for more advanced configuration. Imagine you have different wiring configurations for a disconnect, and you want to easily switch between them.
Create a Dynamic Block

Start with the intelligent block approach from #2.

Lookup Table

Create a lookup table within the block editor. This table will define different block properties (e.g., visibility state, attribute values, even symbol geometry) based on a selected lookup value.


Example

Column 1: Configuration Type (e.g., "Standard", "Alternative1", "Alternative2") Column 2: Visibility State ("Single-Line" or "Three-Line") Column 3: Attribute Value (e.g., fuse size) Column 4: Block Rotation Angle (if needed)

Assign Actions

In the block editor, use
Actions (found in the block authoring palettes) to link the lookup table to the block's properties. You'll typically use a Lookup action.

User Interface

When you insert the dynamic block, users will be able to select a configuration from a dropdown list (based on the lookup table). The block's appearance, attributes, and visibility will automatically update based on the selected configuration.

Advantages

Highly flexible and customizable. Enables you to easily switch between different configurations of a component. Reduces the risk of errors by automating configuration changes. Can be used to represent very complex components with multiple parameters.

Disadvantages

Very complex to set up. Requires a deep understanding of dynamic blocks and lookup tables. Can be difficult to maintain and troubleshoot. Overkill for simple scenarios.

4. Database-Driven Solutions (Most Powerful, Requires Significant Investment)


This involves integrating your CAD system with a database to store and manage component data. This is a step above "normal" CAD work and heads into the realm of BIM.
Database

Use a database (e.g., SQL Server, Access) to store all the data about your components: Name Description Manufacturer Voltage Rating Current Rating Diagram Symbols (SLD and 3LD) – potentially stored as CAD blocks or even as vector graphics data. Wiring Diagrams Datasheet Links

CAD Integration

Develop a custom application (using AutoCAD's API or BricsCAD's BRX API) to connect to the database.


Data-Driven Drawing

Use the application to: Insert components from the database into your drawing. Automatically populate attributes with data from the database. Generate SLDs and 3LDs based on database information. Synchronize data between the drawing and the database.

Change Management

Implement change management procedures to ensure that data is updated consistently in the database and in the drawings.

Advantages

Centralized data management. Automatic diagram generation and updating. Improved data accuracy and consistency. Better change management. Enables collaboration and data sharing across multiple projects.

Disadvantages

Requires a significant investment in software development and database infrastructure. Complex to implement and maintain. Requires specialized skills.

Which Approach is Right for You?
Simple, Repetitive Systems (Like you described)

Start with

Approach 1 (Layering/Viewport Trick)
and Approach 2 (Block Attributes/Visibility States). Approach 2 is the best bet as you get better at it for the simple stuff, that can take all of 30 seconds to edit a block to be 3-line to SLD compatible, or vice versa. More Complex Systems with Repeating Elements

Move to

Approach 3 (Dynamic Blocks with Lookup Tables)
.
Large, Complex Projects Requiring Centralized Data Management

Consider

Approach 4 (Database-Driven Solutions)
, but only if you're prepared for the investment. This is more common for large firms with dedicated BIM teams.

Key Recommendations & Tips



Standardization

The key to all of these methods is
standardization. Define clear standards for your symbols, attributes, and layers.

Training

Invest in training for yourself and your staff on the chosen method.

Start Small

Don't try to implement a complex system all at once. Start with a simple project and gradually expand your capabilities.


Documentation

Document your processes and standards.

Consider Electrical CAD Software

While you can do this in AutoCAD/BricsCAD, specialized electrical CAD software (like AutoCAD Electrical or similar from BricsCAD) is built for this. They have built-in tools for generating SLDs and 3LDs, managing component data, and performing electrical calculations. This would greatly increase your efficiency.


Charge More for Redundant Deliverables:
Don't be afraid to charge a premium for the extra effort required to produce redundant diagrams, especially if they don't add value to the project. Explain to the client why you believe a single diagram is sufficient, but be prepared to deliver what they want if they insist (at the appropriate price).By implementing one of these strategies, you can significantly reduce the time and effort required to maintain your SLDs and 3LDs, while also improving data accuracy and consistency. Remember to start small, standardize your practices, and invest in the right tools and training. Good luck! Flag for review

Previous Question Next Question