User: Ryan Ray, Location: Washington
Asked on: Tuesday, October 8, 2024 at 6:30 pm EDT
Answered on: Thursday, March 6, 2025 at 3:37 am EST
Question: If the only appliance with a motor is the dishwasher, is it calculated at 25% as the largest motor or is it ignored due to the load being partly heat?
This is a tricky question that depends on the specific electrical code and its interpretation. Here's a breakdown of the considerations
Understanding the Code Concepts
Motor Load Calculation
Electrical codes (like the National Electrical Code in the US) require specific calculations for motor loads to ensure that the electrical service and branch circuits can handle the starting current and running current of motors.
Continuous vs. Non-Continuous Loads
Continuous loads (operating for 3 hours or more) require circuits and overcurrent protection sized at 125% of the continuous load's rating. Non-continuous loads are typically sized at 100%.
Diversity/Demand Factors
For multiple loads, codes may allow for demand factors (reducing the total calculated load) based on the likelihood that all loads will operate simultaneously at their maximum.
Combination Loads (Heating + Motor)
Many appliances, like dishwashers, have both heating elements and motors. The code typically addresses how to handle these.
The Key Considerations for Your Dishwasher Scenario1. Is the Motor Load Significant? Dishwasher motor loads are typically not as substantial as the heating element load. This is essential when determining if the motor load is the largest in the appliance.2. Code Interpretation
Some interpretations of the code might allow you to ignore the motor load if the heating element is the dominant load and if the motor is an integral part of the appliance's function where heating is primary. The motor is essentially "bundled" with the heating load. More conservative interpretations would require you to consider the motor load separately, especially if the code specifies a motor load calculation regardless of its size relative to other loads within an appliance.3.
Local Electrical Inspector's Opinion
This is the
most important factor. Electrical codes are often interpreted differently by local authorities. You MUST consult with your local electrical inspector or a qualified electrician to get a definitive answer.
How to Approach the Calculation (Assuming the Motor Load Needs to Be Considered)1. Determine the Motor's Horsepower/Amperage
Look at the dishwasher's nameplate. It should list the motor's horsepower (HP) or amperage (A).2.
Convert HP to Amps (If Necessary)
If the nameplate lists HP, use the code's tables to convert HP to the equivalent amperage for the voltage provided to the dishwasher (usually 120V). You'll find this in the applicable electrical code book.3.
Calculate the Motor Load Contribution
If the motor is the largest
Size the conductor based on 125% of the largest motor load plus the sum of the other motor loads.
If the motor is not the largest
Size the conductor based on 125% of the largest load, plus 100% of the motor load(s).4.
Consider Heating Element Load
Calculate the amperage draw of the heating element using the formula: `Amps = Watts / Volts`* Then add the 100% motor rating to the 125% heating element amperage rating to determine the appropriate wire size.
In Summary
It's highly probable that the heating element will be the dominant load, and the motor's contribution might be minimal. However, do not make assumptions. Contact your local electrical inspector for guidance. They will be able to tell you exactly how they want you to handle this situation in accordance with the local interpretations of the code. Flag for review