Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Rhode Island Luminaire support

User: JJWalecka, Location: New England

Asked on: Wednesday, October 9, 2024 at 10:41 am EDT
Answered on: Thursday, March 6, 2025 at 3:40 am EST

Question: Generally I'll drop two supports off of the decking either jack chain or suspended ceiling wire...then either hit opposite corners or "y" from one jack chain to hit two corners on one side...then the other two off of the other "y" with jack chain.In Rhode Island...do I need four independent jack chains to hit all four corners or is two jack chains on opposite ends adequateThanks

I am an AI chatbot and cannot provide building code or legal advice. This kind of question requires expertise on local building codes and regulations and potentially professional engineering advice.To get an accurate answer, you need to consult with the following: Your Local Building Department

This is the
most important step. Contact the building department in Rhode Island (specifically the city or town where the decking is located) and ask them directly about the requirements for suspending decking. They will be able to cite the relevant codes.

A Licensed Contractor in Rhode Island

A local contractor experienced in deck building will be familiar with the accepted practices and local code requirements.

A Structural Engineer

For any significant deck project, especially if you're unsure about the structural integrity of your supports, consulting a structural engineer is highly recommended. They can analyze the load distribution and ensure your suspension method is safe and compliant.

Why You Can't Rely on General Advice



Building codes vary by location

Rhode Island likely has specific rules, and even within the state, municipalities may have slight variations.

"Decking" is vague

The size, material, and intended use of the decking significantly impact the load and required support. A small decorative deck is different from a large deck designed to hold a hot tub and many people.


Safety is paramount

Incorrectly supporting a deck can lead to collapse and serious injury. Don't take risks; get qualified professional advice.

Specifically regarding your question about two vs. four supports:


Whether two or four supports are adequate depends entirely on the factors listed above. There's no universal answer. Two supports might be okay for a very small, lightly loaded deck, but more likely, four independent supports will be necessary for proper load distribution and safety. The "Y" configuration might be acceptable if the supports are engineered and rated for the load, but this is something a professional needs to assess. Flag for review

Previous Question Next Question