User: julianov, Location: NYC
Asked on: Wednesday, October 9, 2024 at 11:43 am EDT
Answered on: Thursday, March 6, 2025 at 3:40 am EST
Question: Hello all.I have a question: Is there a commercially available junction box sized 36''x24''x24''? I couldn’t find one of that size in the Hoffman catalog. Why do I need this size? It’s because I need to connect 6 conduits of 4'' at the bottom, and 6 conduits of 4'' on each side (left and right), as shown in this image:
You're right, a standard, readily available junction box of that size is going to be very difficult to find in most standard catalogs like Hoffman. You're pushing into custom fabrication territory with those dimensions and conduit requirements.Here's a breakdown of why and your possible options
Why it's hard to find off-the-shelf:
Size
36"x24"x24" is a large enclosure. Standard enclosures are typically smaller for ease of handling, shipping, and installation.
Conduit Density
Twelve 4" conduits entering the box is a lot of conduit. The physical space required for the conduit bodies (LB's, LL's, etc.) alone is significant. Even if you use short radius elbows, it still adds up.
Standardization
Manufacturers typically produce what sells most often. A box that size with that many large conduit entries isn't a common requirement for most applications.
Cost
A box that large, made of steel or stainless steel thick enough to be robust, is going to be expensive.
Your Options
Custom Fabrication
This is the most likely solution. Contact a metal fabricator who specializes in enclosures. You'll need to provide them with detailed drawings specifying: Exact dimensions (36"x24"x24" internal dimensions are critical) Material (Steel, Stainless Steel, Aluminum - choose based on environment and application) Material Thickness (Typically 12 gauge to 10 gauge steel for a box of that size) Conduit Entry Locations and Hole Sizes (Precise locations and knockout/hole sizes for the twelve 4" conduits) NEMA Rating (Specify the required NEMA rating (e.g., NEMA 3R, NEMA 4, NEMA 4X) based on the environment). Door/Cover Requirements (Hinged door or removable cover? Latches, hinges, and gaskets will impact cost). Grounding Provisions (Where and how do you want grounding lugs or studs installed?) Internal Mounting (Do you need any internal mounting plates or rails?) Finish (Powder coating is common for steel, but specify color).Fabrication will be the most expensive option.2.
Multiple Smaller Boxes
If you can possibly re-engineer your design, consider using multiple smaller junction boxes connected together with short conduit nipples. This is often a more economical approach than a custom enclosure. This will require careful planning to ensure you meet code requirements (wire fill, bend radii, etc.)3.
Consider a Wireway or Trough
Instead of a junction box, a wireway or trough might be more suitable. Wireways are typically longer and narrower than junction boxes and are designed for running long lengths of wire with tap-offs. If your application involves more of a "wire routing" scenario than a "junction" scenario, this could be a better fit. However, wireways often come with a hinged cover and are open at the bottom to allow easy access to wires.4.
Modular Enclosure System
Some manufacturers offer modular enclosure systems that can be combined to create larger custom configurations. This might be a middle ground between fully custom fabrication and using standard boxes. Look at companies that specialize in control panel enclosures.
Important Considerations Before Proceeding
Code Compliance
Ensure your design meets all applicable electrical codes (NEC in the US, CEC in Canada, etc.). Pay close attention to wire fill requirements, bending radii, and grounding.
Environmental Factors
Consider the environment where the junction box will be located (indoor/outdoor, wet/dry, corrosive, etc.) when selecting materials and NEMA rating.
Wire Management
Think about how you'll manage the wires inside the box to prevent tangling and ensure proper connections. Wire ties, dividers, and labeling can be helpful.
Accessibility
Consider how you'll access the box for maintenance and troubleshooting. A hinged door might be preferable to a removable cover.
Weight
A large enclosure full of wires and conduit can be very heavy. Consider how you'll support the box.
Recommendations
Re-evaluate your design
Can you achieve the same functionality with multiple smaller boxes or a wireway?2.
Consult with a qualified electrical engineer or designer
They can help you optimize your design and ensure code compliance.3.
Get quotes from multiple fabricators: Shop around to get the best price on custom fabrication.Good luck! Let me know if you have any more questions. Flag for review