Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: 100% Rated Breakers

User: charlie b, Location: Lockport, IL

Asked on: Wednesday, October 9, 2024 at 1:52 pm EDT
Answered on: Thursday, March 6, 2025 at 3:41 am EST

Question: I am reviewing a project for which the designers believe all breakers 100 amp and above should be rated 100%. I can't get them to tell my why. The facility serves a cybersecurity function. The first two levels of distribution are switchgear, but the requirement appears on one-lines that show switchboards and distribution panels. Questions:Any reasons that 100% rating is a good idea?Any reasons (other perhaps than cost) that it's a bad idea?What might be the difference in cost (in dollars or in percent)?Does "100% Rated" mean, for example, that you could place 200 amps of continuous load on a 200 amp 100% rated breaker?

Okay, let's break down the 100% rated breaker question.

Understanding 100% Rated Breakers

A standard circuit breaker is generally rated to carry only 80% of its nameplate current continuously. This means a 200A breaker is designed for a continuous load of 160A. The other 20% is a safety factor.A "100% rated" breaker is designed and tested to carry 100% of its nameplate current continuously. This is achievable through better heat dissipation design and more robust materials.

Why Might Designers Want 100% Rated Breakers (Good Ideas)? Reduced Panelboard/Switchboard Size

If you can load breakers to 100% instead of 80%, you may be able to use smaller panels or switchboards, as you need less space for breaker derating. This can save on footprint and potentially cost (though the breakers themselves will be more expensive).


Higher Density Loading

In situations where space is at a premium, 100% rated breakers allow you to pack more load into a smaller electrical distribution system. This is important in cybersecurity facilities.

Future-Proofing (potentially)

If there's a reasonable expectation that loads might increase in the future, using 100% rated breakers gives you more headroom without having to replace the breakers or potentially the entire panelboard/switchboard.


Precise Load Management/Optimization

In some critical applications, knowing you can load a breaker to its full rating allows for more precise load management and optimization strategies.

Compliance

Cybersecurity facilities could have critical systems to meet stringent requirements related to reliability and fault tolerance. 100% rated breakers may contribute to meeting those requirements.

Reasons Against 100% Rated Breakers (Bad Ideas)?
Cost

This is the biggest factor. 100% rated breakers are significantly more expensive than standard breakers.

Heat Management

While 100% rated breakers are designed to handle the heat, they still generate heat. Proper ventilation and cooling of the panelboard/switchboard are even more critical with 100% rated breakers. Failure to adequately manage heat can lead to premature failure of the breakers and other components.


Coordination/Selectivity

Using 100% rated breakers can complicate coordination studies. You have to carefully consider the upstream and downstream breakers and their time-current characteristics to ensure proper selectivity (the breaker closest to the fault trips first).

Over-Engineering

Unless there's a clear and justifiable need to load breakers to 100%, using 100% rated breakers could be considered over-engineering. Standard breakers with appropriate safety margins might be perfectly adequate.


Complexity

Specifying, installing, and maintaining 100% rated breakers can add complexity to the project.

Availability

100% rated breakers may not be readily available from all manufacturers or in all sizes. This could lead to longer lead times or force you to use a specific manufacturer.

Cost Difference


The cost difference is difficult to quantify precisely without knowing the specific breaker sizes and manufacturers. However, as a
rough estimate: Expect 100% rated breakers to cost at least 2x to 4x the price of a standard (80% rated) breaker. This can vary based on amperage and manufacturer. This cost difference can have a ripple effect. While you might be able to use smaller panels, the increased breaker cost could outweigh the panel cost savings.

Can You Put 200 Amps on a 200 Amp 100% Rated Breaker?Yes. That's the fundamental principle. A 200 amp
100% rated breaker is designed to carry 200 amps continuously without tripping due to overload. However, it's crucial to understand the "continuously" part. You need to ensure that the load is truly continuous and not subject to significant inrush currents or intermittent spikes that could still cause nuisance tripping.

Why Might a Cybersecurity Facility Want This?

Cybersecurity facilities often have very stable, predictable loads, like server racks, cooling equipment, and network infrastructure. These loads are generally continuous and don't have significant fluctuations. 100% rated breakers can be very suitable for these applications.The continuous nature of a cybersecurity facility aligns with the intended use of 100% rated breakers, which are engineered to handle sustained current draw. Cybersecurity facilities require uninterruptible service and critical systems to meet stringent requirements related to reliability and fault tolerance.

Recommendations for Your Review


Demand Justification

Force the designers to clearly articulate
why* they believe 100% rated breakers are necessary. "Because it's better" is not a sufficient answer. They need to provide specific load calculations, future growth projections, space constraints, or reliability requirements that justify the additional cost.2.

Load Analysis

Scrutinize their load calculations. Are they accurately accounting for continuous vs. non-continuous loads? Are they considering future load growth?3.

Cost-Benefit Analysis

Request a detailed cost-benefit analysis that compares the total cost of using 100% rated breakers (including breaker cost, panel cost, installation cost, etc.) to the cost of using standard breakers and potentially larger panels.4.

Heat Management Plan

Ensure the design includes a comprehensive heat management plan for the panelboards/switchboards. This should include ventilation calculations, temperature monitoring, and potentially forced-air cooling.5.

Coordination Study

Verify that a thorough coordination study has been performed to ensure proper selectivity with the 100% rated breakers.6.

Alternatives:
Explore alternatives to 100% rated breakers. Could they achieve similar results by oversizing standard breakers, using energy-efficient equipment to reduce loads, or optimizing load management strategies?By asking these questions and demanding data-driven answers, you can make an informed decision about whether 100% rated breakers are truly justified for this project. Flag for review

Previous Question Next Question