Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Painting Around Cans

User: tallgirl, Location: Glendale, WI

Asked on: Sunday, October 13, 2024 at 1:43 pm EDT
Answered on: Thursday, March 6, 2025 at 3:51 am EST

Question: Today is Ceiling Painting Day. I've got 6 cans. I can pull the bulb holder down and out, but then I ain't got no light. I've tried covering in painters tape, but then I ain't got no light. I'm currently trying to use a baggie to cover the trim and light.What the hell am I doing wrong? I primed by hand around most of them already, and I'm hating my life, because I still have to texturize and paint.

Okay, Ceiling Painting Day can definitely be a tough one, especially with those pesky can lights! It sounds like you're wrestling with the age-old problem of how to paint around them without making a huge mess and still being able to see. Let's break down some strategies

The Core Problem: Light vs. Protection

You've nailed the central issue: you need to see what you're doing, but you also need to protect the light fixtures.

Here's what you should do



Embrace the Darkness (Temporarily)

The best way to paint around can lights is to drop the holder and bulb out of the light. You can just cover the hole left with painter's tape. Once it's painted, you can put the holder and bulb back in place.


Turn off the breaker.
Before doing this, kill the power. Carefully lower the light. There is usually either a metal clip or screws holding the light in place. Remove these and drop the light down from the ceiling. Disconnect the light bulb. If there is no way to disconnect it, you can carefully hang the light down while you work. Make sure it's not touching any wet surfaces. Let the paint dry before putting it back.Here's Why Bagging, Taping Isn't Ideal



Bagging

It's cumbersome, gets in the way, and doesn't provide a tight seal, leading to overspray.

Taping

As you discovered, it blocks the light, and it's difficult to get a perfectly tight seal on those rounded edges.

Additional Tips for a Less Painful Ceiling Painting Experience



Proper Prep is Key

You've already primed, which is good. Make sure you also:

Dust/Wipe the Ceiling

A clean surface helps the paint adhere better and prevents dust particles from getting trapped in your paint.


Protect Everything Else

Cover your floors with drop cloths (canvas is best). Cover furniture. This will save you a ton of cleanup time later.

Use Quality Tools

A good quality roller and brush will make a world of difference.


Don't Overload Your Roller

Too much paint on the roller will lead to drips and uneven coverage.

Work in Sections

Divide the ceiling into manageable sections. This will help you maintain a wet edge and prevent lap marks.


Good Ventilation

Open windows or use a fan to help the paint dry faster and reduce fumes.

Take Breaks

Ceiling painting is tiring. Don't try to power through it all at once. Step back, stretch, and take breaks as needed.


Embrace the Process

It's not always fun, but a freshly painted ceiling can make a huge difference in the look and feel of a room.

You've Got This!


Ceiling painting can be frustrating, but with a good plan, the right tools, and a little patience, you can get it done. Don't give up – you're already halfway there! Remember to focus on one step at a time, and celebrate your progress along the way. Good luck! Flag for review

Previous Question Next Question