Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Help with install?

User: dmalkokian, Location: Brooklyn

Asked on: Sunday, October 13, 2024 at 8:40 pm EDT
Answered on: Thursday, March 6, 2025 at 3:51 am EST

Question: Splicing in wire gutter?So need help here. Doing a panel changeout next week and want to know your guy's opinions. I was thinking of putting a wire gutter above the panel and splice the existing wire with the new wire. But my boss said to just use the existing wire.

Okay, let's break this down and analyze the pros and cons of each approach, along with best practices. Your boss's approach is likely driven by cost and simplicity, but your approach, while potentially more work upfront, could offer long-term benefits.

Option 1: Using a Wire Gutter and Splicing (Your Idea) Pros



Cleanliness & Organization

A wire gutter makes for a much cleaner and more organized installation. It allows you to manage the wires neatly, keep them separated, and make future modifications easier.

Easier Future Modifications

If you need to add circuits in the future, having a gutter makes it far easier to tap into existing conductors or add new ones without disturbing the entire panel.


Less Stress on Existing Wires

If the existing wires are a bit short or brittle, splicing in the gutter reduces the stress on the original conductors during the panel changeout. It gives you more leeway.

Allows for Better Wire Management

You can arrange the conductors neatly, making troubleshooting easier down the road.


Code Compliance (Potentially)

Depending on local codes and the existing installation, a gutter might actually help with code compliance by providing proper wire bending space and organization. This is especially true if the existing panel was cramped.

Professional Appearance

A gutter provides a more professional and thought-out appearance. This can be important if the installation is visible or if you ever sell the property.


Cons



Increased Cost

A wire gutter costs money (material) and takes additional time to install (labor). This is the biggest drawback.


More Labor

Splicing takes time. You need to make proper, code-compliant splices, which adds to the overall project duration.

Potential for Splicing Errors

Improper splices can lead to loose connections, overheating, and even fire hazards. It's crucial to do it right.


Requires More Space

You need to have sufficient space above the panel to install the gutter.

Possible Code Issues

Depending on local codes, there might be restrictions on how many splices you can have in a raceway or gutter.

Option 2: Reusing the Existing Wires (Your Boss's Idea)
Pros



Cost-Effective

Saves the cost of the gutter, connectors, and splicing materials.


Faster Installation

Reduces the amount of labor involved, making the panel changeout quicker.

Fewer Points of Failure

No splices means fewer potential points of failure in the electrical system.


Cons



Potential for Messy Wiring

If the existing wires are short or difficult to manage, the wiring in the new panel could be cramped and messy.


Increased Risk of Damage

If the existing wires are brittle or have damaged insulation, there's a higher risk of damaging them further during the panel changeout.

Difficult Future Modifications

Adding circuits in the future will be more challenging without a gutter to provide extra space and access.


May Violate Code

If the existing wire is not long enough to properly land in the new panel without being stretched or stressed, it could be a code violation. Proper wire bending space is critical.

More Stress on Existing Wiring

Moving and re-bending old wiring can cause it to fail.


May Result in a Crowded Panel

Without a gutter, the new panel could be overcrowded, making it difficult to work on and potentially violating code.

Key Considerations Before Making a Decision


Condition of Existing Wires

This is the most important factor. If the existing wires are in good condition (insulation is intact, not brittle, and long enough), then reusing them might be acceptable. However, if they are damaged or short, a gutter is definitely the better option.2.

Wire Length

Are the existing wires long enough to reach the new panel's breakers without excessive stress or stretching? Proper wire bending space inside the panel is critical for safety and code compliance. If the wires are barely long enough, adding a gutter is a much better idea.3.

Panel Size

Is the new panel the same size or larger than the old panel? If it's larger, the existing wires might not be long enough to reach the new breakers.4.

Local Codes

Check your local electrical codes and regulations. Some jurisdictions have specific requirements for wire bending space, wire management, and the use of gutters.5.

Future Needs

Consider whether the homeowner might want to add circuits in the future. A gutter will make future modifications much easier.6.

Budget

Of course, cost is a factor. Weigh the cost of the gutter against the potential long-term benefits and risks.

How to Make a Code-Compliant Splice in a Gutter



Approved Connectors

Use only UL-listed connectors that are specifically designed for splicing wires in a gutter. Common options include:


Split Bolt Connectors

These are good for larger gauge wires. They need to be properly insulated after installation with appropriate tape or insulating boots.

Insulated Multi-Port Connectors

These are often preferred for ease of use and safety. They are fully insulated and allow you to connect multiple wires together. Examples are Polaris connectors or similar.


Wire Nuts (for smaller gauges)

While wire nuts can be used, they are generally less desirable than other options in a gutter due to the difficulty of ensuring a secure and insulated connection. If you use them, make sure they are the correct size for the number and gauge of wires, and that they are properly twisted and taped.

Proper Insulation

All splices must be properly insulated to prevent short circuits. If using split bolts, you
must use insulating tape rated for the voltage. Insulated connectors are preferable.

Secure Connections

Ensure that all connections are tight and secure. Loose connections can cause overheating and fire hazards. Use a torque screwdriver or wrench to tighten connectors to the manufacturer's specified torque value.

Gutter Fill

Don't overfill the gutter. Check the code for the maximum allowable fill percentage.


Labeling

Label the conductors clearly.

Recommendation

Given the information you've provided, and assuming you're a competent electrician, I would lean towards using the wire gutter, especially if: The existing wires are short, brittle, or damaged. The new panel is larger than the old one. There's a good chance of future circuit additions. You want a clean and professional installation.

However, before proceeding, you MUST


Inspect the existing wiring thoroughly.
Assess its condition, length, and any signs of damage.2. Check local electrical codes. Make sure your plan complies with all applicable regulations.3. Discuss your concerns with your boss. Explain the benefits of using a gutter and the potential risks of reusing the existing wires. Present your case clearly and professionally. Ultimately, you need to follow their instructions, but you also have a responsibility to voice your concerns if you believe the proposed method is unsafe or not up to code.4. Get approval (if needed). If you're going to use a gutter, make sure you get approval from your boss or the client before you start the work.Ultimately, the decision is yours and your boss's. Consider safety, code compliance, and the long-term implications of each approach. Flag for review

Previous Question Next Question