Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Copper Clad Aluminum NM vs Copper NM for Small Scale Multifamily

User: bearthebuilder3000, Location: Tampa, FL

Asked on: Monday, October 14, 2024 at 10:18 am EDT
Answered on: Thursday, March 6, 2025 at 3:52 am EST

Question: Hello Everyone,I'm an Architect / GC and we're working on a small scale multifamily community made up of single story duplex and quadplex buildings. The largest unit is approximately 1,350 SF. The basis of design for the electrical wiring is standard copper NM, however our EC is proposing that we substitute CCA NM as it represents a "substantial" savings across the project. Unfortunately, I have no experience with CCA. From what I am finding online, its much softer and breaks more easily than copper, but it can carry more current.What are your thoughts on CCA NM? Are there any safety concerns that might offset the potential cost benefit? Is it something you would be willing to specify for small scale residential? Would you put it in your own home?

Okay, this is a common debate in the electrical industry, and it's wise of you to be cautious and do your due diligence. Here's a breakdown of my thoughts on CCA NM cable for your project, considering the pros, cons, and key considerations

My Overall Stance (In short):

For a new residential construction project of this scale (especially multifamily), I would STRONGLY recommend sticking with solid copper NM cable and push back on the electrical contractor's proposal, unless they can demonstrably prove cost savings in the long run after the increase of install costs that arise with CCA installation. The potential risks and drawbacks with CCA generally outweigh the immediate cost savings.

Here's a detailed breakdown



Arguments Against Using CCA NM Cable



Safety Concerns (and why they matter)



Increased Resistance

CCA has a higher resistance than solid copper. This means it will generate more heat for the same amount of current. While rated appropriately by UL, the higher heat can exacerbate problems with connections (especially if not perfectly torqued and maintained) and can lead to premature insulation breakdown over time. Overheating can be a fire hazard.

Corrosion

Aluminum is more susceptible to corrosion than copper, especially when exposed to moisture or certain chemicals. While the copper cladding helps, scratches or nicks during installation can expose the aluminum core, leading to corrosion. This corrosion increases resistance at connections, leading to more heat and potential failures. Multifamily construction exposes the wiring to more risk.


Expansion and Contraction

Aluminum expands and contracts more than copper with temperature changes. This difference in expansion/contraction can loosen connections over time, leading to arcing and potential fire hazards.

Installation Damage

You're already aware of this, but it's important. CCA is more brittle and prone to breakage during installation, especially when pulling it through conduit or making tight bends. This leads to wasted material and increased labor costs to replace damaged sections. Damage can also occur
after installation, such as during drywalling or other finishing work.

Compatibility Issues

While connections should be rated for both copper and aluminum, there's always a risk of using incompatible connectors or improper installation techniques, especially if the electricians aren't as familiar with working with CCA.

Long-Term Reliability

The long-term reliability of CCA in residential applications is still debated. While it meets UL standards, the potential for corrosion, connection problems, and insulation breakdown raises concerns about its lifespan compared to solid copper.


Installation Challenges and Costs



Increased Labor

The increased fragility means installers need to be
much more careful. More time spent pulling, handling, and terminating the wire translates directly into increased labor costs. You may even need to require special training for your electricians.

Higher Waste

More breakage during installation leads to more wasted material.

Special Connectors/Techniques (Potentially)

While not always required, it's often recommended to use connectors specifically designed for aluminum conductors or to use anti-oxidant compounds to prevent corrosion at connections. This adds to material costs and installation time.


Code Compliance and Inspections



Meets Code (Typically)

CCA NM cable that is UL-listed meets the requirements of the National Electrical Code (NEC).
However, inspectors may be more scrutinizing of CCA installations, especially regarding proper connections and grounding. Be prepared for closer scrutiny.

Local Amendments

Be sure to check for any local amendments to the NEC that might restrict or prohibit the use of CCA.

Future Repairs and Modifications



Easier to Damage

Anytime future work is done on the electrical system (adding outlets, changing fixtures, etc.), the CCA wiring is more susceptible to damage.

Compatibility Issues (Later)

Future electricians may not be aware that CCA was used and might inadvertently use incompatible connectors or techniques, leading to problems.


Resale Value and Perception



Negative Perception

While not necessarily a quantifiable factor, some homeowners have a negative perception of CCA wiring. This
could potentially impact the resale value of the properties, although that's difficult to predict.

Arguments
For Using CCA NM Cable (and why they might not be compelling)



Cost Savings

This is the primary driver, and the electrician is likely emphasizing this. However, you need to carefully analyze the total cost of the project, including the potential for increased labor, waste, special connectors, and future maintenance. Get a detailed cost breakdown comparing solid copper vs. CCA.

Lighter Weight

CCA is lighter than solid copper, which
can make it easier to handle and install. However, this advantage is often offset by its fragility.

Meets UL Standards

This is true, but UL listing doesn't guarantee problem-free performance. It simply means the cable meets certain minimum safety standards.

Questions to Ask Your Electrical Contractor



Detailed Cost Breakdown

Ask for a detailed cost comparison, including material costs, labor costs (factoring in increased installation time and potential waste), and any additional costs for special connectors or anti-oxidant compounds.


Experience with CCA

How much experience does the contractor have with installing CCA NM cable? Have they encountered any problems with it in the past?

Connection Methods

What types of connectors will they be using? Are they rated for both copper and aluminum? Will they be using anti-oxidant compounds?


Warranty

Will the contractor provide an extended warranty on the electrical system if CCA is used?

References

Can they provide references from other projects where they have used CCA NM cable?

Would I Use It in My Own Home?
Absolutely not. The potential long-term risks and hassle outweigh the potential savings. My peace of mind is worth more than the upfront cost difference.

Recommendations for
Your Project


Push Back

Strongly consider sticking with solid copper NM cable unless the electrical contractor can provide a
very compelling case for CCA, including a detailed cost analysis, a proven track record of successful CCA installations, and a commitment to using proper installation techniques.2.

Consider a Compromise (Maybe)

If you are still considering CCA, consider using it only for specific circuits or areas where the risk is lower (e.g., general lighting circuits, but
not for high-load appliances or circuits that are likely to be modified in the future). This allows you to potentially realize some cost savings while minimizing the risk. This is not my preferred approach.3.

Specify Installation Requirements

If you decide to use CCA, be very specific in your contract about installation requirements, including:
Use of connectors rated for both copper and aluminum. Application of anti-oxidant compounds at all connections. Proper torquing of all connections. Careful handling to avoid damaging the cable. Inspection and testing to ensure proper connections and grounding.4.

Increased Inspections

Inform your electrical inspector that CCA is being used and request a more thorough inspection of the electrical system, especially regarding connections and grounding.5.

Document Everything

Keep detailed records of the type of wiring used, the installation methods, and any inspections performed. This will be helpful for future maintenance and repairs.6.

Consider the Bigger Picture

Remember, electrical problems can be very costly to fix, especially in a multifamily building. The potential savings from using CCA might be quickly wiped out by even a single electrical fire or a series of maintenance issues.

In conclusion, while CCA NM cable can be used safely if installed correctly, the risks and potential drawbacks generally outweigh the benefits in new residential construction, especially in a multifamily setting. Stick with solid copper unless there's a very compelling reason to switch.
Flag for review

Previous Question Next Question