Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Utility voltage parameters.

User: nizak, Location: Cherry Valley NY, Seattle, WA

Asked on: Tuesday, October 15, 2024 at 11:37 am EDT
Answered on: Thursday, March 6, 2025 at 3:57 am EST

Question: I have a residence that is being supplied with —233V at the meter. Certain loading can take this as low as 228V.Would it be unreasonable to request a higher voltage at the meter?

Yes, it would be reasonable to request a higher voltage at the meter, especially if you're consistently seeing drops down to 228V under normal load. Here's why and how to approach it

Why it's Reasonable:
Voltage Tolerance

Appliances and electrical equipment are designed to operate within a specific voltage range. In North America, this is typically around 120V (for individual circuits) and 240V (for appliances like dryers, stoves, and AC units). A voltage of 233V at the meter is already slightly low, and 228V under load is pushing the lower limits.


Efficiency and Performance

Lower voltage can impact the efficiency and performance of your appliances. Motors may run hotter and less efficiently, leading to higher energy bills and potential premature failure. Some electronics might not function properly.

Safety Concerns

In extreme cases, consistently low voltage can pose a safety risk. It can overload wiring, potentially leading to overheating and fire hazards. While a drop to 228V is unlikely to cause immediate danger, it's a sign of a system that's being stressed.


Utility's Responsibility

The utility company is generally responsible for maintaining voltage within a reasonable range.

How to Approach the Utility Company

1.

Document the Problem



Monitor and Record

Don't rely solely on your perception. Use a multimeter to measure the voltage at the meter (if accessible) and at various outlets in your home at different times of the day, especially when you have heavy loads running (e.g., air conditioner, dryer, oven). Record the date, time, and what appliances were running when you took the measurements.


Take Pictures or Videos

If possible, photograph or video the multimeter readings along with the load being tested.2.

Contact the Utility Company



Start with a Phone Call

Explain the situation to the customer service department. Be polite and professional. Clearly state that you are experiencing low voltage and that it's dropping to 228V under normal load. Mention the date/time you've observed this.


Escalate if Necessary

If the initial phone call doesn't get a satisfactory response, ask to speak to a supervisor or someone in the technical department.

Follow Up in Writing

After the phone call, send a written letter or email summarizing the problem, the measurements you've taken, and your request for investigation and resolution. This provides a documented record of your complaint.3.

Be Prepared to Provide Information



Your Account Number

Make sure you have your utility account number handy.

Specific Examples

Be ready to provide specific examples of when you've experienced the low voltage, what appliances were running, and the measured voltage.


Photographic Evidence

Attach any pictures or videos you've taken.4.

What the Utility Might Do



Investigate

The utility company will likely send a technician to investigate. They may measure the voltage at the meter, at the transformer serving your home, and possibly at neighboring homes.


Check the Transformer

They will check the transformer for proper operation and tap settings. Transformers have adjustable taps that can be changed to slightly increase or decrease the output voltage.

Check Line Conditions

They will also look for any issues with the power lines serving your area, such as loose connections or overloaded conductors.


Suggest Solutions

Depending on the cause, the utility company may: Adjust the transformer tap. Upgrade the transformer. Upgrade the wiring to your home or in the neighborhood. Suggest that you consult with a licensed electrician to check your home's wiring for any issues.

Important Considerations



Home Wiring

While the utility is responsible for the voltage
at the meter, the voltage inside your home can also be affected by the quality of your home's wiring. Loose connections, undersized wiring, or overloaded circuits can contribute to voltage drops. If the utility finds no issues with their equipment, they may recommend that you hire a licensed electrician to inspect your home's wiring.

Neighboring Issues

Low voltage can sometimes be a neighborhood-wide problem if the transformer is overloaded or the wiring is inadequate for the number of homes being served. If you suspect this, ask your neighbors if they're experiencing similar issues.*

Peak Demand

Voltage drops are often more pronounced during peak demand times (e.g., hot summer afternoons when everyone is running their air conditioners). Be sure to take measurements at these times.

In summary, don't hesitate to contact your utility company and request a review of your voltage situation. Be proactive in documenting the problem and providing them with the information they need to investigate effectively. A consistently low voltage situation is definitely worth addressing for the sake of efficiency, appliance lifespan, and potentially safety.
Flag for review

Previous Question Next Question