Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Battery over 4' high

User: Zee, Location: CA

Asked on: Tuesday, October 15, 2024 at 10:57 pm EDT
Answered on: Thursday, March 6, 2025 at 3:58 am EST

Question: Would a battery mounted on a home's exterior wall next to the driveway need a bollard if it were over 4 feet above grade?

This is a tricky question because the need for a bollard depends on several factors, and the answer isn't a simple yes or no. Here's a breakdown of the things to consider: Building Codes and Local Regulations

This is the MOST important factor. Local building codes and regulations are the final authority on this matter. Check with your local municipality's building department or permitting office. They may have specific requirements for the protection of electrical equipment, especially batteries. They might specify things like minimum distances from driveways, required protection, etc.

Manufacturer's Requirements

The battery manufacturer's installation instructions often dictate specific protection measures. These might include bollards, barriers, or other means of preventing damage.

Potential for Vehicle Impact

Even at 4 feet above grade, a vehicle could potentially hit a battery, especially a larger truck or SUV. The likelihood depends on:

Proximity to the driveway

How close is the battery to the edge of the driveway or turning radius of vehicles entering/exiting?


Typical vehicle size

Are large vehicles commonly driven in the driveway?

Driver skill/care

Is there a history of close calls or accidental bumps?


Grade of the driveway

Is the driveway on a slope that might cause vehicles to roll into the wall?

Risk Assessment

It's prudent to conduct a risk assessment. Consider the consequences of the battery being damaged (e.g., fire, electrical hazard) and the likelihood of such damage. If the consequences are severe and the likelihood is more than negligible, protection measures are warranted.

Definition of "Bollard"

The term "bollard" might be interpreted broadly. It might not necessarily require a traditional steel post. A concrete curb, a raised planter, or a sturdy fence section could potentially serve the same purpose.

Material Composition of Wall

If the wall itself is made of durable material, such as reinforced concrete or brick, it may provide adequate protection.

In Summary

While being over 4 feet above grade reduces the risk, it doesn't automatically eliminate the need for a bollard.

Recommended Action


Check Local Building Codes

Contact your local building department.2.

Consult Manufacturer's Instructions

Review the battery manufacturer's installation requirements.3.

Assess Risk:
Evaluate the likelihood and consequences of vehicle impact.If the local codes or manufacturer require protection, or if your risk assessment suggests it's necessary, then install a bollard or other appropriate barrier. It's always better to err on the side of safety. Flag for review

Previous Question Next Question