Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Switchboard meter sending phone calls when alarm triggers

User: EE_Wisco, Location: Fond Du Lac, WI

Asked on: Thursday, October 17, 2024 at 4:49 pm EDT
Answered on: Thursday, March 6, 2025 at 4:04 am EST

Question: I was wondering if anyone knows of a way to have a switchboard meter or online meter platform to send plant managers a phone call in the instance the meter alarms from phase loss, over current, over/under voltage, etc. which is set up during commisioning. I know, currently, the online meter platform is capable of sending emails, but the owner would like a phone call. If no meter allows such function, is there a third-party device that can do so? I know if could potentially be set up through a BMS system via CTs on the mains and ran to the BMS controller to send the phone call. Let me know what y'all have seen.Thanks

You're on the right track! There are several ways to accomplish this, both through intelligent meters and with third-party add-ons. Here's a breakdown of approaches and things to consider

1. Meters with Direct Calling Capabilities (Rare, but they exist):
While less common, some high-end power meters do have built-in capabilities to make voice calls or send SMS alerts. These often involve an integrated cellular modem and pre-configured alert settings. You'd typically program phone numbers directly into the meter. Downside

These are niche products, and their cost and complexity tend to be higher. Configuration can be fiddly. They are not likely to have advanced control functionalities like a BMS system can offer.

2. Leveraging Existing Metering Platform + SMS/Voice Gateway

This is often the most practical solution. It involves your existing metering platform (which already sends emails) and a service that converts those emails into SMS or voice calls. This can be achieved several ways:

Email-to-SMS Services (Twilio, ClickSend, Plivo)

These services provide APIs (Application Programming Interfaces) that allow you to send SMS messages programmatically. You'd set up a rule (often within your existing meter platform's notification settings, or through a custom script) that, upon receiving a specific alarm email (phase loss, overcurrent, etc.), triggers a script to send an SMS to the plant manager's phone using the chosen service's API.

Example workflow

1. Meter detects overcurrent.
2. Metering platform sends an email to a dedicated "alert-handling" email address.3. A script (Python, Node.js, etc.) constantly monitors this email inbox.
4. When the script sees a matching email (based on subject line, body content, etc.), it extracts relevant information (alarm type, location) and sends it via SMS through Twilio (or similar).


Email-to-Voice Services (similar to above, but converts emails to voice calls)

Companies like IFTTT (If This Then That) have integrations with voice call services, but direct email-to-voice services are often more reliable and customizable.
The process is similar to email-to-SMS, but the API call sends a text-to-speech message to the phone number.

Important Considerations

You'll need to clearly articulate the alarm in the email, as that's what the voice message will speak. Consider adding a unique ID to the alarm for tracking. Also, ensure the voice calls are labeled clearly (e.g., "EMERGENCY POWER METER ALERT") so they don't get ignored.

3. BMS (Building Management System) or SCADA (Supervisory Control and Data Acquisition) Integration

This is the most robust and scalable option, especially for larger facilities. If you already have a BMS or SCADA system:


Direct Meter Integration

Many modern power meters support protocols like Modbus RTU/TCP, BACnet, or even direct OPC UA integration with BMS/SCADA systems. You can configure alarms within the BMS/SCADA system based on meter readings (CTs are not required if the BMS can read the meter data directly).

PLC (Programmable Logic Controller) + Cellular Modem

A PLC can read meter data and use its outputs to trigger a cellular modem for SMS/voice calls. PLCs are highly configurable and reliable.


BMS/SCADA Alerting

Most BMS/SCADA systems have built-in alerting capabilities, including SMS and email. You can configure escalating alerts (e.g., SMS to plant manager, then voice call to the director if no response).

4. Dedicated Alarm Monitoring Systems

These are specialized systems designed for remote monitoring and alerting of critical infrastructure. They typically use a combination of sensors, data loggers, and communication channels (cellular, Ethernet) to send SMS, email, or voice call alerts.

Key Considerations for Any Solution



Reliability

This is critical. You need a system that's consistently monitored, has redundancy, and is tested regularly. Consider using a reputable SMS/Voice gateway provider with guaranteed uptime.

Notification Escalation

What happens if the first person doesn't acknowledge the alarm? Implement a system that escalates to a supervisor after a certain amount of time.


Alarm Acknowledgement

Ideally, the person receiving the alert should be able to acknowledge it (e.g., by replying to the SMS or entering a code on a phone keypad). This prevents unnecessary escalation.

Customization

The solution should be flexible enough to handle different types of alarms and different recipient groups. For example, phase loss might go to the electrician, while an over-temperature condition might go to the maintenance manager.


Security

Protect your system from unauthorized access. Use strong passwords, secure communication protocols, and restrict access to sensitive configuration settings.

Documentation

Document the entire system, including the meter configurations, alert rules, SMS/Voice gateway setup, and contact lists. This makes it easier to troubleshoot and maintain.


Compliance

Ensure the solution meets any relevant regulatory requirements (e.g., data privacy laws, safety standards).

Cost

Consider the initial cost of hardware and software, as well as the ongoing costs of cellular data, SMS messages, and maintenance.

Which Solution is Best?


The best solution depends on your specific needs, budget, and existing infrastructure.
Small Facilities

Email-to-SMS/Voice gateway solutions might be the most cost-effective.

Medium Facilities

BMS integration is a good option if you already have a BMS. Otherwise, consider a dedicated alarm monitoring system or a more sophisticated email-to-SMS/Voice solution.


Large Facilities

BMS/SCADA integration is typically the best choice, providing the most comprehensive monitoring and control capabilities.

Recommendations


Inventory your existing systems

What power meters do you have? Do you have a BMS/SCADA system? What communication protocols do they support?2.

Assess your needs

What types of alarms are most critical? Who needs to be notified? What level of reliability is required?3.

Research SMS/Voice gateway providers

Compare pricing, features, and reliability.4.

Develop a proof-of-concept

Test the chosen solution in a controlled environment before deploying it to production.5.

Partner with a qualified integrator:
If you lack the in-house expertise, consider working with a company that specializes in power monitoring, BMS integration, or alarm monitoring. They can help you select the right solution, install it correctly, and provide ongoing support.Good luck! Let me know if you have more specific questions. Flag for review

Previous Question Next Question