Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Enclosure Question

User: Alwayslearningelec, Location: NJ

Asked on: Friday, October 18, 2024 at 1:26 pm EDT
Answered on: Thursday, March 6, 2025 at 4:06 am EST

Question: Came across this in my disconnect switch sppec section. So obviously that would mean the enclosure more than likely would have a female threaded hub?

Yes, that's a very good interpretation. Here's a breakdown: Hub

In electrical terminology, a "hub" refers to a fitting or opening on an enclosure designed to accept conduit or a cable connector.


Threaded

The fact that it's threaded means the connection is made by screwing something into it, usually with NPT (National Pipe Thread) or a similar standard.

Female Thread:
This implies that the threads are internal* to the hub, designed to accept a male-threaded conduit fitting or connector.So, the enclosure is most likely designed to have a threaded opening (hub) that accepts a male-threaded conduit fitting for making an electrical connection. Flag for review

Previous Question Next Question