Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: MC-PCS Duo connectors

User: Mdfili, Location: Miami, FL

Asked on: Saturday, October 19, 2024 at 10:24 am EDT
Answered on: Thursday, March 6, 2025 at 4:09 am EST

Question: We are running 12/2-16/2 MC-PCS Duo cable to countless recessed lights in a luxury home in Miami. The lights all have 1/2" knockouts. We are using tytpical available single and double connectors. Rather than enlarging the knock out in eack light, does anyone know of connectors that may have a more forgivable internal bore?

Okay, let's break down the challenges you're facing and explore some solutions for connecting MC-PCS Duo cable to recessed lights in a luxury Miami home without enlarging the 1/2" knockouts.

Understanding the Problem MC-PCS Duo Cable Size

12/2-16/2 MC-PCS Duo cable is relatively thick because it contains two separate circuits (12 AWG and 16 AWG conductors) plus a grounding conductor all bundled within the metal jacket.


Limited Knockout Size

Standard 1/2" knockouts are often tight, especially when dealing with larger-diameter cables like MC-PCS Duo. The internal bore of typical connectors can further restrict space.

Connector Body Size

Some single and double barrel connectors are larger and take up more space inside of the can light junction box, taking up even more space.


Luxury Home Standards

In a luxury home, neatness, reliability, and code compliance are paramount. Enlarging knockouts introduces potential for cosmetic issues and may violate listing of the lighting fixture.

Potential Solutions & Considerations


Here's a breakdown of connector options and strategies, from most likely to be code-compliant and acceptable, to less desirable alternatives:1. Careful Connector Selection (Most Preferred)



Specially Designed MC/AC Connectors

Look for connectors specifically designed for MC/AC (Metal Clad/Armored Cable). These are typically made to accommodate the cable jacket more easily.


"Low Profile" or Compact Connectors

Some manufacturers offer MC connectors with a lower profile and a slightly larger internal bore. Search for terms like "compact MC connector" or "low-profile MC connector." Check the product specifications carefully to see if they are compatible with the outer diameter of your 12/2-16/2 MC-PCS Duo cable. Some examples:

Arlington Industries

Arlington is well-regarded for innovative electrical products. Check their website for MC/AC connectors and look for specifications on cable diameter compatibility. They often have options that are more compact.


Bridgeport Fittings

Bridgeport is another reputable manufacturer. Examine their MC connector catalog, paying close attention to the listed cable diameter ranges.

Brands to Research

In addition to Arlington and Bridgeport, look at Thomas & Betts (ABB), Eaton (Crouse-Hinds), and Ideal Industries.


Key Features to Look For



Listed Cable Diameter Range

Critically important! Make sure the connector is UL listed for the outer diameter of your specific MC-PCS Duo cable. The cable manufacturer should provide the outer diameter spec.

Smooth Interior

A connector with a smooth interior bore will help prevent damage to the cable jacket as it's inserted.

Positive Grounding

Ensure the connector provides a reliable ground connection to the metal jacket of the MC cable.


Anti-Short Bushings

While most MC cable has an internal bonding strip, double-check that the connector either includes an anti-short bushing or allows one to be easily installed, especially where the cable is cut.2.

Proper Cable Preparation



Clean Cut

Use a proper MC cable cutting tool to make a clean, perpendicular cut on the cable jacket. This prevents burrs or jagged edges that can catch on the connector.


Deburr the Cut Edge

After cutting, gently deburr the cut edge of the metal jacket with a file or deburring tool.

Anti-Short Bushing

Install an anti-short bushing (red head)
inside the cut end of the MC cable to protect the conductors from abrasion against the cut metal jacket.

Careful Insertion

When inserting the cable into the connector, use a twisting motion and apply gentle, even pressure. Avoid forcing the cable.3.

Consider Single-Circuit MC Cable (Potentially Infeasible)

This may not be practical if you've already purchased the MC-PCS Duo cable, but if you're early in the project, consider using separate runs of 12/2 MC cable and 16/2 MC cable. This would significantly reduce the cable diameter at each connection point, making it much easier to fit into the 1/2" knockouts. However, this would double the number of cable runs.4.

Slightly Enlarging the Knockout (Proceed with Extreme Caution)



Last Resort Only!
Only consider this if absolutely necessary and if you can do it without compromising the integrity of the recessed lighting fixture and without voiding its UL listing. Consult the Fixture Manufacturer

Contact the recessed lighting fixture manufacturer
before attempting to enlarge any knockouts. They can advise you on whether it's permissible and, if so, the correct procedure. They may even have specific connector recommendations.

Use a Step Drill Bit

If approved, use a step drill bit (also known as a "unibit") specifically designed for sheet metal. These bits create clean, round holes without burrs or distortion.

Enlarge
Slightly Only

Enlarge the knockout just enough to accommodate the connector
comfortably, without excessive force.

Deburr and Insulate

After enlarging the knockout, deburr the edges and consider using a plastic knockout bushing to protect the cable from abrasion against the sharp metal edge.5.

External Junction Box
If the junction box inside the can light is too small and you cannot enlarge the knockouts on the can, you can mount a 4-square box next to the can and use short whips of THHN wire from the can to the box. This gives you much more space for making connections.

Important Considerations for Luxury Homes in Miami



Humidity and Corrosion

Miami's humid climate can accelerate corrosion. Use connectors that are rated for damp or wet locations, as appropriate.

Aesthetics

In a luxury home, exposed wiring or poorly installed connectors are unacceptable. Ensure that all connections are neat, clean, and hidden from view as much as possible.


Licensed Electrician

Always use a licensed and experienced electrician for electrical work in a luxury home. They will be familiar with local codes, best practices, and high-end installation techniques.*

Inspections

Ensure that all electrical work is inspected by the local authorities to comply with building codes and ensure safety.

Recommendation


Start by thoroughly researching and sourcing compact MC/AC connectors that are explicitly rated for the outer diameter of your 12/2-16/2 MC-PCS Duo cable.
Prioritize connectors with a smooth interior and positive grounding.2. Practice proper cable preparation techniques to ensure clean cuts and prevent damage to the cable jacket.3. Only consider enlarging knockouts as a last resort, and only with the approval and guidance of the fixture manufacturer.4. Engage a qualified and licensed electrician who is experienced with luxury home installations.

By carefully considering these factors and exploring your connector options, you should be able to find a solution that meets the demands of your project in Miami while maintaining code compliance and aesthetic appeal. Good luck! Flag for review

Previous Question Next Question