User: fastline, Location: midwest usa
Asked on: Saturday, October 19, 2024 at 12:29 pm EDT
Answered on: Thursday, March 6, 2025 at 4:09 am EST
Question: Trying to come up with a plan on this. Want it water tight. I'd prefer a PVC gang box but negotiable. Trying to avoid welding. Just for communications cable.In my head, I am envisioning either a radius backed box or adapter device, but I've never seen such a thing.
Okay, let's break down this challenge. You want a waterproof entry/exit point for communication cables, preferably using PVC and avoiding welding. A standard PVC gang box is a good starting point, but the key is sealing it properly to a curved or potentially irregular surface.Here's a plan with options and considerations
Understanding the Challenge:
Curved/Irregular Surface
This is the core problem. Standard flat-backed boxes will leave gaps, inviting water.
Waterproof
This means more than just preventing splashes; you need to withstand rain, hose-downs, etc.
Communication Cable
This usually means low voltage, but consider the cable diameter, number of cables, and required bend radius.
PVC Preference
PVC is good for weather resistance, but remember its limitations.
No Welding
This rules out metal solutions needing welding for a watertight seal.
Plan of Action: Solutions in Order of Preference (Generally)
1. The Best Solution (Potentially More Complex, but Most Reliable): Use a Threaded Fitting with a Custom-Molded Backing/Gasket Components
PVC Threaded Conduit Fitting (90-degree or straight, depending on cable direction)
Select a fitting that matches your conduit/cable entry size (e.g., 3/4" NPT).
Locknut
PVC or Stainless steel. Used to secure the fitting from the inside of the box.
O-Ring or Gasket (Appropriate Material)
Nitrile rubber, EPDM, or silicone. Choose based on environmental factors (temperature, UV exposure). The O-ring diameter should match the fitting's thread size.
Epoxy Putty or Moldable Sealant (Marine Grade)
This is the key to conforming to the curve. 3M Marine Adhesive Sealant Fast Cure 5200 is a popular, strong, and waterproof option. Alternatively, consider a two-part epoxy resin that cures into a solid, durable form.
PVC Gang Box (Optional)
Only if you need the extra protection and organization inside the box. If the threads from the fitting can directly accept your cable gland then you might skip the box.
Cable Gland (Waterproof)
A properly sized gland with a rubber grommet will create the final seal around the cable itself. Choose a gland rated for the cable's diameter. NPT threads are common.
Steps
Prepare the Surface
Clean the curved surface where the fitting will mount. Remove dirt, grease, and loose paint. Lightly sand for better adhesion.2.
Threaded Fitting Assembly
Place the o-ring or gasket on the threaded portion of the fitting.3.
Apply Moldable Sealant/Epoxy
Generously apply the marine-grade sealant or epoxy putty to the back of the threaded fitting where it will contact the curved surface. Completely fill any gaps to ensure a watertight seal. For epoxy resin, follow the product instructions.4.
Mount and Cure
Press the fitting firmly onto the curved surface. Hold it in place (use tape if needed) while the sealant/epoxy cures completely according to the manufacturer's instructions. This is crucial for a strong, waterproof bond.5.
Install the Locknut
From inside the gangbox (if used), secure the threaded fitting with a locknut. Tighten it firmly. Make sure that the o-ring or gasket is seated properly.6.
Install the Cable Gland
Screw the cable gland onto the inside of the threaded fitting, through the gangbox if you used one.7.
Route Cables
Pass the communication cable through the cable gland.8.
Tighten and Test
Tighten the cable gland to compress the rubber grommet around the cable. Test the seal with a gentle spray of water to confirm it's watertight. If necessary, apply more sealant around the edges.
Advantages
Very reliable, durable, and adaptable to most curved surfaces. The threaded fitting and cable gland provide a strong mechanical and environmental seal.
Disadvantages
Requires more steps and careful application of the sealant/epoxy. Curing time can be a factor.
2. Modified PVC Box with Gasket (Good, if the curve isn't too extreme)
Components
PVC Gang Box Closed-Cell Foam Gasket Material (Neoprene, EPDM, or similar) – Thick enough to compress and fill the gap. Stainless Steel Screws/Bolts and Washers Drill and Drill Bits Silicone Sealant (Marine Grade) Cable Glands or Cord Grips for cable entry.
Steps
Create the Gasket
Trace the outline of the gang box onto the gasket material. Cut out the gasket, making it slightly larger than the box outline.2.
Drill Mounting Holes
Position the gang box on the curved surface. Mark and drill mounting holes through both the box and the gasket (simultaneously ensures alignment).3.
Apply Sealant
Apply a generous bead of silicone sealant to the back of the gasket where it will contact the curved surface and to the mounting surface of the PVC box.4.
Mount and Tighten
Align the gang box and gasket with the drilled holes. Secure the box to the curved surface using stainless steel screws/bolts and washers. Tighten evenly and gradually to compress the gasket and conform to the curve. Do not overtighten, which can crack the PVC.5.
Seal the Edges
After tightening, apply another bead of silicone sealant around the perimeter of the box where it meets the curved surface and around the screw heads.6.
Install Cable Glands/Cord Grips
Install cable glands or cord grips into the gang box to provide a waterproof entry for the communication cables.7.
Route Cables and Seal
Pass the cables through the glands/grips, tighten them securely, and apply sealant around the cable entry points if needed.
Advantages
Simpler than the threaded fitting method. The gasket compensates for minor curves.
Disadvantages
Less effective on highly curved surfaces. The gasket may degrade over time, requiring replacement. Relies heavily on the quality of the sealant and gasket material.
3. Pre-Made Waterproof Enclosure (Easiest, but potentially less adaptable)
Components
Pre-made Waterproof Enclosure (PVC or Polycarbonate) with knockouts for cable glands. Look for enclosures specifically rated for outdoor use (NEMA 4X or IP66/67).
Cable Glands or Cord Grips. Stainless Steel Screws/Bolts and Washers. If the enclosure isn't a perfect fit, use a gasket (as described in option 2). Steps
Mount the Enclosure
Position the enclosure on the curved surface. If the enclosure back does not naturally conform to the curve you may need to create a gasket as outlined above. Mark and drill mounting holes.2.
Install Cable Glands
Install cable glands or cord grips into the enclosure's knockouts.3.
Route Cables and Seal
Pass the cables through the glands/grips, tighten them securely.4.
Secure the Enclosure
Secure the enclosure to the curved surface using stainless steel screws/bolts and washers.5.
(Optional) Seal the Edges
If needed, apply a bead of silicone sealant around the perimeter of the enclosure where it meets the curved surface.
Advantages
Very quick and easy to install. Provides a complete, ready-made waterproof solution.
Disadvantages
Might not conform perfectly to the curved surface, requiring a gasket. The size and shape of the enclosure might not be ideal for your application. Can be more expensive than building your own solution.
Important Considerations for All Methods
Material Compatibility
Ensure that all materials (sealants, gaskets, box, screws) are compatible with each other and with the environment (UV exposure, temperature variations).
UV Resistance
Choose UV-resistant PVC or polycarbonate for outdoor applications.
Drainage
Consider drilling a small drain hole at the very bottom of the box (away from cable entries) to allow any accumulated condensation to escape. The hole should be small enough to prevent insects from entering.
Cable Bend Radius
Maintain the minimum bend radius for your communication cables to avoid signal degradation.
Grounding/Bonding
If your communication cables require grounding, ensure a proper grounding path is established within the box.
Why I Recommend the Threaded Fitting Method First:
While it may seem more complex at first, the threaded fitting with marine epoxy and cable gland approach gives you the most control over the seal and the most flexibility in adapting to the curved surface. The mechanical connection of the threaded fitting, combined with the custom-molded epoxy backing, creates a very robust and watertight bond.Remember to thoroughly clean and prepare all surfaces before applying sealants or adhesives. Patience and attention to detail are key to achieving a truly waterproof result. Flag for review