Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: What’s the best HVAC Building Automation & Control Wiring used for terminating control wiring from 24volts to 600v plus rated wiring?

User: Themaintenancenetwork, Location: Dallas, Texas

Asked on: Monday, October 21, 2024 at 5:29 am EDT
Answered on: Thursday, March 6, 2025 at 4:12 am EST

Question: Can you make a post about the best stranded wiring with insulation type for building automation and controls for hvac & refrigeration? 600V plus wire types that are good for vfd’s and more.Very interested to see what you post!

Okay, here's a post discussing stranded wiring and insulation types suitable for building automation, HVAC, and refrigeration controls, with a focus on 600V-rated options and wiring for VFDs

Wiring Up Success: Choosing the Right Wire for Building Automation, HVAC, and Refrigeration Controls

Building automation systems (BAS), HVAC, and refrigeration controls rely on robust and reliable wiring. The choice of wire impacts system performance, longevity, and, most importantly, safety. This post explores the best stranded wiring and insulation types for these critical applications, including high-voltage (600V+) options and considerations for Variable Frequency Drives (VFDs).

Why Stranded Wiring?

For control applications, stranded wire is almost always preferred over solid wire for several key reasons: Flexibility

Stranded wire is significantly more flexible, making it easier to route through tight spaces, conduit, and connect to terminals, especially in dynamic or vibrating environments. This reduces the risk of damage during installation and operation.


Vibration Resistance

HVAC equipment and refrigeration systems often vibrate. Stranded wire is better able to withstand vibration without fatiguing and breaking, leading to more reliable connections.

Bend Radius

Stranded wire has a tighter bend radius, important when working in crowded control panels.

Key Insulation Types for Control Wiring

Here's a breakdown of common insulation types and their suitability:


THHN/THWN-2 (Thermoplastic High Heat-resistant Nylon-coated/Thermoplastic Heat and Water-resistant Nylon-coated)



Description

A very common and versatile choice. THHN is primarily for dry locations, while THWN-2 is rated for wet and dry locations. Both have a nylon jacket that provides excellent abrasion resistance.


Voltage Rating

Typically 600V.

Temperature Rating

90°C (194°F) in dry locations, 75°C (167°F) in wet locations for THWN-2.


Pros

Cost-effective, widely available, good temperature rating, abrasion-resistant, suitable for conduit.

Cons

Can be stiffer than some other options.


Use Cases

General control wiring, power circuits (with appropriate gauge), lighting circuits.

MTW (Machine Tool Wire)



Description

Designed for use in machine tools and industrial equipment. MTW is highly flexible and oil-resistant.

Voltage Rating

Typically 600V.


Temperature Rating

90°C (194°F) in dry locations, 60°C (140°F) in wet locations.

Pros

Extremely flexible, excellent oil resistance, good for tight spaces.


Cons

May be slightly more expensive than THHN/THWN.

Use Cases

Control panels, wiring inside equipment, applications where oil or other chemicals are present.


XHHW-2 (Cross-linked Polyethylene High Heat-resistant Water-resistant)



Description

Offers superior moisture and heat resistance compared to THHN/THWN. Uses a cross-linked polyethylene insulation which is very durable.


Voltage Rating

Typically 600V.

Temperature Rating

90°C (194°F) in wet and dry locations.


Pros

Excellent moisture resistance, high temperature rating, durable insulation.

Cons

May be more expensive than THHN/THWN.


Use Cases

Underground installations, direct burial (check local codes), applications where moisture is a concern.

SIS (Switchboard Wiring)



Description

Specifically designed for use in switchboards and control panels. Offers good flexibility and flame retardance.

Voltage Rating

Typically 600V.


Temperature Rating

90°C (194°F).

Pros

Flexible, flame retardant.


Cons

May not be as readily available as other types.

Use Cases

Internal wiring of switchboards and control panels.


TFFN (Thermoplastic Flexible Fixture Nylon)



Description

A highly flexible and small-diameter wire, often used for low-voltage control circuits and instrumentation.


Voltage Rating

600V

Temperature Rating

90°C (194°F) in dry locations.


Pros

Very flexible, small diameter.

Cons

Not as durable as some other types.


Use Cases

Control panels and other devices requiring small diameter wires.

Wiring Considerations for Variable Frequency Drives (VFDs)

VFDs introduce unique challenges due to the high-frequency switching and potential for electromagnetic interference (EMI) and voltage spikes. Proper wiring is crucial for reliable VFD operation and minimizing noise.

VFD Cable (Shielded Power Cable)



Description

Specifically designed for VFD applications. Features a symmetrical grounding system and shielding to minimize EMI and voltage reflections. Often uses XLPE insulation for high-temperature performance.

Voltage Rating

Typically 600V or 1000V.


Temperature Rating

Often 90°C (194°F) or higher.

Pros

Minimizes EMI, reduces voltage reflections, provides a dedicated grounding path, durable insulation.


Cons

More expensive than standard wiring.

Use Cases

Wiring between the VFD and the motor.
Essential for VFD applications, especially with long cable runs.

Grounding is Critical

A low-impedance ground path is essential for VFD installations. Use a dedicated grounding conductor (green or green with yellow stripe) sized appropriately for the VFD.

Keep Wires Separate

Physically separate VFD power cables from control wiring and other sensitive circuits to minimize interference. Use separate conduits if possible.


Terminate Shields Properly

Ensure the shield of VFD cable is properly terminated at both the VFD and the motor ends, following the manufacturer's instructions. This provides the best protection against EMI.

Additional Considerations



Wire Gauge

Select the appropriate wire gauge based on the current carrying capacity required by the circuit and the allowable voltage drop. Consult the National Electrical Code (NEC) for guidance.


Color Coding

Use consistent color coding for wiring to simplify troubleshooting and maintenance.

Local Codes

Always adhere to local electrical codes and regulations.


Manufacturer's Specifications

Consult the equipment manufacturer's recommendations for wiring types and sizes.

Environmental Factors

Consider the environmental conditions (temperature, humidity, chemicals) when selecting wire insulation. For example, in a corrosive environment, consider using wire with insulation rated for chemical resistance.


Ampacity

Determine the continuous current and overload capacity required for the specific application. Select wire with the appropriate ampacity rating based on the NEC or relevant standards.

Flexibility

If frequent movement or flexing is expected, choose highly flexible stranded conductors with appropriate insulation designed for flex-resistant applications.


Conductor Material

Copper is the standard choice for most electrical wiring due to its excellent conductivity and corrosion resistance. Aluminum conductors can be used in larger sizes with appropriate termination techniques, but are less common for control wiring.

In Summary

Choosing the right wire for building automation, HVAC, and refrigeration controls is essential for system reliability, safety, and performance. While THHN/THWN-2 is a common and cost-effective choice for general control wiring, MTW offers excellent flexibility and oil resistance, and XHHW-2 provides superior moisture resistance. For VFD applications, shielded VFD cable is highly recommended to minimize EMI and ensure proper grounding. Always consult local codes and manufacturer's specifications to ensure compliance and optimal system performance.

Disclaimer:
This post is for informational purposes only and should not be considered a substitute for professional electrical engineering advice. Always consult with a qualified electrician or engineer for specific wiring recommendations for your application. Flag for review

Previous Question Next Question