Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Solid wire being used for solar systems

User: JuanC, Location: Maryland

Asked on: Tuesday, October 22, 2024 at 5:01 pm EDT
Answered on: Thursday, March 6, 2025 at 4:17 am EST

Question: I have only seen stranded wire being used to wire up solar systems (residential) but just today I was thinking how come they don’t use solid wire? Is it a code violation? Is stranded wire better to use for DC voltage? I’d like to get some thoughts on this mainly because my knowledge on solar systems is limited.

You've hit on a good question! While stranded wire is the de facto standard for residential solar installations, solid wire is not necessarily a code violation, but there are very good reasons why it's rarely used. Here's a breakdown

Why Stranded Wire is Preferred in Solar Installations (and most wiring, really):
Flexibility

This is the biggest reason. Solar panels are often mounted on roofs, and inverters are usually located in basements or garages. This means the wiring runs will involve bending, twisting, and maneuvering through tight spaces. Stranded wire is
much more flexible than solid wire, making it easier to install and less prone to damage from flexing. Solid wire can easily kink or break if bent too sharply or repeatedly.

Durability Under Vibration and Movement

Solar panels are exposed to wind and other environmental factors that can cause vibration and minor movement. Stranded wire is better at withstanding these vibrations without fatiguing and breaking. Solid wire is more rigid and more likely to break under continuous vibration.

Connections

While you
can terminate solid wire in certain connectors, stranded wire generally makes better, more reliable connections, especially in screw-type terminals or compression connectors. The strands conform better to the shape of the terminal, providing a larger contact area and a more secure grip.

Code Considerations

While I wouldn’t say solid core is a code violation in itself (some local jurisdictions may have restrictions), the flexibility required for the runs and panel locations makes stranded wires easier to comply with codes when it comes to things like securing the wire to the structure properly and ensuring no bends are too sharp.

Heat Dissipation

Stranded wire has slightly more surface area than solid wire of the same gauge, which
could help with heat dissipation. This is a minor factor, but it can be a consideration in high-current DC systems.

Why Solid Wire is Rarely Used (but
could theoretically be)



Lack of Flexibility

As discussed, this is the primary issue. Residential solar installations are rarely straight, easy runs.

Breakage

Solid wire is more susceptible to breakage if bent or stressed repeatedly.


Difficult Terminations

Terminating solid wire can be more difficult in some types of connectors, especially with larger gauges. It requires more precision and can be more prone to loosening over time.

DC Voltage Considerations

While stranded wire is not specifically better for DC voltage than solid wire in terms of conductivity, the points above (especially durability and connection reliability) are important considerations for any electrical system, regardless of voltage type. The fact that many solar systems involve high-current DC circuits makes reliable connections even more critical.

In summary:


Solid wire could theoretically be used for some straight, short runs in a solar system, but the advantages of stranded wire (flexibility, durability, connection reliability) far outweigh any potential cost savings. Stranded wire is the much safer and more practical choice for nearly all residential solar installations. It's an engineering choice based on the specific requirements of the application. Flag for review

Previous Question Next Question