Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Booster for signaling circuit FA

User: JJWalecka, Location: New England

Asked on: Wednesday, October 23, 2024 at 1:23 pm EDT
Answered on: Thursday, March 6, 2025 at 4:19 am EST

Question: Was told "We have to add a booster for one strobe because they can’t provide shop drawings for existing system".Im unfamiliar with fire alarm systems.Can someone point me in the right direction on what questions I should be asking

Okay, let's break down this statement and figure out what questions you should be asking. The situation involves a fire alarm system upgrade or modification where existing shop drawings are missing for the existing strobe devices.

Understanding the Statement "We have to add a booster..." A booster (sometimes called a power booster or amplifier) in a fire alarm system increases the power output of the fire alarm control panel (FACP) or a circuit. This is necessary when the existing wiring or power supply cannot adequately support the addition of new devices or because the existing devices are operating at too low of a voltage to deliver the required light output. "...for one strobe..." A strobe is a visual notification appliance that emits bright flashes of light. These are used to alert individuals with hearing impairments or in environments with high noise levels. It is a required notification device under the ADA. "...because they can't provide shop drawings for existing system." Shop drawings are detailed diagrams and specifications of the system components, wiring, and connections. Without them, it's difficult to determine the existing system's capacity, wiring configuration, and compatibility. This means that the installer has no way to understand what to expect in terms of power draw on the existing circuit. This is a violation of NFPA 72.

Why is this a problem?

Without shop drawings, the installer may not be able to determine the circuit's:
Maximum Current Draw: All fire alarm circuits are designed to handle a certain amount of current. Without knowing the existing load, adding more strobes could overload the circuit, leading to malfunction or failure. Wire Gauge: The wire gauge used in the existing system must be adequate to handle the additional current draw. Undersized wiring could cause voltage drops and prevent the strobes from operating correctly. Power Supply Capacity: The fire alarm control panel (FACP) has a limited power supply. Without shop drawings, it's difficult to determine if the FACP can handle the additional load of the new strobes. Compatibility: Without shop drawings, it can be difficult to determine if the new strobes are compatible with the existing system in terms of voltage, signaling protocol, and supervision requirements.

Questions to Ask

Here's a breakdown of questions you should be asking, categorized for clarity

1. Justification for Booster:

"What is the current draw of the new strobe, and how does that compare to the existing circuit's capacity?" This gets to the core of why a booster is being considered. You want to understand the math behind the decision. "Have you tested the voltage drop on the existing circuit with the new strobe connected (even temporarily)? What was the voltage drop?" A voltage drop could indicate the need for a booster. If the voltage available to the strobe is less than what's required, the strobe won't operate properly. "Is the power booster rated for fire alarm use and listed to UL 864 or equivalent standard?" It's critical that any booster used is specifically designed and certified for fire alarm applications. "Where will the booster be located, and what are the wiring requirements (power, signal, etc.)?" You need to understand the physical installation of the booster. "How will the booster be supervised by the fire alarm panel?" All fire alarm devices need to be supervised for integrity (e.g., open circuit, short circuit). The booster needs to be properly monitored.2. Alternatives to a Booster (and Why They Weren't Chosen)



"What other options were considered besides a booster? For example, could we use a lower current strobe?"
Perhaps a more efficient strobe model could reduce the load. "Could we replace the existing wire run with a larger gauge wire to accommodate the additional load?" This might be a viable option if the existing wire is the limiting factor. "Is it possible to trace the existing wiring to identify the circuit's origin and capacity? Sometimes, even without shop drawings, a skilled technician can trace the wiring back to the panel and determine its specifications. "Could we install a new dedicated circuit for the strobe directly from the fire alarm control panel or a remote power supply?" This isolates the new strobe from the existing system.3. Impact on the Existing System



"How does adding this booster affect the overall fire alarm system's functionality and reliability?"
You want to ensure that the booster doesn't negatively impact other parts of the system. "Will the addition of the booster require any reprogramming of the fire alarm control panel?" "Will the fire alarm control panel be able to provide sufficient power to this circuit, even with the booster?" You're looking for confirmation that the FACP won't be overloaded. "Who will be responsible for testing and commissioning the entire system, including the new strobe and booster, after installation?"4. Documentation & Compliance



"What documentation will be provided for the booster installation, including wiring diagrams, specifications, and test results?"
You need proper documentation for future maintenance and troubleshooting. "How will the installation comply with all applicable codes and standards (e.g., NFPA 72, local building codes, ADA)?" Compliance is paramount. "Will you provide updated shop drawings reflecting the system modifications, including the booster?" Even without original drawings, you need as-built drawings that reflect the current state. "What is the light output of the strobe and is it compliant with the building code and ADA?" Ensure you are adding the correct device.5. Understanding the lack of Shop Drawings "What attempts were made to locate the original shop drawings?" - Ask who was contacted (building owner, previous installers, etc.)Key Considerations



Fire Alarm Expertise

Fire alarm systems are complex and regulated. Ensure the installer is a qualified and licensed fire alarm technician.

Safety

Improperly installed fire alarm components can compromise the safety of the building occupants.


Compliance

Non-compliance with fire codes can result in fines and legal issues.*

AHJ Approval:
Depending on your jurisdiction, the Authority Having Jurisdiction (AHJ, often the fire marshal) may need to approve the modifications.By asking these questions, you'll gain a better understanding of the situation, the proposed solution, and the potential risks and implications. This will help you make informed decisions and ensure that the fire alarm system remains reliable and compliant. Flag for review

Previous Question Next Question