Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: 15 amp three pole breaker 480

User: JJWalecka, Location: New England

Asked on: Thursday, October 24, 2024 at 5:49 pm EDT
Answered on: Thursday, March 6, 2025 at 4:23 am EST

Question: Can anyone point me in the right direction, please. Im going to call Eaton and ask if the information provided in the attached image is enough to tell me the type of 15 amp 3 pole 480v breaker

Let's analyze the information in the image and discuss what you should ask Eaton.

What the Image Likely Shows

The image likely shows a label or nameplate from the breaker itself. Key elements we need to identify are:

Manufacturer

Eaton is good, you already know that.


Amperage Rating

You mention 15 amp. That's crucial.

Voltage Rating

480V is important.


Number of Poles

You mention 3-pole.

Interrupting Capacity

This is a crucial safety factor. It's usually expressed in kA (kilo-Amps) or AIC (Ampere Interrupting Capacity). Look for numbers like 10kA, 14kA, 18kA, 22kA, 65kA, or similar. Higher AIC is always preferred (within reasonable bounds, as cost increases with AIC).


Trip Unit Type

This is the most important piece of information the image is likely missing. This is often a code or series number. Examples might be "EHD," "GHB," "FHL," "CGB," "Series C," etc.

Catalog Number

This would give the most explicit information

Why the Trip Unit Type is Important

The "trip unit" determines how the breaker will respond to overcurrent conditions. Different trip units have different time-current characteristics. They dictate how quickly the breaker will trip at different levels of overcurrent. This is
critical for protecting the circuit and equipment.

What to Tell Eaton

When you call Eaton, provide
all the information you can read directly from the label, including any other numbers or codes present. Specifically, tell them:1. "I have an Eaton 3-pole, 15 amp, 480V breaker."2. State anything else on the label (catalog # or trip unit type are the most important)3. "I'm trying to identify the exact breaker model so I can find its specifications and ensure it's the correct type for my application."4. "I'm especially looking for the trip unit type or a full part number."5. "Can you tell me the interrupting capacity (AIC) of this breaker?"6. "Can you provide a link to the breaker's datasheet or specifications?"

What Questions to Ask Eaton, if not obvious from the datasheet



What is the trip curve for this breaker?
(They might not give you the full curve but can hopefully describe the general trip characteristics: "Fast trip," "Inverse time," "Instantaneous trip," etc.) Is this breaker suitable for [your application]? Briefly describe what you're using it for (e.g., "motor protection," "general lighting circuit," etc.). While they can't give you specific design advice, they can often flag if it's clearly unsuitable.

Why You Need the Exact Model



Replacement

If you need to replace the breaker, you need the correct type.

Safety

Using the wrong breaker can be dangerous and violate electrical codes.


Coordination

In a larger electrical system, breakers need to be coordinated to ensure that the breaker closest to a fault trips first, minimizing disruption. This requires knowing the trip curves of all breakers in the system.*

Compliance:
Electrical inspectors will want to see that the breakers are appropriately sized and rated for the application.Good luck! Providing Eaton with as much information as possible from the label will help them identify the breaker quickly and accurately. Flag for review

Previous Question Next Question