Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Main breaker arc fault GFCI

User: reyamkram, Location: Hanover park, il

Asked on: Saturday, October 26, 2024 at 12:04 pm EDT
Answered on: Thursday, March 6, 2025 at 4:26 am EST

Question: I do believe I can use a main Ark fault GFI breaker to cover the whole apartment instead of individual ones and it's 60 amp sub panel her two bedroom apartment am I right am I assumptions any more information is truly appreciated thank you

Okay, let's break down the situation and clarify the requirements for AFCI and GFCI protection in your apartment. It's crucial to understand this information to ensure electrical safety and code compliance.Understanding AFCI and GFCI Protection



AFCI (Arc Fault Circuit Interrupter)

AFCI breakers are designed to detect dangerous electrical arcs (sparking) in wiring. These arcs are a major cause of electrical fires. They are designed to
prevent fires.

GFCI (Ground Fault Circuit Interrupter)

GFCI breakers (or receptacles) protect against electrical shock. They detect current leakage to ground, which can happen when someone touches a live wire or a faulty appliance. They are designed to prevent shocks.

Code Requirements (NEC - National Electrical Code)

The NEC has specific requirements for AFCI and GFCI protection, and these requirements have evolved over time. The exact requirements depend on which version of the NEC your local jurisdiction has adopted. However, generally speaking:

AFCI Protection

AFCI protection is typically required for

all branch circuits that supply outlets in dwelling units (residential properties)
, including bedrooms, living rooms, family rooms, dens, recreation rooms, closets, hallways, and similar areas. It's intended to protect the entire circuit. GFCI Protection

GFCI protection is required in areas where there is a high risk of contact with water or ground. This typically includes: Bathrooms Kitchens (countertop receptacles) Garages Unfinished basements Outdoor receptacles Any location where there is a sink (e.g., utility sink)

Your Situation and Considerations


60 Amp Subpanel

You mention a 60 amp subpanel in your two-bedroom apartment. This subpanel likely feeds multiple branch circuits, each with its own breaker.2.

Using a Single AFCI/GFCI Breaker for the Entire Apartment



This is likely NOT compliant with the NEC and is generally not a good idea.
Here's why: AFCI Requirements

The NEC typically requires AFCI protection for
each branch circuit serving living areas. A single AFCI breaker on the subpanel feed would not provide this protection for each circuit individually. It would be like using one big band-aid for multiple injuries.

GFCI Requirements

While it's technically possible to use a GFCI breaker on the subpanel feed to protect some areas, it's usually more practical and safer to use GFCI protection at the point of use (e.g., GFCI receptacles in the bathroom and kitchen). If you have a GFCI breaker on the subpanel and a ground fault occurs on any circuit, the entire subpanel will trip, shutting off power to the whole apartment. This is highly inconvenient and makes it difficult to isolate the fault.

Overload Protection

A 60 amp breaker on the subpanel is designed to protect the
panel itself from being overloaded. It does not protect the individual circuits from overloads. For example, you could overload a 15 amp circuit in your bedroom, and the 60 amp breaker wouldn't trip until the entire panel was overloaded. Individual circuit breakers protect the wiring and appliances on each specific circuit.

Selective Coordination

Using a single AFCI/GFCI breaker defeats the purpose of selective coordination. Selective coordination is the practice of ensuring that only the smallest possible area is affected by a fault. With a single breaker, a small fault anywhere in the apartment trips the entire apartment.

Troubleshooting

If the single AFCI/GFCI breaker trips, you won't know which circuit caused the problem, making troubleshooting very difficult.

Recommendations


Consult a Qualified Electrician

The
best course of action is to consult a licensed and qualified electrician in your area. They can: Assess your existing electrical system. Determine the specific AFCI and GFCI requirements based on your local code. Install the correct type of protection in the proper locations.* Ensure that the installation is safe and code-compliant.2.

Individual AFCI and GFCI Protection

Generally, the correct approach is to use individual AFCI breakers for circuits serving living areas and GFCI protection (either breakers or receptacles) in areas with a high risk of water contact.3.

Consider Combination AFCI/GFCI Breakers

Combination AFCI/GFCI breakers are available. These breakers provide both arc fault and ground fault protection in a single unit. They can be a good option for certain circuits.

In summary, while technically possible in some very limited situations, using a single AFCI/GFCI breaker for the entire apartment is generally not compliant with the NEC, is less safe, and is much less practical than using individual AFCI and GFCI protection for the appropriate circuits. Hire a qualified electrician to assess your needs and ensure a safe and code-compliant installation.
Flag for review

Previous Question Next Question