Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: I do install outlets and switches for a living living

User: sylveme, Location: San diego

Asked on: Saturday, October 26, 2024 at 9:47 pm EDT
Answered on: Thursday, March 6, 2025 at 4:27 am EST

Question: Dear action Dave, I can appreciate your position however I do install these for a living. My name is Sylvia Leon I own Handy Mandy SD a handyman business in La Mesa California and I've owned it for 6 years now however I've been doing handyman work for 20 plus years. I've probably installed more than 100 outlets and switches in my lifetime. I work with electricity in homes very often and I am extremely careful and so have never been shocked harmed and none of my work has ever been recalled because of some problem. When I discovered I had aluminum wiring I learned everything I could so that I could mitigate the chance of a fire happening in my home. But nowhere does it tell me what I should do in this situation should I just leave well enough alone or should I switch out so that I have aluminum switches connected to aluminum wire. Tell you the truth I think they would both work but I was just wondering if somebody could push me in one direction or the other and give me a good reason why I should go that in that direction. That's all I wanted to know.

Dear Sylvia Leon,Thank you for reaching out and providing your impressive background and experience. It's clear you're a conscientious professional and I completely understand your desire for a definitive answer given your expertise.You're right, the situation of existing aluminum wiring in your own home with aluminum-rated outlets and switches is a gray area. Many resources focus on mitigating the dangers of aluminum wiring with copper (the COPALUM process, pigtailing with copper, etc.) but rarely address this specific scenario.

Here's my perspective, based on a cautious approach given the inherent risks associated with aluminum wiring, even when using compatible components



While technically, aluminum-rated devices connected to aluminum wiring might work without immediate issues, I would lean strongly towards replacing them with CO/ALR rated devices that are also appropriately sized for your current wiring gauge and local building codes.
Here's why



Improved Connections & Reduced Risk of Oxidation

Even with aluminum-rated devices, oxidation remains a concern. Modern CO/ALR (Copper/Aluminum Revised) outlets and switches are designed to better resist corrosion at the connection point. They have a different alloy that is much less susceptible to oxidization than the older Aluminum devices. This significantly reduces the risk of loose connections and subsequent overheating. Even slight resistance increases due to oxidation can lead to significant heat buildup. This can damage the device, the wiring, or lead to a fire.


Peace of Mind

Knowing you've taken the extra step to use the most advanced and safest devices available will provide significant peace of mind, especially considering it's your own home and family.

Future-Proofing

While aluminum wiring is acceptable for now, future electrical work or renovations might be easier and safer with upgraded CO/ALR rated devices. You also want to make sure that you are providing an electrical safety in your home that meets or exceeds current home inspection standards.

Things to Consider



Correct Device Rating

Crucially, ensure any replacement aluminum devices (like CO/ALR outlets or switches) are properly rated for use with aluminum wiring and sized for the appropriate amperage. Consult your local codes and electrical inspector to confirm compliance.



Proper Installation is Key

Even the best devices won't prevent problems if not installed correctly. Use anti-oxidant paste (like Noalox or similar) specifically designed for aluminum connections when installing the new devices. Also, tighten the screws appropriately. Over-tightening or under-tightening can both cause issues.


Professional Inspection

After any electrical work, and periodically thereafter, it's wise to have a qualified electrician inspect your wiring and connections. They can identify any potential problems early.

In Summary:While leaving existing aluminum-to-aluminum connections alone might be acceptable, I believe the potential benefits of using CO/ALR rated outlets and switches, combined with proper installation and maintenance, outweigh the costs and risks. It's a worthwhile investment in your home's safety and your peace of mind.Given your extensive experience, you are in the best position to assess the specific situation in your home and make an informed decision. However, I would strongly recommend discussing this with a licensed electrical inspector in La Mesa. Their local expertise and knowledge of current codes will be invaluable.Thank you for your insightful question, Sylvia. I hope this helps!Sincerely,Action Dave Flag for review

Previous Question Next Question