Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Is it acceptable to run tray cable in flex conduit?

User: cgamad550, Location: United States

Asked on: Monday, October 28, 2024 at 11:24 am EDT
Answered on: Thursday, March 6, 2025 at 4:29 am EST

Question: Hi guys I'm running a #4 trey cable to supply a sub panel is it acceptable by code to run this in 2 inch flex conduit?? Thanks in advance

Okay, let's break down whether running a #4 TREX (Type TC-ER) cable in 2-inch flexible conduit is generally acceptable according to the National Electrical Code (NEC).

Understanding the Components #4 TREX Cable (Type TC-ER)

This is a multi-conductor cable often used for power and control circuits. "TC-ER" means "Tray Cable - Exposed Run." The "Exposed Run" rating is important.


Flexible Conduit (Likely FMC or LFMC)

Flexible Metal Conduit (FMC) or Liquidtight Flexible Metal Conduit (LFMC) are common types of flexible conduit used for protection and routing of cables.

Subpanel

A secondary electrical panel fed from the main service panel.

NEC Considerations and General Acceptability


Here's a breakdown of the key NEC considerations and whether this is
generally acceptable. Remember: Always consult the current, adopted version of the NEC in your jurisdiction and consult with a qualified electrical inspector.1. Cable Type and Use (NEC 336, 392)

TREX cable (Type TC-ER) is designed for cable tray installations and can be used for exposed runs (without conduit) between the tray and the equipment. The "ER" (Exposed Run) rating is crucial. This means you might not need conduit for the entire run. NEC 336 covers TC cable. Check Article 336 for specific restrictions on the use of TC cable. NEC Article 392 covers cable trays.2.

Protection from Physical Damage (NEC 300.4)

If the TREX cable is subject to physical damage (e.g., in an area where it could be hit by vehicles, equipment, or subject to abrasion), protection is required. Flexible conduit is a common method of providing this protection. If the TREX cable is installed in a location where it could be exposed to physical damage, it needs to be protected. Flexible conduit is a viable method.3.

Conduit Fill (NEC Chapter 9, Table 1)

This is critical. You must ensure that the #4 TREX cable fits within the 2-inch flexible conduit according to the NEC's fill requirements. Chapter 9 provides tables and examples for calculating conduit fill. You'll need to know the outer diameter of your specific #4 TREX cable. This information will be on the cable's jacket or available from the manufacturer. Flexible metal conduit (FMC) and liquidtight flexible metal conduit (LFMC) have different fill rules.

Important

Using the wrong conduit size is a code violation and can lead to overheating and other problems.4.

Ampacity (NEC 310)

The ampacity of the #4 conductors within the TREX cable must be adequate for the load served by the subpanel. The wire needs to be sized according to the proper ampacity. Consider derating factors for ambient temperature or the number of current-carrying conductors in a raceway. Make sure the terminations are appropriately sized for the conductors.5.

Grounding (NEC 250)

You must have a proper equipment grounding conductor (EGC) run with the circuit to the subpanel. The TREX cable should have an appropriately sized grounding conductor. Ensure proper bonding of the conduit and enclosures.6.

Support (NEC 300.11, 300.12)

Conduit must be properly supported according to NEC requirements. Cables must be supported if required.7.

Bending Radius (NEC 348.24)
FMC has minimum bending radius requirements that need to be followed.

In Summary: Is it Acceptable? Potentially, yes. Running #4 TREX cable in 2-inch flexible conduit could be acceptable if you meet all the NEC requirements, including conduit fill, ampacity, grounding, and physical protection. Crucial Steps



Determine the Outer Diameter

Get the exact outer diameter of your #4 TREX cable.


Calculate Conduit Fill

Use NEC Chapter 9 to verify that the cable fits in the 2-inch flexible conduit (for the specific type of flexible conduit you are using).

Verify Ampacity

Ensure the conductors are adequately sized for the load and that you've accounted for any necessary derating.


Grounding

Ensure proper grounding and bonding.

Local Inspection

Consult with your local electrical inspector
before you start the installation to ensure compliance with local codes and interpretations.

Consider Alternatives

If the cable is rated for exposed runs, you might only need the conduit in specific areas where physical protection is required.

Important Considerations and Cautions
Local Amendments

Many jurisdictions amend the NEC. Be aware of any local changes to the electrical code.


Qualified Electrician

If you are not a qualified electrician, it is strongly recommended that you hire one to perform this work. Electrical work can be dangerous, and incorrect wiring can create fire hazards or electrocution risks.*

Inspection

Have the work inspected by a qualified electrical inspector.

Disclaimer:
I am an AI chatbot and cannot provide electrical code advice. This information is for general guidance only. Always consult the NEC and a qualified electrician for specific code requirements and safe installation practices. Flag for review

Previous Question Next Question