Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Really?

User: hillbilly1, Location: North Georgia mountains

Asked on: Monday, October 28, 2024 at 3:45 pm EDT
Answered on: Thursday, March 6, 2025 at 4:31 am EST

Question: One of my industrial customer’s son just got married a couple of months ago, and has a small cabin they live in right now. His dad said there was an old house nearby he wanted to remodel for them, could I put the service back up? LOL!

This sounds like a great opportunity to potentially help your customer and their son! Here's how you might approach this

First, Verify the Situation and Express Interest:
"That sounds like a really nice project! So, to be clear, the son and his wife are in a small cabin currently, and your plan is to remodel an older house on the property for them to move into?" This confirms the details. "Putting the service back up would definitely be within my area of expertise. I'd be happy to take a look at it for you." Express your willingness to help.

Next, Gather Key Information (Crucial for a Safe and Legal Service Re-Establishment)

Before you commit or provide any kind of estimate, you need this information:

Location and Property Address

Required for permits, code compliance checks, and understanding local requirements.


Existing Service Information (if any)



Was there a service there before?
If so, what was the amperage (e.g., 100 amp, 200 amp)? Knowing the past capacity is helpful, but don't assume you can reuse it. Where was the service located? Where was the meter, the disconnect, the panel? Is the old service equipment still present? Even if it looks intact, it likely needs replacement due to age and code updates. Utility Company (Power Company)

Who provides electricity in that area? You must coordinate with them. They'll likely have specific requirements for the service entrance, meter location, disconnect, and grounding.

Planned Electrical Load



What's the intended use of the house?
(e.g., primary residence, occasional use). What appliances will be used? (e.g., electric range, electric dryer, central AC, electric water heater, hot tub, etc.) This is critical for calculating the load and determining the appropriate service size. Square footage of the house

A larger house typically needs a larger service.

Any future plans that might increase electrical demand?
(e.g., adding an electric vehicle charger, a workshop). Condition of the Existing Wiring (If Any)

Is there any existing wiring in the old house? What type is it? (e.g., knob and tube, cloth-covered, Romex). What is its condition? Old wiring often needs to be replaced for safety and code compliance. Do not assume it's safe to reuse.



Permitting and Inspections



Who is the local authority having jurisdiction (AHJ)? (City, county, etc.)


What permits are required for this type of work?

What inspections will be required? (e.g., rough-in, final).


Timeline

When does the customer want this completed?

Explain Code Requirements and Safety Considerations



"Electrical codes have likely changed significantly since the original house was wired. We'll need to ensure everything meets current safety standards." This sets expectations that it's not just a simple reconnection.
"Safety is my top priority. I'll make sure the service is properly grounded and protected to prevent electrical hazards." "Permitting and inspections are essential to ensure the work is done correctly and meets code requirements."

Offer a Site Visit/Inspection



"The best way for me to give you an accurate estimate is to do a site visit and assess the existing conditions. Would you be available for me to come out and take a look next week?" This is crucial. You cannot accurately quote this without seeing the property.

Important Considerations and Warnings



Very Old Wiring

If the house has very old wiring (especially knob-and-tube or cloth-covered), you should strongly recommend a complete rewire. These types of wiring are often unsafe and cannot handle modern electrical loads.


Panel Replacement

The electrical panel almost certainly needs to be replaced. Old panels may be outdated, undersized, or have components that are no longer reliable.

Grounding

Modern grounding requirements are critical for safety. Make sure the grounding system is properly installed according to code.


Coordination with the Utility Company

The utility company is responsible for the service drop (the wires from the pole to the house) and the meter. You must coordinate with them to ensure the service entrance and meter location meet their requirements.

Don't Underestimate the Cost

Remodeling electrical systems, especially in older homes, can be more expensive than expected due to unforeseen issues and the need to bring everything up to code. Be upfront about potential costs and the importance of doing the job right.


Liability

Make sure your insurance covers this type of work.

Written Estimate/Contract

Once you've assessed the site and determined the scope of work, provide the customer with a detailed written estimate or contract that includes:
Scope of work (what you will and will not do) Materials list Labor costs Permit fees Inspection fees Payment schedule Warranty information

In summary: Express interest, gather thorough information, emphasize safety and code compliance, offer a site visit, and provide a detailed written estimate. Doing your due diligence upfront will protect you and your customer. Good luck! Flag for review

Previous Question Next Question