Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Cement block wall with 7/8 metal furring straps secured to it

User: JJWalecka, Location: New England

Asked on: Tuesday, October 29, 2024 at 12:09 pm EDT
Answered on: Thursday, March 6, 2025 at 4:34 am EST

Question: I have to dress an MC cable down a block wall through a 7/8 furring strip and to an outlet. Will a nail plate at where the MC passes through the stud be adequate....or should the MC change to pipe coming down the block wall?Thanks for your thoughts

Here's a breakdown of considerations for running MC cable down a block wall through furring strips to an outlet

Understanding the Requirements:
MC Cable Protection

MC cable needs protection from physical damage. This is especially true where it's exposed or could be subject to impact (e.g., behind drywall, near foot traffic).


NEC (National Electrical Code)

The NEC guides how electrical work is performed. Local jurisdictions might have additional requirements.

Securing and Supporting

MC cable must be properly secured and supported at specific intervals (usually every few feet) and within a certain distance of boxes and fittings.


Penetration Protection

When cables or conduits pass through framing members (like studs or furring strips), they need protection from nails or screws that might be driven into those members later.

Options and Considerations


MC Cable with Nail Plate



Pros

Relatively straightforward and inexpensive.


Cons

The 7/8" furring strip is thin. A nail plate may not provide adequate protection if someone drives a long screw. If the MC cable will be directly against the block wall, the nail plate needs to provide sufficient stand-off to avoid friction against the block wall.

Code Compliance

This
can be compliant if the nail plate is securely installed and offers substantial protection. Consider using a thicker plate.

Installation

Secure the nail plate tightly to the furring strip. Ensure the plate completely covers the area where the MC cable passes through. Consider a second nail plate on the outside face of the furring strip for added protection.2.

Transition to Rigid Metal Conduit (RMC) or Intermediate Metal Conduit (IMC)



Pros

Offers superior physical protection, especially where the MC cable is exposed. Complies with code requirements for physical protection in hazardous location.

Cons

More expensive, requires cutting and threading conduit (or using fittings), and requires more skill.


Code Compliance

RMC or IMC is always code-compliant for physical protection.

Installation

Use appropriate connectors to transition from MC cable to conduit (e.g., MC connector to a coupling). Secure the conduit to the block wall with conduit straps and appropriate anchors.

Recommendation

Given the information you provided:


I would strongly recommend transitioning to rigid metal conduit (RMC) or intermediate metal conduit (IMC) where the MC cable runs down the block wall, especially if the location is prone to any physical damage.
Important Considerations



Local Codes

Always check with your local building department or electrical inspector. They have the final say on what is acceptable in your area. Some jurisdictions are very strict about cable protection.

Professional Advice

If you're unsure about any aspect of the installation, consult a licensed electrician. Electrical work can be dangerous, and improper installation can lead to fires or other hazards.

MC Cable Type

Use the correct type of MC cable for the environment (e.g., outdoor-rated if exposed to moisture).

Summary:


While a nail plate
might* be acceptable in certain low-risk situations with careful installation, transitioning to RMC or IMC is generally the safer and more robust option, particularly when running along a block wall. Always prioritize safety and code compliance. Flag for review

Previous Question Next Question