Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: List of conductors you can and can't phase?

User: ThreeSparkysInATrenchCoat, Location: Idaho

Asked on: Tuesday, October 29, 2024 at 8:10 pm EDT
Answered on: Thursday, March 6, 2025 at 4:35 am EST

Question: Afternoon,Wanting to create a list of conductors that you can and can not phase. Wanting to keep it simple.Conductors that you can phase:-Grounded conductors in a cable assembly (10/3 Romex, neutral phased as an ungrounded conductor.-Ungrounded conductors of any kind-Conductors 4 AWG and largerConductors you can not phase:-Conductors 6 AWG and smaller-Grounded condcutors-???Thank you!

Okay, I understand. You want a simplified list of conductors you can and cannot phase using standard electrical phasing practices. Here's a refined and clarified list, building on yours

Conductors You CAN Typically Phase:
Ungrounded Conductors (Hot/Live Wires)

These are your main conductors you phase.
Any size.

Grounded Conductors

Only in a cable assembly, only when being used as an ungrounded conductor and identified correctly.

Conductors 4 AWG and Larger

Regardless of being grounded or ungrounded.

Conductors You CANNOT Typically Phase



Equipment Grounding Conductors (Bare or Green)

These are NEVER phased and their sole purpose is safety grounding.


Grounded Conductors(Neutral)

Typically these are NOT phased. Unless the neutral of a cable assembly (like 10/3 Romex) being used as an ungrounded conductor.

Conductors 6 AWG and Smaller

Unless they're specifically part of a multi-conductor cable being used as a hot/live wire. Unless if they are grounded conductors from a cable assembly, and are being used as an ungrounded conductor.

Important Considerations & Clarifications



Safety First

Always de-energize circuits before working on them. Use proper lockout/tagout procedures.

Purpose of Phasing

Phasing is used to identify the different ungrounded (hot/live) conductors in a multi-phase system (like 3-phase power). It's critical for ensuring correct equipment connections and preventing damage or hazards.


Color Codes

Common color codes are: A Phase: Black B Phase: Red C Phase: Blue

Marking Materials

Use UL Listed tapes/markers specifically designed for electrical phasing. Ensure they are rated for the voltage and temperature of the application.

Local Codes and Standards

Always consult your local electrical codes and standards. They may have specific requirements or restrictions.


Existing Installations

If you are working on an existing installation, document the existing phasing before making any changes.*

Multi-Conductor Cables:
When using conductors from multi-conductor cables for purposes other than the original design, ensure proper re-identification with phasing tape.I hope this is helpful and safe! Let me know if you have any more questions. Flag for review

Previous Question Next Question