Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Taking Master test tomorrow

User: Rollerfosho, Location: St. Pete FL

Asked on: Thursday, October 31, 2024 at 12:34 pm EDT
Answered on: Thursday, March 6, 2025 at 4:41 am EST

Question: I am taking the unlimited exam on Friday, and the biggest challenge I'm facing is determining which book contains the information needed to find the answers.I've been making progress in narrowing down the books related to the questions, but I still have some outstanding questions that have 4 to 5 possible reference books I need to consult.Does anyone have helpful tips or tricks to help me refine my search further?Additionally, I’m struggling with calculations. I have this material with me, including sections on transformers, service calculations, etc.Does anyone have advice on which calculations are most commonly featured in the exam questions?I greatly appreciate any help as I need to get this test passed

Okay, let's break this down and create a strategy for tackling the Unlimited exam. You're right, knowing where to look is often half the battle. Here's a combined approach focusing on source identification, calculation focus, and general exam strategies

I. Refining Your Search for Information (Book Identification)

This is the core challenge. Here are tactics to sharpen your book-searching skills: 1. Keyword Analysis: Drill Down on Specific Terms Identify the Core Concept

Before you even open a book, pinpoint the central concept of the question. Example: If the question is about overcurrent protection of a transformer, the core concept is transformer overcurrent protection.

List Specific Keywords

Once you know the core concept, brainstorm all possible keywords related to it. Examples for the transformer scenario: "transformer primary protection," "transformer secondary protection," "coordination," "fuse sizing," "circuit breaker sizing," "inrush current," "transformer impedance," "nameplate data," "tap settings." Think about synonyms and related terms.


Use Indexes Effectively

Go to the index of each of your candidate books. Don't just look for the exact question wording. Look for those keywords you generated. Often, an index will point you to multiple relevant sections, not just one.

2. Table of Contents (TOC) Analysis
Scan Chapter Titles and Subheadings

Don't just glance at the main chapter titles. Pay close attention to subheadings within each chapter. These often provide clues to more specific information.

Look for Clues in the TOC

Look for sections related to:
Application: Is the question about residential, commercial, or industrial applications? Specific Equipment: Is it about transformers, motors, generators, fire pumps, etc.? Installation Methods: Are you installing in conduit, cable tray, direct burial, etc.? Specific Articles or Chapters Many exams will use numbers specific to articles or chapters within the book. This is where a highlighter can really help.

3. Process of Elimination
Categorize the Question

Can you quickly categorize the question into a specific area like grounding, wiring methods, overcurrent protection, motors, etc.? This can immediately eliminate some books.


Consider Scope

Is the question dealing with general principles or very specific applications? A general reference book might be sufficient for the former, while a specialized handbook is needed for the latter.

Check Appendices/Tables

Some questions are directly answered by information contained in appendices or tables (e.g., conduit fill tables, ampacity tables, voltage drop tables).


4. Familiarize Yourself with Book Structures
NEC (National Electrical Code)

Understand how the NEC is organized. This is the book to master. Know what sections are in Chapter 1 (General), Chapter 2 (Wiring and Protection), Chapter 3 (Wiring Methods and Materials), etc.


Other References

Understand the general layout and focus of your other reference books. Are they primarily theory-based, application-focused, or code-related?

5. Practice, Practice, Practice!
Simulated Exams

The more practice exams you take, the faster you'll become at identifying the right books. After each practice exam, review why you chose the wrong book for any questions you missed.

Create a Reference List

As you study, keep a running list of common topics and the corresponding sections in your reference books where you consistently find the information.

II. Calculation Focus


You're right to focus on calculations. Here's a breakdown of common calculation areas:
1. Service Calculations (NEC Article 220 and Chapter 9)



Dwelling Unit Load Calculations (Standard and Optional)

Be proficient in calculating the general lighting load, small appliance branch circuits, laundry circuits, appliance loads, and demand factors. Understand the optional calculation methods for larger dwellings.


Commercial Load Calculations

Similar to dwelling units but with different demand factors and load characteristics. Pay attention to show window lighting, receptacle loads, and HVAC loads.

Feeder and Service Conductor Sizing

After determining the total calculated load, you need to size the conductors and overcurrent protection. Use ampacity tables (NEC 310.15) and understand derating factors for temperature and the number of conductors in a raceway.


Neutral Conductor Sizing

Don't forget to calculate the neutral load, especially for multiwire branch circuits.

2. Transformer Calculations (NEC Article 450)



Transformer Overcurrent Protection (Primary and Secondary)

This is very common. Understand the rules for primary-only protection, primary and secondary protection, and the maximum allowable overcurrent protection device sizes based on transformer impedance and voltage ratings.

Transformer Secondary Conductor Sizing

Size the conductors from the transformer secondary to the first overcurrent device, taking into account tap rules if applicable.


Transformer Sizing

Determine the required kVA rating of a transformer based on the connected load.

Impedance and Voltage Drop

Know how to calculate voltage drop across a transformer given its impedance.


Tap Settings

Understand how transformer tap settings affect voltage and current.

3. Motor Calculations (NEC Article 430)



Full-Load Current (FLC) from Tables

Know how to find the FLC of a motor based on its horsepower and voltage.

Branch-Circuit Conductor Sizing

Size the branch-circuit conductors to the motor, typically 125% of the FLC.


Overload Protection

Understand the requirements for motor overload protection (heaters or electronic overloads), typically sized at 115% or 125% of the FLC, depending on the motor's service factor and temperature rise.

Short-Circuit and Ground-Fault Protection (Instantaneous Trip Breakers or Fuses)

Size the short-circuit and ground-fault protective device, which can be significantly higher than the FLC.


Feeder Conductor Sizing for Multiple Motors

Calculate the feeder load for multiple motors, using the largest motor FLC plus the sum of the remaining motor FLCs.

Control Circuit Conductor Sizing

Understand the rules for sizing control circuit conductors.


Disconnecting Means

Understand the horsepower rating required for a motor disconnect.

4. Conductor Ampacity and Derating (NEC Article 310)



Ampacity Tables

Be very familiar with the ampacity tables (NEC 310.15).

Temperature Correction

Apply temperature correction factors based on the ambient temperature and the conductor's temperature rating.


Adjustment Factors for Number of Conductors in a Raceway or Cable

Apply adjustment factors when multiple current-carrying conductors are in the same raceway or cable.

Conduit Fill

Use tables to determine the maximum number of conductors allowed in a conduit.


5. Voltage Drop (NEC Informative Annex C)



Calculate Voltage Drop

Use the voltage drop formula to determine the voltage drop in a circuit.


Maintain Voltage Drop within Limits

Understand the recommended maximum voltage drop for feeders and branch circuits (typically 3% for feeders and 5% overall).

6. Grounding and Bonding (NEC Article 250)



Equipment Grounding Conductor (EGC) Sizing

Size the EGC based on the rating of the overcurrent protective device.

Bonding Jumper Sizing

Size bonding jumpers for services and other equipment.


Grounding Electrode Conductor (GEC) Sizing

Size the GEC based on the size of the service entrance conductors.

III. General Exam Strategies
1. Time Management

Pace yourself. Don't spend too long on any one question. If you're stuck, mark it and come back to it later.


2. Read Carefully

Pay close attention to the wording of the question. Small details can make a big difference.

3. Eliminate Wrong Answers

Even if you're not sure of the right answer, try to eliminate the clearly wrong ones.


4. Use Your Resources

The exam is open book for a reason. Don't be afraid to look up the answers.

5. Don't Panic

Stay calm and focused. You've prepared for this.

Specific Advice
Create a "Cheat Sheet" or Quick Reference Guide

Compile a sheet with the formulas you use most often, key table numbers, and common code references. This will save you time during the exam.

Practice Under Exam Conditions

Take practice exams in a timed environment, using the same reference books you'll have on the actual exam.


Identify Your Weak Areas

Focus your studying on the areas where you consistently struggle.*

Get a Good Night's Sleep:
Rest and preparation are key!You can pass this exam. Break down the material into manageable chunks, practice diligently, and use your resources effectively. Good luck! Flag for review

Previous Question Next Question