User: nizak, Location: Henrico County, VA
Asked on: Friday, November 1, 2024 at 11:49 am EDT
Answered on: Thursday, March 6, 2025 at 4:43 am EST
Question: Would anyone see a code violation in using LED under cabinet lights on top of the upper cabinets?I’ve got a 4” crown moulding that will hide everything.Was thinking of 24V LED tape but the dimmable drivers are pricey and I’d need quit a bit of it to cover the lineal footage.The plus’s to the fixtures are:- Dimmable-Reasonably priced- Will mimic the light output of the under cabinet lights.- Color selectable- Easy to installDon’t know if the wording on the packaging “Undercabinet” will be an inspection issue.ThoughtsThanks
You're asking a great question about a common and increasingly popular lighting technique. Here's a breakdown of the code compliance and practical considerations
Likelihood of a Code Violation:
In most cases, highly unlikely to be a significant code violation if installed correctly. The key is "installed correctly." The wording on the package saying "Undercabinet" is highly unlikely to be a problem. Inspectors are looking for safe installations, not strictly adhering to manufacturer marketing copy. Focus on Safety and Listed Use
The inspector will be concerned with how you installed it, not where the manufacturer suggested it should be installed. As long as the light fixture is used per it's Listed Use and all other requirements are followed, you should be fine.
Why It's Usually Okay (and What to Watch Out For)
Listing and UL/ETL Certification
The most important thing is that the LED fixtures are listed for use in enclosed or semi-enclosed spaces. Look for a UL, ETL, or CSA listing mark on the fixture itself and the packaging. This means they've been tested for safety, including heat dissipation. If the fixtures are not listed, that is a major code violation and safety risk.2.
Heat Dissipation
LED's, especially if the driver is built into the fixture, can generate heat. Ensure there's adequate airflow around the fixture. A 4" crown molding creates a bit of a closed space. If the instructions for the light fixture indicates there must be a certain clearance, ensure you follow those instructions.3.
Secure Mounting
Ensure the fixtures are securely mounted to the top of the cabinets. You don't want them falling.4.
Wiring Methods
This is critical. Use approved wiring methods. Common issues:
Strain Relief
Where the power cord enters the fixture, ensure there is proper strain relief so that tugging on the cord doesn't pull the wires out of the fixture.
Exposed Wires
All wiring must be enclosed in an approved raceway or the fixture's enclosure. No exposed wires are allowed.
Proper Connections
Use appropriate wire connectors (wire nuts or similar) for making connections inside junction boxes. Don't just twist wires together and tape them.
Junction Boxes (if necessary)
If you need to make wiring splices, they must be contained within a junction box that's accessible (even if it's behind the crown molding – technically accessible).5.
Accessibility
While you're hiding the lights behind the crown molding, you still need some level of accessibility for future maintenance or replacement. Make sure the crown molding is easily removable or that you can access the fixtures without major demolition.6.
Low-Voltage vs. Line Voltage
You mentioned 24V tape. If you're using line voltage (120V in the US), you must follow all applicable wiring codes. If you're using 24V, the requirements are generally less stringent, but still require proper installation techniques.
Addressing Your Concerns About "Under Cabinet" Labeling
It's not a problem. Inspectors are more concerned with safety and code compliance than marketing terms. As long as the fixture is rated for the application (heat, enclosed space, etc.) and installed correctly, the "under cabinet" label is irrelevant.
Alternative Considerations and Addressing the "Pricey Driver" Issue
Dimmable LED Drivers
You're right, quality dimmable LED drivers can be expensive.
Check for Compatibility
Make sure the drivers you're considering are compatible with your chosen dimmer switches. Not all dimmers work well with all LED drivers.
Centralized Driver (Power Supply)
Instead of individual drivers for each fixture, consider a single, larger dimmable LED driver (power supply) that feeds multiple LED fixtures. This can be more cost-effective for longer runs. You'll need to calculate the total wattage of your LEDs to choose a driver with sufficient capacity. Use appropriately sized wiring between the central driver and the LEDs!
Low-Voltage Wiring
With a centralized driver, you'll be running low-voltage (typically 12V or 24V) wiring to the fixtures. Low-voltage wiring has specific requirements, including wire gauge (size) based on the distance and current draw.
"Dimmable" Fixtures
Some LED "under cabinet" fixtures have built-in dimming controls or are designed to be used with standard dimmer switches. Check the specifications carefully.
LED Strip Lighting
While you mentioned it's pricey, reconsider LED strip lighting. The flexibility can be advantageous for even light distribution, and you can sometimes find better deals on drivers online than you think.
Consider Other LED Fixture Types
Shop around and compare different types of LED fixtures. There may be other options that are better suited to your needs in terms of price, light output, and ease of installation.
Recommendation
Choose Listed Fixtures
Prioritize fixtures with UL, ETL, or CSA listings. This is non-negotiable.2.
Read the Instructions
Carefully read and follow the manufacturer's instructions for installation, wiring, and clearance requirements.3.
Plan Your Wiring
Plan your wiring layout carefully, ensuring proper wire gauges, strain relief, and junction box locations (if needed).4.
Local Codes
Always check with your local building codes and inspector. They may have specific requirements that override general recommendations.5.
If Uncertain, Consult an Electrician: If you're unsure about any aspect of the electrical work, consult a qualified electrician. Electrical work can be dangerous if not done correctly.By following these guidelines, you should be able to install your LED lights above your cabinets safely and without code violations. Flag for review