Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Tripping Ch Dual Function Arc Faults

User: Electrician John, Location: Maryland

Asked on: Sunday, November 3, 2024 at 9:34 am EST
Answered on: Thursday, March 6, 2025 at 4:46 am EST

Question: Good morning, I have 2 cutler hammer arc fault breakers some times they trip together sometimes not, even when nothing is in use. From everything we have traced and dug into which seems to be everything on each circuit there is no crossing neutrals and the two circuits are not even in any of the boxes together. Any ideas? Thank you

Good morning! Intermittent, unexplained ARC fault breaker trips can be incredibly frustrating. Since you've already confirmed that there are no shared neutrals and the circuits aren't physically intertwined, we'll need to explore some more subtle possibilities. Here's a breakdown of potential causes and troubleshooting steps

1. Understanding Arc Fault Breakers:
What they do

AFCIs (Arc Fault Circuit Interrupters) are designed to detect dangerous electrical arcing (like a loose connection sparking) that could lead to a fire. They are
very sensitive and can be triggered by things that wouldn't trip a standard circuit breaker.

False Tripping

AFCIs can sometimes falsely trip. This is often due to electrical noise or interference on the circuit.

2. Common Causes of Intermittent AFCI Trips (Even with no load)



Neutral Problems (Even if you think you've checked)

This is still the most common cause. While you've checked for shared neutrals, subtle issues can still exist:


Loose Neutral Connections

A slightly loose neutral connection at the breaker panel, within a receptacle box, or even in a light fixture can cause voltage fluctuations that trigger the AFCI. This is especially true at the neutral bus bar in your breaker panel.

High-Resistance Neutral

Corrosion or damage to the neutral wire can create resistance, causing voltage imbalances.


Shared Neutral in Multi-Wire Branch Circuit (MWBC)

Double-check to make sure circuits are on opposite legs of the power coming into the house.

Electrical Noise/Interference



Appliances with Motors

Anything with a motor (refrigerators, freezers, washing machines, dryers, dishwashers, vacuum cleaners, power tools, etc.) can generate electrical noise that can sometimes fool an AFCI. Even motors on different circuits can potentially cause issues.

Electronic Devices

Some electronic devices with switching power supplies (computers, TVs, LED lighting, chargers) can generate harmonic currents that can interfere with AFCI operation.


External Interference

Less common, but nearby radio transmitters or other sources of electromagnetic interference could potentially cause issues.

Faulty AFCI Breakers

While less likely, the breakers themselves could be defective. It's possible you have two that are overly sensitive.


Wiring Issues



Nail or Screw Penetration

A nail or screw accidentally driven into a wire inside a wall can create a partial short that only causes problems intermittently. This is difficult to find.


Damaged Wire Insulation

Rodents, age, or physical damage can degrade wire insulation, leading to arcing.

Loose Connections

In any outlet, switch, or light fixture box, a loose wire connection (especially neutral or ground) can arc.


Environmental Factors



Humidity

High humidity can sometimes exacerbate existing wiring problems, leading to increased arcing.


Temperature

Temperature fluctuations can cause connections to expand and contract, potentially loosening them.

3. Troubleshooting Steps (in order of ease/likelihood)


Visual Inspection and Tightening



Breaker Panel

Turn OFF the main breaker.
Carefully inspect the connections at the AFCI breakers themselves, the neutral bus bar, and the ground bus bar. Ensure all screws are tight. Use a properly insulated screwdriver. Do not overtighten.



Receptacles and Switches

Turn OFF the power to the affected circuits. Systematically go through every receptacle and switch on those circuits. Check for loose wires, burned insulation, or any signs of damage. Tighten all connections securely. Make sure the wires are making solid contact with the terminal screws (or push-in connectors).

Light Fixtures

Inspect light fixtures for loose connections, especially in the neutral wire. Check the condition of the wiring inside the fixture.2.

Appliance Isolation



Unplug Everything

For a period, unplug everything on the affected circuits. See if the problem goes away.

Isolate Appliances

If the problem stops, start plugging things back in one at a time, monitoring the breakers. If a specific appliance triggers the trips, you've found a likely culprit. It might need repair or replacement. Consider moving it to a different circuit if possible.3.

AFCI Breaker Testing (Temporary Swap)



If Possible

If you have two AFCI breakers that are the same amperage and type, and their circuits are relatively similar in terms of load, temporarily swap them. If the trips follow the breaker, it's likely a faulty breaker. Make sure you label them clearly before swapping.

If you don't have spares or similar circuits

Purchase a new AFCI breaker of the correct type and amperage. Replace one of the existing ones. If the tripping stops, the old breaker was likely faulty. If it continues, replace the second breaker to rule out a double failure.4.

Voltage Drop Testing (More Advanced)



Requires a multimeter and knowledge of electrical testing. This involves measuring the voltage drop across various points in the circuit while a load is applied. Excessive voltage drop can indicate a loose connection or high resistance. This is best left to a qualified electrician.5.

Professional Help



If you've exhausted the above steps and the problem persists, it's time to call a qualified electrician. They have specialized tools and expertise to diagnose more complex wiring problems, including using a megohmmeter (megger) to check for insulation breakdown. They can also check for code violations that might be contributing to the issue. Explain to them all of the steps you have already taken.

Important Safety Notes



Turn off the power

Always turn off the power to the circuit at the breaker before working on any electrical wiring.

Use insulated tools

Use tools with insulated handles when working with electricity.


If you're not comfortable

If you are not comfortable working with electricity, do not attempt to troubleshoot this yourself. Call a qualified electrician.

Code Compliance

Ensure all work is performed in accordance with local electrical codes.

Additional Questions for You



When did this start happening? Did it coincide with any other electrical work, appliance purchases, or weather events?

What types of loads are typically on these circuits? Be specific (e.g., LED lighting, standard incandescent bulbs, specific appliances).


Are there any outdoor outlets or lighting on these circuits? Outdoor wiring is more susceptible to moisture and damage.

What is the age of the wiring in your home? Older wiring is more prone to problems.


Do you have aluminum wiring in your home? Aluminum wiring requires special connectors and precautions.Good luck! Let me know if you have any other questions, and please provide as much detail as possible. I hope you find the source of the problem soon. Flag for review

Previous Question Next Question