User: Jimmy7, Location: Boston, MA
Asked on: Monday, November 4, 2024 at 6:32 am EST
Answered on: Thursday, March 6, 2025 at 4:48 am EST
Question: Do you need to use noalox when using CO/ALR rated switches and receptacles? I haven’t had to deal with many homes with aluminum wiring.
The need for Noalox or similar antioxidant compound when using CO/ALR rated switches and receptacles with aluminum wiring is a common question. Here's a breakdown: CO/ALR Rating
CO/ALR stands for "Copper, Aluminum, Revised." Devices with this rating are specifically designed and tested for use with aluminum wiring. They typically have screw terminals made of a material compatible with both copper and aluminum, and are designed to provide a secure connection.
Manufacturer's Instructions are Key
Always follow the manufacturer's instructions that come with the CO/ALR devices. Some manufacturers may specifically require or recommend the use of an antioxidant compound, while others may not.
Generally Recommended
Even if the manufacturer's instructions don't explicitly mandate it,
many electricians and electrical safety experts recommend using an antioxidant compound like Noalox with CO/ALR devices and aluminum wiring. Here's why: Prevents Corrosion
Aluminum oxidizes very quickly when exposed to air, forming a layer of aluminum oxide. This oxide layer is non-conductive and can increase resistance at the connection point, leading to heat buildup, potential arcing, and fire hazards. Antioxidant compounds like Noalox help to prevent this oxidation.
Improves Conductivity
These compounds help to break down existing oxidation and improve the electrical contact between the aluminum wire and the terminal.
Provides a Seal
Noalox and similar compounds create a barrier that helps to prevent moisture and air from reaching the aluminum, further inhibiting oxidation.
Application
If using an antioxidant compound, apply it liberally to the aluminum wire before inserting it into the CO/ALR terminal. Make sure the compound covers the stripped portion of the wire.
Tightening Torque
It is critical to tighten the terminal screws on CO/ALR devices to the specified torque recommended by the manufacturer. Under-tightening can lead to loose connections, while over-tightening can damage the wire or the device. Use a torque screwdriver to ensure proper tightening.
In Summary:
While some CO/ALR device manufacturers may not explicitly require the use of an antioxidant compound, it's generally a good practice to use it. It enhances the safety and reliability of the connection when using aluminum wiring.Following the manufacture's instruction is the most important rule to follow.Make sure to tighten screws to the proper torque rating.When in doubt, consult with a qualified electrician experienced in working with aluminum wiring. They can assess your specific situation and provide tailored recommendations. Flag for review