Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Tiny butt splices?

User: TwoBlocked, Location: Bradford County, PA

Asked on: Friday, November 8, 2024 at 5:03 am EST
Answered on: Thursday, March 6, 2025 at 4:58 am EST

Question: Have an ongoing repair job where some PVC had to be cut to allow heavy machinery access into a outdoor containment area. The conduit contains a dozen or so 4 conductor, 18 ga instrumentation cables. Without going into detail, there will be enough slack and enough room in a trough for splicing. Am looking for very small gauge, uninsulated butt splices. The idea is to stagger the splices and seal with heat shrink tubing.Any suggestions for very small, uninsulated butt splices?

Okay, I understand the situation. You're looking for uninsulated butt splices for 18 AWG stranded wire, with a goal of minimal size to allow for staggering and heat shrinking within a trough. Here's a breakdown of considerations and potential solutions

Key Considerations:
Size is Critical

You want to keep the overall splice as small as possible to minimize the bulk in the trough, aid in staggering, and ensure the heat shrink can properly seal.


Secure Connection

Despite the small size, the splice needs to be mechanically sound and provide a good electrical connection to avoid future failures (especially important for instrumentation circuits).

Corrosion Protection

Outdoor environment means moisture is likely, so good sealing with heat shrink is essential.


Tooling

You'll need the correct crimping tool for the splices you select. Using the wrong tool can lead to unreliable connections.

Material Compatibility

Confirm the splice material (usually copper or tin-plated copper) is compatible with the instrumentation cable conductors to avoid galvanic corrosion issues.


Stranded Wire Compatibility

Ensure the butt splice is designed for stranded wire, as solid wire splices may not hold well.

Recommended Approach and Products


Micro Butt Splices

These are specifically designed for small gauge wire applications. They are available uninsulated. They are also sometimes referred to as Mini Butt Connectors.

Molex Micro-Fit 3.0 Uninsulated Butt Splices

Molex is a reputable manufacturer. Look for their "Micro-Fit 3.0" series, which often includes small butt splices that can work. Search online for "Molex Micro-Fit 3.0 Butt Splice" and review the specifications to ensure they are suitable for 18 AWG.


TE Connectivity/AMP Micro Splices

TE Connectivity (formerly AMP) also produces small, uninsulated splices suitable for instrumentation wire. Again, check the specifications to ensure they are rated for 18 AWG stranded.

Other Suppliers

Digikey, Mouser, Newark, and similar electronics distributors are your best bet for finding a wide variety of small butt splices. Use the filters to narrow your search by wire gauge, insulation type (uninsulated), and crimp type.2.

Crimping Tool



Matching Crimp Tool is Essential



The most important part is to get the crimp tool that is SPECIFICALLY designed for the butt splices you choose.
Using the wrong tool will result in a poor crimp that is likely to fail. The manufacturer of the splice will usually specify the correct crimp tool or die set. Ratcheting Crimper

A ratcheting crimper is highly recommended. It ensures a consistent, repeatable crimp with the correct pressure.3.

Heat Shrink Tubing



Adhesive-Lined Heat Shrink

This is crucial for outdoor applications. The adhesive creates a waterproof seal around the splice.

Proper Size

Choose a heat shrink tube diameter that will fit snugly over the completed splice (including the crimped butt splice and the exposed wire insulation).


Shrink Ratio

A 3:1 or 4:1 shrink ratio is ideal, as it allows the tubing to shrink down significantly and provide a tight seal.

Steps for a Reliable Splice


Preparation

Carefully strip the insulation from the ends of the wires to be spliced. Use a wire stripper designed for small gauge wire to avoid nicking or breaking strands. Strip only enough insulation to fit into the butt splice. Slightly twist the exposed strands of each wire to ensure they are compact and insert easily into the butt splice.2.

Crimping

Insert both stripped wire ends into the butt splice. Ensure the wire is fully inserted and visible within the splice. Use the correct crimping tool to crimp the butt splice. Make sure the tool is positioned correctly and the crimp is fully completed. Inspect the crimp. It should be tight, secure, and not show any signs of loose strands or damage.3.

Insulation and Sealing

Slide a piece of adhesive-lined heat shrink tubing over one of the wires before making the splice. Center the heat shrink tubing over the completed splice, ensuring it covers the butt splice and extends slightly onto the wire insulation on both sides. Use a heat gun (not a lighter) to shrink the tubing. Start in the middle and work your way outwards to prevent air bubbles from being trapped. Continue until the adhesive flows out from the ends of the tubing, indicating a good seal.4.

Staggering

Stagger the splices so that they are not all located in the same area. This reduces the overall bulk and makes it easier to manage the wires within the trough. Aim for at least 1/2" (12mm) between splices.

Important Considerations and Warnings



Testing

After completing the splices, test the functionality of the instrumentation circuits to ensure the connections are good and there are no issues with signal integrity.

Local Codes and Regulations

Be sure to adhere to all applicable electrical codes and regulations regarding splicing and wire management in your area. Depending on your location and application, you may need to use specific types of splices or have the work inspected by a qualified electrician.


Professional Assistance:
If you are not comfortable or experienced with electrical work, it is always best to consult with a qualified electrician. Incorrect wiring or splicing can be dangerous.By following these steps and using high-quality materials, you can create reliable and durable splices for your instrumentation cables. Remember to prioritize safety and accuracy throughout the process. Flag for review

Previous Question Next Question