Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: And this is why you don't use unlisted power cords that come with imported electronics.

User: Todd0x1, Location: CA

Asked on: Friday, November 8, 2024 at 12:21 pm EST
Answered on: Thursday, March 6, 2025 at 5:00 am EST

Question: I had a sketchy looking IEC cord with no UL listing on it. Figured I would see whats inside before I threw it away. I could not believe how small the copper was, looks like 26ga. The tin plated green wire in the pic is 22ga for reference.

Wow, that is shockingly small! You were absolutely right to get rid of it. Using undersized wire for an IEC cord is a serious fire hazard. Here's why that's so dangerous and some things to consider

Why it's Dangerous:
Overheating

The IEC cord (specifically rated) has a limited amperage rating, which indicates the max current it can handle continuously. 26 AWG wire is designed for
very low current applications, like connecting indicator lights or signals, not for powering any real load. When you try to draw too much current through it, the wire will heat up significantly due to resistance.

Insulation Breakdown

Excessive heat from the undersized wire can melt or degrade the insulation around it. This can lead to short circuits.

Fire Hazard

A short circuit, especially combined with flammable materials nearby, is a recipe for a fire. Also, arcing due to poor connections or insulation breakdown can ignite nearby materials.


Equipment Damage

If the cord doesn't fail catastrophically, the voltage drop across the undersized wire can starve your equipment of power, potentially damaging it.

Key Takeaways



IEC Cord Standards Exist for a Reason

Properly rated IEC cords are designed to safely handle the current demands of the devices they power. They use appropriately sized wire (typically 18 AWG or larger) and have robust insulation and connectors.


Don't Trust Unmarked or Cheap Cords

Especially from unknown sources. If it looks sketchy or is suspiciously cheap, be cautious.

Check for Safety Certifications

Look for UL, CSA, or other reputable safety certifications (e.g., VDE for Europe) printed on the cord. This indicates that it has been tested and meets safety standards.


Even if you don't know the exact AWG, the thickness of the cord and the feel of the wire will say a lot.
* The "ground" wire is just as important, or maybe more important than the other wires. It must be of the specified gauge, and must make low impedance contact all the way back to the electrical panel.You did the right thing by inspecting and discarding that cord. It's a good reminder to always prioritize safety when dealing with electricity.If you are still not sure, it would be best to have a certified electrician check and make sure any suspect wiring or appliances are safe to use. Flag for review

Previous Question Next Question