User: M.ABDULLATIEF, Location: Egypt
Asked on: Monday, November 11, 2024 at 4:37 am EST
Answered on: Thursday, March 6, 2025 at 5:04 am EST
Question: Need clarification for Working space of the Dry MV transformer, is it required from the body of transformer 13.8/0.4 KV, or it shall be taken from MV termination box which is exposed from the transformer body?
The required working space for a dry-type medium-voltage (MV) transformer, like a 13.8/0.4kV transformer, must be measured from the MV termination box.
Here's a breakdown of why: Accessibility and Safety
The purpose of working space is to provide enough room for qualified personnel to safely and effectively perform tasks such as: Inspections Maintenance Testing Repairs Switching or operating MV equipment (like circuit breakers or fuses connected to the termination box)The MV termination box is where electrical connections are made at the high voltage side of the transformer. This is the area where live work might be required.
NEC/Standards Requirements
Electrical codes, such as the National Electrical Code (NEC) in the US, and other applicable national or international standards (IEC, etc.), specify working clearances around electrical equipment operating at various voltages. These clearances are specifically related to the exposed live parts or the enclosure containing those live parts,
which is the termination box. Transformer Body vs. Termination Box
The transformer's main body is often grounded and doesn't pose the same direct electrical hazard as the MV termination box, where high-voltage conductors and connections are present.
Therefore
Identify the MV Termination Box
Locate the enclosure where the medium-voltage conductors connect to the transformer. This is typically a metal box directly attached to the transformer.2.
Measure Working Space
Measure the required working space outward from the front of the MV termination box. The specific dimensions for the working space (width, depth, and height) will depend on: The voltage (13.8kV in your case) Whether the opposite side of the working space is grounded, insulated, or has exposed live parts at a different voltage. The requirements of the applicable electrical code (NEC or equivalent).
Key Considerations
Local Codes
Always consult and adhere to your local electrical codes and regulations. They may have specific requirements or interpretations related to working space around transformers.
Manufacturer's Recommendations
Review the transformer manufacturer's documentation. They may have specific installation requirements, including working space recommendations.
Qualified Personnel
Ensure that only qualified and trained personnel work on or near electrical equipment.
In summary, the working space is measured from the exposed live parts or the enclosure containing them, which, for a dry-type MV transformer, is the MV termination box. Flag for review