Mike Dolt Enterprises Logo Mike Dolt Enterprises

Topic: Proper wiring of general use receptacles

User: bsmale, Location: Gainesville, Florida

Asked on: Monday, November 11, 2024 at 10:24 am EST
Answered on: Thursday, March 6, 2025 at 5:04 am EST

Question: I hope this post finds someone who can help lead me in the correct direction--I am a Certified Electrical Contractor since 2003, and an Adjunct Professor at our local Apprenticeship Program (That happens to use Mike Holt's curriculum). I have found in my area and believe in general, there are VERY few contractors doing voltage drop calculations upon general use receptacles, specifically in homes; but overall, everywhere. We are allowed a maximum of 3% on branch circuits, and I find VERY few that test within spec, using a load inducer. Arc-fault requirements are becoming more prevalent, yet the actual percentage of time they do their job is low. Arc-fault breakers, I know for sure Square D, are rated at 120 volts, with a 3% tolerance—I have an email confirming this from Square D engineering. Power companies are increasing voltages on their lines to account for the increase in load, instead of fixing the cause of the problem. I personally have a customer that has random nuisance trips due to voltage spikes upwards of 126 volts—this is WAY out of tolerance for these breakers. Beyond that, on the branch circuits: If the wiring is not sized to accommodate the full load, at the farthest device, the voltage drop will put the breaker out of tolerance; and it will not function properly.I am attempting to inform our up and coming in class, but I feel this is NO WHERE near enough; how might I go about making the largest impact upon our trade?

You've identified a critical issue in the electrical industry: the lack of proper voltage drop calculations and their impact on the performance of safety devices like AFCI breakers. You're also right that it's a systemic problem, and tackling it requires a multi-pronged approach. Here's a breakdown of how you can make a larger impact, ranging from grassroots efforts to potentially influencing national standards

1. Strengthen Your Apprenticeship Program Impact:
Deep Dive into Practical Application

Your current efforts are a great starting point, but go beyond the textbook.


Hands-on Labs

Dedicate more class time to hands-on voltage drop testing. Have students design circuits, calculate voltage drop, build the circuits, and then measure the voltage drop under different load conditions. Use load banks and common household appliances to simulate real-world scenarios.

Troubleshooting Scenarios

Present students with scenarios of nuisance tripping AFCI breakers, dimming lights, and equipment malfunction. Challenge them to diagnose the problem and propose solutions, emphasizing voltage drop as a primary suspect.


AFCI Testing

Explicitly demonstrate how voltage drop interferes with AFCI functionality. Show how a loaded circuit with excessive voltage drop can make an AFCI breaker unreliable.

Real-World Examples

Share your own experiences (and those of other contractors, if possible) where voltage drop caused problems. Anonymize customer data if necessary, but concrete examples are powerful teaching tools.


Advanced Calculation Techniques

Don't just rely on simplified formulas. Teach them how to use software (e.g., Mike Holt's tools, SKM Power Tools, EasyPower, or even spreadsheet software) for more complex calculations, including accounting for conduit fill, temperature derating, and conductor bundling.

Emphasize the Cost of Neglecting Voltage Drop

Highlight the financial implications for customers (equipment damage, reduced lifespan, higher energy bills) and the potential liability for contractors (call-backs, warranty issues, safety concerns).


Mentorship & Continuing Education

Offer mentorship opportunities to graduates and consider developing continuing education courses for experienced electricians who want to brush up on voltage drop calculations and mitigation techniques.

Guest Speakers

Invite local utility representatives or electrical engineers to speak to your classes about power quality issues, voltage regulation, and the impact of voltage drop on the grid.

2. Engage with Local and Regional Contractor Associations



Presentations and Workshops

Offer to present on voltage drop and AFCI breaker issues at local contractor association meetings. Prepare a compelling presentation with data, real-world examples, and practical solutions.

Networking

Network with other contractors and inspectors. Share your findings and experiences, and learn from theirs. Building a consensus among contractors will make it easier to advocate for change.


Lobbying

Some contractor associations engage in lobbying efforts at the state and local level. Work with your association to advocate for stricter enforcement of voltage drop requirements and better training for inspectors.

3. Collaborate with Electrical Inspectors



Open Communication

Establish open communication with your local electrical inspectors. Share your findings on voltage drop and AFCI breaker performance.


Training for Inspectors

Offer to provide training to inspectors on how to properly inspect for voltage drop and how it affects AFCI breaker operation. This could be a joint effort with your contractor association.

Data Collection

Work with inspectors to collect data on voltage drop measurements during inspections. This data can be used to demonstrate the extent of the problem and justify the need for stricter enforcement.

4. Influence the National Level



NEC Code-Making Panel Input

The National Electrical Code (NEC) is revised every three years. You can submit proposals for changes to the NEC to improve voltage drop requirements or AFCI breaker standards. This is a complex process, but your experience and expertise would be valuable.

Form a Committee

Team up with other concerned professionals to develop well-researched and documented proposals.


Public Input

Attend NEC code-making panel meetings and provide public input on proposed changes.

UL Standards Involvement

Underwriters Laboratories (UL) develops safety standards for electrical products, including AFCI breakers. You can participate in UL standards development committees to advocate for better AFCI breaker performance under varying voltage conditions.


Industry Publications

Write articles for trade magazines and online publications about voltage drop and AFCI breaker issues. Share your knowledge and raise awareness among a wider audience.

Partner with Manufacturers

Contact AFCI breaker manufacturers like Square D and share your concerns about voltage tolerance and nuisance tripping. Encourage them to develop breakers that are more robust and less sensitive to voltage fluctuations. You can also ask them to provide more detailed technical documentation and training materials.


Professional Organizations

Consider joining organizations like the IEEE (Institute of Electrical and Electronics Engineers) or the IAEI (International Association of Electrical Inspectors). These organizations provide resources and networking opportunities to help you stay up-to-date on the latest developments in the electrical industry and advocate for change.

5. Public Awareness (Limited, but potentially impactful)



Inform Your Customers

Educate your customers about the importance of proper voltage drop and the impact it can have on their electrical equipment and safety. Offer to perform voltage drop testing as part of your services.


Website Content

Create informative content on your website about voltage drop and AFCI breakers. This can help to educate potential customers and establish you as an expert in the field.

Important Considerations



Documentation is Key

Back up your claims with data. Keep meticulous records of your voltage drop measurements, AFCI breaker tripping incidents, and communications with manufacturers and utilities. This documentation will be essential for making a strong case for change.


Focus on Solutions

Don't just complain about the problem. Offer practical solutions, such as proper wire sizing, voltage drop calculations, and improved AFCI breaker design.

Be Patient and Persistent

Changing industry practices and standards takes time and effort. Don't get discouraged if you don't see results immediately. Keep advocating for change, and eventually, you will make a difference.


Safety First:
Always prioritize safety in all of your work. Follow all applicable codes and standards, and never compromise on safety to save time or money.By combining these strategies, you can significantly increase awareness of voltage drop issues, improve the quality of electrical work, and ultimately, make the electrical system safer for everyone. You're already doing the most important thing - recognizing a problem and wanting to fix it! Good luck! Flag for review

Previous Question Next Question