User: arbur, Location: St. Louis
Asked on: Monday, November 11, 2024 at 11:20 am EST
Answered on: Thursday, March 6, 2025 at 5:04 am EST
Question: I am attempting to find an outdoor flush mount hardwired led motion sensor and so far have only come across IS360 from Steinel, and I don't think it is LED rated.STEINEL | Outdoor Motion Sensors IS 360BIS 360B - PIR. Outdoor 360° Ceiling Mount Sensor. The STEINEL IS 360 occupancy sensor is rain tight for safe reliable operation indoors and out. The sensors are passive infrared and respond to heat ra
You're right, finding a flush mount, outdoor rated, hardwired LED compatible motion sensor can be surprisingly tricky. Let's break down why and explore some strategies.
The Challenges
Flush Mount
The desire for a flush mount significantly limits options. Most outdoor motion sensors are designed for surface mounting (easier for wiring and weather protection).
Outdoor Rating
This is essential for durability. Look for "Wet Location" or "Weatherproof" ratings (IP ratings of IP65 or higher are good indicators).
Hardwired
This is important for reliability and consistent power. Battery powered are easier to find, but have their own drawbacks.
LED Compatibility
This is CRITICAL. Older motion sensors often used a triac-based switching mechanism. LEDs require a more robust relay that can handle the low inrush current that LEDs draw. Many older sensors can be damaged when used with LEDs. Newer sensors are almost always LED compatible, but always confirm.
Why the Steinel IS360 Might Not Be Ideal for LED
While Steinel makes excellent products, the IS 360B's documentation doesn't explicitly mention LED compatibility, and it's an older design. Without explicit confirmation, it's risky to use it with LED lighting. Contact Steinel directly to confirm. Don't rely on assumptions.
Strategies to Find Suitable Options
1.
Broaden Your Search Terms
Try these search terms: "Outdoor flush mount motion sensor LED compatible" "Ceiling mount motion sensor outdoor wet rated LED" "Soffit motion sensor hardwired LED" (Soffits are often where flush mount lights are located) "Outdoor recessed motion sensor LED"2.
Check Retailer Websites (Filter and Read Descriptions Carefully)
Home Depot, Lowe's, Ace Hardware, Menards, Amazon
These are good starting points. Use their filter options to narrow down your choices by:
Mounting Type
"Flush Mount," "Ceiling Mount"
Location
"Outdoor," "Wet Location"
Power Source
"Hardwired"
Lighting Technology
Look for "LED Compatible" or "Suitable for LED Lighting" in the product descriptions and specifications.
Specialty Lighting Stores
These often carry more professional-grade options.3.
Manufacturer Websites
Go directly to the websites of major motion sensor manufacturers:
Leviton
Known for reliable electrical components.
Eaton
A reputable electrical brand.
Hubbell Wiring Device-Kellems
Industrial-grade options.
Pass & Seymour (Legrand)
Offers a variety of sensor products.
Cooper Lighting (Eaton)
Focuses on lighting solutions, including integrated motion sensor lights.4.
Consider a Two-Part Solution (Motion Sensor + LED Fixture)
This might be the most reliable approach:
Find a compatible, flush-mount LED light fixture rated for outdoor use.
Use a separate, LED compatible motion sensor. You may be able to integrate the motion sensor into the light fixture's wiring.5.
Read Reviews and Q&A Carefully
Pay close attention to what other customers say about LED compatibility in the product reviews and Q&A sections. Sometimes, manufacturers don't explicitly state it in the main description but users will have confirmed it.
Things to Look For in Product Descriptions and Specifications
Explicit mention of "LED Compatible" or "Suitable for LED Lighting."
Relay type
A relay is more robust than a triac-based switch. Look for a sensor that uses a relay.
Load Capacity
Check the maximum wattage or amperage rating of the sensor's switch. Make sure it's sufficient for the LED lights you intend to use. Even though LEDs use less power, the inrush current can be higher.
Operating Voltage
Ensure it matches your wiring (usually 120V in North America).
IP Rating
Look for IP65 or higher for reliable weather resistance.
Example Search on HomeDepot.com (as of October 26, 2023)
I tried searching Home Depot using the following filters:
Mounting Location
Ceiling
Sensor Type
Motion
Features
Weather Resistant, Motion ActivatedThis brought up several options, including integrated LED fixtures with motion sensors, rather than just the sensor itself. This might be a viable path, as it guarantees compatibility. Read the descriptions very carefully to ensure they are truly flush mount.
Important Safety Notes
Electrical work can be dangerous. If you're not comfortable working with electricity, hire a qualified electrician to install the motion sensor.
Always disconnect the power at the circuit breaker before working on any electrical wiring.
Follow all local electrical codes.Good luck with your search! It may take some digging, but a bit of effort will get you what you need. Remember to double-check all specifications before purchasing and installing. Flag for review