User: olly, Location: Berthoud, Colorado
Asked on: Monday, November 11, 2024 at 5:56 pm EST
Answered on: Thursday, March 6, 2025 at 5:06 am EST
Question: I am sure 10's of 1000's of these 150w LED's are in garages. They seem like they would get good airflow... Would you fill cofortable installing them for a customer? I would guess your typical keyless is rated for a 60W definitely not 150W. Here is a picture:
Okay, let's break down the issues surrounding installing 150W LED lights in garages, focusing on safety and code compliance.
Concerns with Installing 150W LEDs in Garages with Standard Keyless Fixtures
Wattage Rating of Fixture
This is the primary and most significant concern. Your typical keyless porcelain or plastic socket is rated for a maximum of 60W, or maybe 75W in some cases. Exceeding this wattage creates a serious fire hazard. The fixture is simply not designed to handle the heat generated by a 150W LED, even with good airflow. The components within the fixture (wiring, socket material) can overheat, melt, short circuit, and potentially ignite surrounding materials.
Fixture Construction
Keyless fixtures are typically lightweight and not designed to support the weight of a heavier, more powerful LED. While some 150W LEDs are relatively light, others can be substantial.
Wiring
Standard residential wiring usually isn't the problem here, unless the wiring to the fixture is severely undersized (which is rare but possible in older homes). Generally, the branch circuit wiring (14 AWG or 12 AWG) supplying the garage lighting can handle the current draw of a 150W LED.
However, the wiring inside the keyless fixture itself is a MAJOR concern. It is thin and rated only for the specified wattage. Heat Dissipation
While a garage might seem to have good airflow, it's not a guarantee. In the summer, garages can get extremely hot, especially if poorly insulated. This further exacerbates the overheating issue with an overloaded fixture. Even with airflow, a fixture that's internally overheating due to excessive wattage will still pose a risk.
Code Compliance
Installing a 150W LED in a 60W rated fixture is a code violation in virtually every jurisdiction. Inspectors are trained to look for these types of issues, and it could lead to failed inspections and potential fines.
Why "10's of 1000's" of people doing it doesn't make it safe
Just because a lot of people are doing something doesn't make it safe or correct. Many homeowners are unaware of the electrical code and potential hazards. They might prioritize brightness over safety and not realize the risks involved. The fact that it's common doesn't negate the risk of fire or electrical shock.
What to do instead
Replace the Fixture
This is the correct and safe solution.
Install a fixture specifically rated for the wattage of the LED you want to use. Look for fixtures with a higher wattage rating (150W or greater) and that are designed for LED bulbs. These fixtures will have heavier-duty wiring and components. Consider a dedicated LED shop light or high bay fixture. These are designed for higher output and better heat dissipation in garage or workshop environments. Many are also vapor-tight or dust-tight, offering added protection. Make sure the new fixture is properly grounded. Verify the fixture is rated for the environment. If the garage is damp or subject to moisture, ensure the fixture is rated for damp locations.2. Use Lower Wattage LED Bulbs
If you want to keep the existing fixture, use LED bulbs that are within the fixture's rated wattage (60W or 75W, depending on the fixture). LEDs produce significantly more light per watt than incandescent bulbs, so you can still achieve good brightness with a lower wattage LED. For example, a 10-watt LED bulb can often produce the same amount of light as a 60-watt incandescent.3.
Add More Fixtures
Install additional lower wattage fixtures to increase overall brightness without overloading any single fixture.4.
Consult with a Qualified Electrician
Always consult with a licensed electrician if you are unsure about the safety or code compliance of any electrical installation. They can assess the existing wiring and fixtures and recommend the best and safest solution for your needs.
My Professional Opinion (as if I were an electrician)
I would absolutely not* be comfortable installing a 150W LED bulb in a standard keyless fixture. It's a clear safety hazard and a code violation. My responsibility is to ensure the safety of my customers and adhere to all applicable regulations. I would explain the risks to the customer and offer the recommended alternative solutions (replacing the fixture or using lower wattage bulbs). Doing anything else would be unethical and potentially expose me to liability. My reputation and my customer's safety are worth far more than a quick and easy (but dangerous) installation.
In Summary:
Don't cut corners when it comes to electrical safety. Always prioritize safety and code compliance over convenience or cost savings. Replace the fixture with one that is rated for the higher wattage of the LED you want to use. Flag for review