User: BShields, Location: Gloucester MA
Asked on: Thursday, November 14, 2024 at 8:45 am EST
Answered on: Thursday, March 6, 2025 at 5:11 am EST
Question: There is no info out there on how to read the Leviton 1000/2000 series meters anyone have any insight on this?
You're right, detailed documentation on reading older Leviton 1000/2000 series meters is scarce. These meters are relatively old, and Leviton likely doesn't support them as extensively as their newer models. However, let's break down what you'll likely need to know and the general approach to reading them, based on common features of similar electro-mechanical meters and available (limited) information
Understanding the Meter Type
Electro-Mechanical (Analog)
These are the likely type for the 1000/2000 series, featuring rotating dials or number wheels. Modern smart meters, by contrast, have digital LCD displays.
What information is on the meter face? Voltage and current information for the circuit. Determine the multiplier.General Approach to Reading an Electro-Mechanical Meter1. Identify the Dials (or Wheels)
Look for a series of dials or wheels, usually with numbers 0 through 9 on them. The number of dials/wheels indicates the number of digits in the meter's reading. The dials will usually have pointers that indicate the reading. On the meter there will be voltage and current information for the circuit and a multiplier to give you the correct power usage.2.
Reading the Dials (Right to Left)
Start with the rightmost dial (the one with the highest precision - usually representing the "ones" place). Read the number that the pointer is directly pointing at, or the last number it has passed.
Crucially, this often depends on the direction of rotation of the dial. Clockwise
If the dial rotates clockwise, read the number the pointer just passed.
Counter-Clockwise
If the dial rotates counter-clockwise, read the number the pointer is pointing directly at or the next number it will pass. Move to the next dial to the left and repeat the process. Continue until you've read all the dials.3.
Addressing the Rotation Direction
This is the trickiest part. Some dials rotate clockwise, and others counter-clockwise. You need to determine the direction of rotation for each dial. Sometimes the direction is indicated by an arrow above or below the dial. If not, observe the meter over a short period (e.g., a few minutes) to see which way each dial turns. The direction of rotation alternates (e.g., rightmost dial clockwise, next dial counter-clockwise, and so on).4.
Calculating Consumption
Read the meter today. Write down the number you get using the steps above. Read the meter at the beginning of the next measurement period.5. Apply the Multiplier The meter has a multiplier, take that number and multiply the usage for that time period to get the true usage.
Troubleshooting & Important Considerations
Dust and Grime
Carefully clean the meter face to ensure you can see the dials and numbers clearly. Use a soft, dry cloth.
Sticking Dials
Very old meters can have dials that stick or move erratically. This will lead to inaccurate readings. If you suspect a problem, contact a qualified electrician or your utility company.
Safety First
Do not attempt to open the meter or tamper with its wiring. Meters contain dangerous voltages. If you have any concerns, contact a qualified electrician.
Liability
Remember that the utility company is ultimately responsible for the accuracy of your meter readings for billing purposes. If you strongly suspect a problem, report it to them.
Photo Documentation
Take clear photos of the meter reading each time you read it. This can be helpful if you need to dispute a bill or track your usage over time.
If possible, provide a photo of your meter. This would allow for a more precise assessment. Flag for review